No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Acero Inoxidable 304
El cuerpo y la manija del grifo de la cocina están hechos de acero inoxidable 304, la superficie es fuerte y duradera, resistente a la corrosión y al óxido.
Agua Fría y Caliente Regulable
Enjuague las frutas y verduras en agua fría y las ollas y sartenes en agua caliente.
Grifo de Cocina Giratorio de 360 Grados
Aumentar el área cubierta por el lavado del grifo.
Material de acero inoxidable 304, antihuellas dactilares, antiarañazos.
Bobina de cerámica, resistente y duradera.
Giratorio de 360 grados, aumenta el área lavable.
El agua fría y caliente se puede ajustar para satisfacer diversas necesidades.
Grifo retráctil, se puede extender 40 cm.
Tim T.
Comentado en los Estados Unidos el 26 de marzo de 2025
These Thermal Grizzly Minus thermal pads work as expected. Simple to use and install. These pads come in a decent size, are easy to cut, and apply to whatever you need to mount a heatsink on. These pads also have a decent weight to them.Able to fit in my system with some material left over. With the thermal pad being non-conductive and decent softness the pad formed well enough with the heatsink sandwiching it over the PCB. So far it is better quality over the stock pads and has helped control the temps for running at higher clocks on the memory, as well as the other components it was placed over. Price is a bit up there, but decent quality and known brand.
Neptune
Comentado en los Estados Unidos el 17 de marzo de 2025
Thermal Grizzly is owned by Thermal Grizzly Holding GmbH, a German company founded by Eike Salow and Roman "der8auer" Hartung, a mechatronics engineer and known figure in the overclocking community"This is hands down my most trsuted computer parts company in the modern day, it' run by actual community enthusiast, and people who go out of their way to make the absolute best parts money can buy. Is Thermal grizzly expensive? Yes.. but when you really think about it they are not. When you've wasted money like I have on Thermal paste and thermal pads you begin to realize that TG is usually only a few dollars more and I've never not one time had a single issue out of TG since I started buying their products.The Minus "Basic" and "Advanced" thermal pads..Cards serviced and tested with these pads at one time: Asus strix 1070Ti / EVGA FTW 1080 / EVGA FTW 1080Ti (2 customer cards and one personal card)This is far from the first time I've used these pads, i've been using these for cutomer cards and peronsla cards since they came out, and I would usggest them over any OEM pad period. They have stayed consistent over the years and I've never received a bad batch like I have with other companies, to the point I don't even waste my time with anything lowe than TG. I usually see a 5-7F in temps fromthese ads over OEM.The advanced pads are exactly better in temps, they more so seem to last longer and be overall stringer that the basic pads, hoever they are harder to cut but easier to work with.Another positive towards these pads noth the basic and advance is how easy they are to work with, i don't know what kind of magic they are using but I've always found them to be very easy to work with as they don't tend to walk away from their postion as much as the other pads.Don't waste your time or oney, and take the guess work out of buying thermal pads and solutions. I've been buying from this company since 2015, and I've never had to return anything or gothrough days of emails back and forth. This is a company owned by people like us who do this as a hobby or prefessionally and when time is money, and mistakes can cost you both i got with Thermal Grizzly anytime I can.
Leticia
Comentado en México el 4 de febrero de 2025
Muy práctico y de buena calidad hasta el momento funciona muy bien
P. Wells
Comentado en los Estados Unidos el 5 de abril de 2025
wow this stuff is slick. Its very pliable, tacky without being "sticky" I have used this stuff on some nvme heat sinks, some VRM's on a motherboard without any heatsinks, and this stuff just laid down right where I needed it, and now the temps are well under control what a difference it makes. I've tried other thermal pads, even some of the head sinks I ordered came with pads that I looked at side by side and if just physical appearance and texture are anything to go by, this is the stuff I will be using from now on. One of my nvme drives that was prone to running a little hot is now chillin with the addition of this and a little low profile aluminum heatsink. Its easy to cut and manipulate and seem to do a fantastic job of transferring heat away from my components. Currently I'm stress testing a system that I added a nvme heatsink to, idle temps are typically about 30c and with a full system 95% load going the drive never got over 45c. I removed the gpu from the test and without the extra heat from that the drive is dropping now down to 39c. Before when I'd run this test the drive would get up to about 65c or so. I'm pleased with the improvements I've seen.
Jacob
Comentado en los Estados Unidos el 29 de abril de 2025
I picked up a bunch of different sized thermal pads for repairing some issues with a very large vapor chamber on a razer blade 13 with some issues. Factory misapplied the original pads and now it's all a mess. Material is very forgiving to work with - clean cuts, moderate tack, no crumbling. Thickness is even, compressibility is decent even with uneven contact points.. A reliable basic pad that does it's job extremely well.
Teejay
Comentado en los Estados Unidos el 19 de abril de 2025
Used this to bridge the gap between the NVME SSD heatsink and the base of my laptop, works great and reduced my temps from 70*c down to 60-65c now that the heat is transferred to the base of the laptopCan't go wrong with this!
salvador
Comentado en México el 13 de agosto de 2024
El terminado se ve elegante se ve bien pero el soporte la mueve mucho y si lo giras fuerte se patina y ya no hace fuerza por lo tanto queda el grifo muy flojo
Roberto Carlos
Comentado en México el 29 de marzo de 2024
Excelente sin problemas se conecta directo a la tubería en México no necesite nada extra
César
Comentado en México el 15 de marzo de 2024
No se pudo cargar el contenido.
Axel B.
Comentado en México el 30 de enero de 2024
Funciona bien, pero no debes halar la mangera por fuera, porque la tuerca para fijar el grifo es de plastico y no de dejar apretarlo muy bien.
Jimi A. Tun
Comentado en México el 1 de abril de 2024
Muy buen producto
Janet Méndez Gómez
Comentado en México el 20 de julio de 2023
Me llegó muy rápido, lo único malo es que venía con una pequeña abolladura en la base que no afecta su funcionamiento, y el peso que incluye igual venía algo bretado, pero igual no afecto su función. De ahí en fuera cumple con su labor y con lo que promete, buen chorro de agua en sus 2 modalidades. Viene todo en acero inoxidable, a excepción del peso y la tuerca que apreta la base de la toma de agua. Lo recomiendo por el precio.
William A. Jimenez
Comentado en México el 6 de diciembre de 2023
Luce muy bien, pero esperaba un material mas denso y resistente.
Productos recomendados
Mex $1,144.09
Mex $ 457 .00 Mex $457.00