No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Profundidad de garganta: 2-3/4"
Apertura máxima de la mandíbula: 4"
Rosca de montaje: M8
Peso aproximado: 686g
Abrazadera montada en la mesa, 100 mm, capacidad máxima de la mandíbula, profundidad de garganta 2-3/4 pulgadas, longitud total 11 pulgadas, recomendado para soldadores profesionales y carpinteros.
Bloqueo y liberación rápidos para una fácil sujeción.
Bill Horvath
Comentado en los Estados Unidos el 22 de marzo de 2025
I ordered two of these, and neither one can clamp anything thin - There’s at least a quarter inch between the bottom of the shoe and the surface when they’re tightened all the way down. I’d choose something else if I were you until they get their quality control right.
Don
Comentado en los Estados Unidos el 13 de marzo de 2025
These are very similar to old school made in USA table clamps that are NLA. The only thing I don't like about them is the small 8 mm stud that holds them to the table. Aside from being a little thin, it requires it to be threaded into the clamp then one has to tighten a retaining nut to hold it to table. Very inconvenient! The old ones I have use a 1/2"-13 stud fastened to the clamp and then a large wingnut to hold it to table. I drilled out what is effectively an 8 mm rivnut with a half inch drill and then cut the head off of a grade 8 1/2"-13 bolt and welded it to the clamp and added a large wing nut to hold it down. This made it nearly identical to the old made in the USA clamp I have and works well. I deducted one star for small 8 mm stud.
Ronald Bibey
Comentado en los Estados Unidos el 5 de enero de 2025
Speedy delivery, as described.
tim harwood
Comentado en los Estados Unidos el 25 de marzo de 2024
Bought for my drill press. They work great. Very strong, well built.
MCPO
Comentado en los Estados Unidos el 12 de agosto de 2023
Is well built, clamps well with either wood or steel.Received two and tested each and Borge worked perfectly
Cliente de
Comentado en México el 28 de abril de 2022
Para prensar madera en mesa de trabajo
Productos recomendados
Mex $6,350.00
Mex $ 1,881 .00 Mex $1,881.00
Mex $874.09
Mex $ 472 .00 Mex $472.00
Mex $685.00
Mex $ 328 .00 Mex $328.00
Mex $923.07
Mex $ 479 .00 Mex $479.00
Mex $380.00
Mex $ 190 .00 Mex $190.00