Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

MAGID D-ROC ANSI A5 Guantes de trabajo con revestimiento de silicona resistentes al calor, 1 par, talla 5/XXS (GPD487)

Envío gratis en pedidos superiores a Mex $600.00

Mex $432.00

Mex $ 233 .00 Mex $233.00

En stock

1.Tamaño:7/s


Acerca de este artículo

  • Seguridad inigualable: ofrece resistencia al corte ANSI nivel A5, resistencia a la abrasión ANSI nivel 6 y resistencia a la perforación ANSI nivel 3 para una máxima protección
  • Mejora del agarre: equipado con revestimiento de palma de silicona para un agarre seco superior, mayor resistencia al calor y prevención de la adherencia; evita la acumulación de sellador y fusión en caliente
  • Versatilidad: cuenta con una carcasa HPPE+ de calibre 13 que es ligera, transpirable y ofrece una excelente protección contra cortes
  • Fiabilidad: rigurosamente probado por H.B. Más completo y PPG para garantizar calidad y fiabilidad
  • Fácil mantenimiento: adecuado para tareas como fabricación de ventanas y puertas, trabajos de fusión en caliente y sellador, fabricación de electrodomésticos y automóviles, manejo de vidrio, manejo de metal, fabricación de metal y estampado de metal; diseño lavable a máquina promueve la longevidad y la limpieza, extendiendo la vida útil del guante


El MAGID GP487 es un guante de trabajo de seguridad avanzado diseñado para ofrecer protección de alto nivel y comodidad para una variedad de usos. Cuenta con una carcasa HPPE+ de calibre 13 que es ligera, transpirable y proporciona una excelente protección contra cortes. El guante está equipado con un revestimiento de palma de silicona para un agarre seco, una mayor resistencia al calor y resistencia a la adherencia, evitando la acumulación de sellador y fusión en caliente.

Este guante ha sido rigurosamente probado por H.B. Más completo y PPG para garantizar calidad y fiabilidad. El diseño lavable a máquina promueve la longevidad y la limpieza, extendiendo la vida útil del guante. Con resistencia al corte ANSI nivel A5, resistencia a la abrasión ANSI nivel 6 y resistencia a las perforaciones ANSI nivel 3, este guante ofrece la máxima protección. Adecuado para tareas como fabricación de ventanas y puertas, trabajos de fusión en caliente y sellador, fabricación de electrodomésticos y automóviles, manejo de vidrio, manejo de metal, fabricación de metal y estampado de metal, el GP487 es la opción preferida para los profesionales que buscan protección de mano de primera categoría.


Sherry L
Comentado en los Estados Unidos el 19 de marzo de 2025
Nice gloves for heat protection and also for cut proof. I bought these to wear while doing stained glass. The gloves are a bit tight so I think sizing runs small. I am hoping that they will become more flexible as I wear them as right now they are not the most comfortable to wear.
Carmen
Comentado en los Estados Unidos el 8 de enero de 2025
It is very funcional, it fits so confortable that it doesn’t feels as if you have gloves on your hands.I love it.
JustMe
Comentado en los Estados Unidos el 16 de febrero de 2024
I use these gloves for stained glass work. They protect my hands sufficiently from cuts and glass slivers. I haven't tried them out yet on the heat protection but so far they seem like solid gloves for stained glass. They have certainly protected my hands from glass and cuts.
Aide
Comentado en México el 1 de noviembre de 2024
Fue un regalo mi esposo, le quedaron bien de tamaño evitan cortaduras y son buena clase, llegaron antes de la fecha programada bien empacadas y sin problemas, muy recomendables
ZP
Comentado en los Estados Unidos el 29 de octubre de 2024
Very flexible for the amount of protected coating. Very comfortable. Bought for soldering but I find myself wanting to use them all the time, or atleast when I’m working on a project or just working in general.
neal
Comentado en los Estados Unidos el 26 de abril de 2022
I've been playing wannabe arborist with these gloves for a few days after tearing through my last two sets of name brand automotive work gloves in 2-3 recreational climbs. They fit pretty well and provide decent dexterity. I am able to operate carabiners and snaps with ease. The only visible wear so far has been the decals on the backs of the hands, but who cares?The only reason its not 5 stars is that I can get a comparable glove for 1/3 of the price, which I ordered at the same time as these. I ordered these since they would ship quicker than the other pair. I plan to fully test the others to the same extent. The winner will be the new go-to glove for what I'm doing.Update: These gloves lasted a month, but my climbs have gotten more arborist and less recreational. The underlying glove is still fine but the coating wore off to the point they were requiring more effort for grip. They are still usable for typical yard work and the cut resistance remains intact.For reference:1 star - Typical mechanix brand or similar: 2-3 days before my skin became visible through holes in finger tips4 stars - This item: about a month before coating wore to the point that it grip was compromised.3 stars - Another glove of this brand: "MAGID D-ROC Lightweight Hyperon NitriX Grip Technology Palm Coated Work Gloves - Cut Level A7" about 2 weeks before the coating was gone. Still usable for normal yard work stuff though.
Productos recomendados