Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Merrill MFG PRVNL75 Válvula de alivio de presión de latón sin plomo 75 PSI, 3/4 pulgadas

Envío gratis en pedidos superiores a Mex $600.00

Mex $493.07

Mex $ 266 .00 Mex $266.00

En stock

Acerca de este artículo

  • Las válvulas de alivio de presión son para protección contra la presión excesiva
  • 3/4 pulgadas. NPT macho x 1/2 pulgadas. FPT hembra
  • Latón sin plomo con resortes de control de acero inoxidable - Certificado IAMPO
  • Conexión de línea de 3/4 pulgadas, 75 PSI
  • No apto para calentadores de agua. Solo sistemas de agua fría



Descripción del producto

Banner of Merrill Manufacturing Valores de alivio de presión - Recomendado para todos los sistemas de agua fría

Características y ventajas

Foto de la válvula de alivio de presión de latón sin plomo Merrill Manufacturing

Talla

3/4 pulgadas. NPT macho x 1/2 pulgadas. FPT hembra

Foto de la válvula de alivio de presión de latón sin plomo Merrill Manufacturing

Clasificación de presión

Conexión de línea de 3/4 pulgadas, alivia la presión a 75 PSI. Campo ajustable.

Foto de la válvula de alivio de presión de latón sin plomo Merrill Manufacturing

Uso

La construcción de latón sólido sin plomo y resistente a la corrosión está diseñada para aliviar la presión excesiva en el sistema de agua. Recomendado para todas las instalaciones de sistema de agua fría.


N. Vollrath
Comentado en los Estados Unidos el 27 de marzo de 2025
The relief valve on my well froze at one point last winter so I got one of these to replace it. The first one lasted less than a week before it began dribbling out the relief port. I figured I must have a partial blockage in my system, so replaced the filters and confirmed all the lines flowed freely. It still was drooling so I bought another and replaced that one. Problem solved...I thought. It's been six months or so and now this one is doing the same thing, just a slow drip drip drip. The filters are clean, the pipes all flow freely without blockage, so I have to conclude that the relief valve is the issue. Seems like they aren't very long-lasting units. Maybe that has to do with being in direct Texas sunlight (heat) but these two are the first I've had cause issues in 12 years. Guess I'll try something more expensive.
Ian
Comentado en Canadá el 26 de febrero de 2025
I used this to replace a 75PSI relief valve that had failed. It fit and operated as per the spec.
Customer
Comentado en los Estados Unidos el 22 de febrero de 2025
Arrived as scheduled. Works as promised
Mark panek
Comentado en los Estados Unidos el 22 de enero de 2025
Works great
MBI
Comentado en los Estados Unidos el 4 de diciembre de 2022
This little thing is saving my pipes and fixtures from wear and tear from our high water pressure from city pipes. Our main water line can spike up to 140psi at any given time even with a new ZW main water pressure reducing valve, so I jimmied my pipes with this little thing and the pressure has not gone above 85psi. This thing typically starts discharging smalls amount of water when pressure touches 75psi, and really pours it on around 80psi. But it also does spike to a high of 85psi max when main water line peaks, I’ll take 85psi over 140psi any day.
Productos recomendados

Mex $257.00

Mex $ 149 .00 Mex $149.00

4.6
Elegir

Mex $855.07

Mex $ 444 .00 Mex $444.00

4.3
Elegir

Mex $326.49

Mex $ 163 .00 Mex $163.00

4.6
Elegir

Mex $954.71

Mex $ 486 .00 Mex $486.00

4.3
Elegir

Mex $154.15

Mex $ 80 .00 Mex $80.00

4.8
Elegir