No hay artículos en el carro
No hay artículos en el carro
Especificaciones:
Marca: icepc.
Número de modelo: 2242 SSD Disipador de calor
Conductividad térmica: 5300 W/m-k
Tipo de accesorios: Disipadores térmicos
Material: Cobre Grafeno.
Tamaño: 35 x 23 x 9 mm.
Peso: 26 g.
Cantidad: 1 unidad.
El paquete incluye:
1 disipador de calor.
1 destornillador.
5 tornillos.
4 almohadillas para orejas térmicas de silicona.
evolzeroangel
Comentado en los Estados Unidos el 4 de marzo de 2025
I was dubious as to whether or not my plan was going to work. I wanted to install an extra NVME drive in the third pci-e slot of my motherboard, but there was a pcie psu cable directly in the way of where the drive's heatsink would sit, so I formulated a plan. I bought a Sabrent gen 4 adapter, took the heatsink assembly off so it was just the PCB, then installed two separate heatsinks on the nvme, this one for the controller half, and a thinner copper one which could barely fit without contacting the offending power header or cable.I have never seen such good temps, I used Gelid ultimate 0.5mm thermal pads, but made sure to separate them into their own heatsink areas, nothing connecting the two different heatsinks. This stops the heat from the controller from going anywhere except into it's own heatsink. I'm stunned. I've ordered 6 more of these and am replacing the motherboard heatsinks to see if I can get those drives cooler as well, as they sit beneath the GPU and get a little warmer than I would like. Time will tell for that one..
Productos recomendados
Mex $348.41
Mex $ 156 .00 Mex $156.00
Mex $151.35
Mex $ 83 .00 Mex $83.00
Mex $359.90
Mex $ 176 .00 Mex $176.00