No hay artículos en el carro
No hay artículos en el carro
Nota importante:
Esta manija exterior de la puerta se encuentra en el lado delantero izquierdo del conductor.
Utiliza este mango para que tu puerta vechile funcione perfectamente una vez más.
Verifica cuidadosamente tu coche por año, marca, modelo en los detalles del producto o comprueba las imágenes de tus piezas, número de pieza con el nuestro antes de comprar para evitar una compra incorrecta y gastos innecesarios.
★ En TYT Autoparts, nos enorgullecemos de la calidad de nuestros productos y de tu satisfacción. Si tienes algún problema, no dudes en ponerte en contacto con nosotros.
¡Gracias por tu apoyo!
Compatible con los siguientes vehículos:
Compatible con manija de puerta Nissan Rogue 2010.
Compatible con manija de puerta Nissan Rogue 2011.
Compatible con manija de puerta Nissan Rogue 2012.
Compatible con manija de puerta Nissan Rogue 2013.
Reemplaza el número de pieza: ▲
80640-CZ3lB
80645-CA000
80640CZ3lB
80640-CZ31A
80640CZ31A
80645CA000
Contenido del paquete: ▲
1 manija de puerta FL 10-13 80640-CZ3lB
mem.yoreh
Comentado en los Estados Unidos el 8 de diciembre de 2024
it's not an exact fit, there's a little resistance with the handle against the keyhole portion when closing. i have to manually push the handle down to get the door to close properly. it's not ideal, but it's also a more practical and economic solution to an OEM handle replacement. it's also a quick fix, just one plug once the door panel is off. just wish it was a smoother motion opening and closing. the keyless entry button works, but i notice i have to give it a moment to register, not sure if that's how they all are or not as the handle was broken on the rogue from the moment i got it. works fine, the only real issue is having to press the handle in to get the door to close, and even then, it's not that big of a deal all things considered.
Customer
Comentado en los Estados Unidos el 16 de diciembre de 2024
This fit on a 2013 rogue. Look on YouTube how to replace. Make sure you suction cup or tape the window up good so it doesn’t fall during assembly! Job was easy just time consuming. Take your time and follow the video. Make sure you reach behind the panel to bolt up to the window regulator.The handle is the same cheap plastic as the factory one. They look pretty much identical. The one problem I had, I don’t know if I routed a cable wrong or the specs were a bit off. See the pic, sometimes it doesn’t fully pull the handle back in. It will still latch and lock, just sticks out some. I tried filing a bit of plastic off but didn’t seem to help. It will seat if you push it.
Productos recomendados
Mex $490.08
Mex $ 254 .00 Mex $254.00