No hay artículos en el carro
No hay artículos en el carroLa manguera de aire híbrida de 1/4 pulgadas x 30 pies, complementada con un completo kit de accesorios de 12 piezas, es el compañero perfecto para tareas intrincadas y aplicaciones versátiles.
Customer
Comentado en los Estados Unidos el 7 de enero de 2025
Works great for light duty garage use. The air chuck and the air gun both ok quality. Nice they threw an air pressure stick gage in there too.
Eli F.
Comentado en los Estados Unidos el 27 de abril de 2025
Great product and is holding up to daily commercial use
Alba Sánchez Armendáriz
Comentado en los Estados Unidos el 3 de abril de 2025
Esta muy bien se ve de buena calidad y se acopla al compresor que compre
Logan Elliott
Comentado en los Estados Unidos el 9 de abril de 2025
Works as shown
J
Comentado en los Estados Unidos el 10 de diciembre de 2024
This was so easy to put together. Just about everything needed to revive an old compressor is included. Personally, I'm thinking it would look good in a garage where bicycles, basketballs, and the occasional tire need air.The air blaster handles balls and rafts, and the threads match up with many other blaster attachments. The rubber hose shines. It may be only 1/4," but that combined with a 30' length makes it perfect for a small air compressor installation. Much easier than lugging around a 1/2" hose or even 3/8" when all one needs to do is a basketball. Even a vehicle tire airs up fine. The compressor itself is often the weak link.Those with shops and/or large air tools may have already passed this by. It's not designed for jackhammers and large air ratchets.Pros:*Everything needed to connect to a compressor and air up items such as tires (of all sizes, even bicycles and hard-to-reach areas).*Nozzle for Schrader valves double-sided and angled for maximum applications*Fittings mostly leak-free and easy to assemble and disassemble with tape.*Quick disconnects work well. Good springs and much easier to use than many larger size fittings. Hands of all sizes should appreciate this aspect.Cons:Not a lot.*No instructions, but none should be needed. Wrap threads in the proper direction with tape and go. The leaks noticed tiny and almost negligible.*I did use a tiny bit of non-drying pipe goop to seal small leaks. About a 0.5mm bead of goop around the tip of each male thread sealed the leaks.*The tips for the ball inflators did not fit properly, though they did function.The ball inflators fit better in a similar blower nozzle that is many years older. I swapped them out. I cleaned off the goop with disposable rags, as that stuff adheres to anything it touches, to make this set nice and clean for whoever uses it. Curious how/why the inflators didn't fit the blower. The blower itself feels like the handle was twisted so as to offset the plunger, and that, of course, has nothing to do with the output end threads. For me it was no big deal to replace it, though I hope I just happened to get a rare bad one. Still a good product.I like the hose especially. Lightweight, pliable, handy for so many jobs. Some call hoses like these whips, though others reserve that term for the lighter-weight, not-so-pliable vinyl hoses. Lots of good parts with this kit. Recommended
Productos recomendados
Mex $688.99
Mex $ 358 .00 Mex $358.00
Mex $281.89
Mex $ 155 .00 Mex $155.00
Mex $157.70
Mex $ 91 .00 Mex $91.00
Mex $97.00
Mex $ 49 .00 Mex $49.00