Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Mgtgbao - Broca de núcleo de diamante, 1 pieza de 4 pulgadas (100 mm) con perforación en seco de 5/8-11 hilos para azulejos de porcelana, cerámica, mampostería, ladrillo, granito piedra de mármol

Envío gratis en pedidos superiores a Mex $600.00

Mex $699.99

Mex $ 314 .00 Mex $314.00

En stock

Acerca de este artículo

  • ✿Tamaños: Diámetro de la sierra de agujero: 100 mm. Conexión: 5/8"-11; Altura del diamante 15 mm, longitud total: 60 mm. Observación: Profundidad máxima de corte: 40 mm.
  • Materia prima de gran calidad: utilizando tecnología soldada al aspiradora, que aumenta la resistencia a la temperatura y la fricción, para hacer que las partículas de diamante se fijen mejor al acero del núcleo, mejora el rendimiento y la vida útil. Construido con grano de diamante de alta calidad para un corte sin esfuerzo y una mayor durabilidad en aplicaciones difíciles. Cuerpo de acero de núcleo de alta calidad ayuda a ser más eficiente y duradero, no se deforma fácilmente.
  • ✿Resistente: esta broca de diamante soldada al aspiradora es capaz de secar/perforar a través de porcelana, azulejos, granito, mármol, piedra, mampostería, bloque, ladrillo y hormigón no reforzado; no se recomienda para hormigón con refuerzo.
  • ✿Máquinas compatibles: broca de diamante seco construida con eje hembra de rosca de 5/8"-11 para la mayoría de las amoladoras angulares populares, pulidor húmedo; no utilices brocas de núcleo en modelo de martillo.
  • Tecnología de diamante soldado al aspiradora: más resistente y resistente al desgaste que la broca de diamante galvanizada, proporcionando una alta eficiencia, corta más rápido, duradero y resistente.



Descripción del producto

1 broca de núcleo de diamante

broca de núcleo de diamante

Brocas de diamante verde Mgtgbao

Características: altura del diamante: 15 mm. Longitud total: 60 mm. Longitud de corte: 40 mm. Se recomienda la máquina: Amoladora angular de rosca de 5/8-11 pulgadas. Otras brocas de núcleo de diamante disponibles: Tamaño pequeño: 3/16 pulgadas (5 mm), 1/4 pulgadas (6 mm), 5/16 pulgadas (8 mm), 3/8 pulgadas (10 mm), 1/2 pulgadas, 9/16 pulgadas (14 mm), 5/8 pulgadas (16 mm). Tamaño normal: 3/4 pulgadas (19 mm), 7/8 pulgadas (25 mm), 1-1/8 pulgadas (32 mm), 1-3/8 pulgadas (35 mm), 1-1/2 pulgadas (45 mm), 2 pulgadas (50 mm). Tamaño grande: 2-1/2 pulgadas (65 mm), 3 pulgadas (75 mm), 90 mm, 4 pulgadas (100 mm), 6 pulgadas (150 mm).

Cómo utilizar:

broca de núcleo de diamante

Aplicación:

broca de núcleo de diamante

Cuando estás construyendo/remodelando un baño o cocina como instalar la ducha o instalar el llave y las asas en el baño, tendrás que perforar agujeros a través de azulejos de porcelana sin agrietarse, por lo que puedes utilizar nuestra broca de punta de diamante para hacer que esos agujeros sean muy precisos

Características

broca de núcleo de diamante

Diamante de alta calidad

Los frijoles de diamante de alta calidad proporcionan una perforación más rápida y un mejor acabado.

broca de núcleo de diamante

Eliminación de virutas

Puede ayudar a disipar el calor y quitar el polvo para un rendimiento más eficiente y mejor

broca de núcleo de diamante

Logotipo y tamaños

Cada broca tiene la marca y el tamaño de mgtgbao en ella

broca de núcleo de diamante

Máquinas compatibles

Broca de núcleo de diamante seco construida con eje hembra de rosca de 5/8"-11 para amoladoras angulares más populares


Kc1328
Comentado en Canadá el 24 de enero de 2025
This drill does cut very well and lasts due to the diamond cutting edge.This works best in a drill press which will hold it steady when starting.Hand held this is very difficult to start accurately because its very hard to keep on target, it skips and slides off super easily. It does recommend that you start cutting at angle and slowly move perpendicular as it starts to cut but this method is not perfectly accurate.Its not just this brand but this design which there are many.With drilling large holes in wood big hole drill bits have a small hole drill bit in the center as a guide but that doesnt work for ceramic.You can get this to work, it just takes patience.
Pieti
Comentado en Canadá el 15 de noviembre de 2024
The plastic shipping cylinder protected the heavy drill bit from damaging anything around it, however the cylinder was too small and distorted making drill bit removal/replacement very difficult.I wish a drill chuck adapter had been included as I had to source one locally.Diamond drill bit was extremely robust and performed flawlessly with no evident damage after use. Reusable storage sleeve provided perfect protection once bit was replaced into it.I find this specific manufacturer, who supplies various sized bits, to be of elevated quality in production of their tools over the past year.
Paul C
Comentado en Canadá el 8 de octubre de 2024
it is not everyday you're going to need to cut a hole in tile this large; but for a shower fixture installation this accessory fits the bill. This bit will walk on you, so try it out on a practice hole first. Otherwise, it can get away from you and mar the exposed tile around the hole you are struggling to drill. Plastic body, so time will tell how durable this will be in the long run. You could spend considerably more on a big brand name bit that you may barely ever use, so this is a cost effective choice overall.
Customer Review
Comentado en Canadá el 7 de octubre de 2024
The Mgtgbao diamond core drill bit set is a steal for anyone who’s got some DIY skills. You need a bit of practice to get the hang of using these bits, so if you’re new to it, definitely try a few test runs on some scrap material first. Or, you could use a bit guide or a drill press to make things easier.The quality is pretty solid, especially for the price, since the big brands cost way more. I’ve only drilled a couple of holes for light fixture boxes (the 4" size is perfect) and in some tile so far, and it’s holding up great. I have struggled with tile before, it is is pretty tough, but these bits handled it no problem. They’re perfect for jobs where you can’t use water and need to drill dry; they stayed cool the whole time.
Shantelle L.
Comentado en Canadá el 23 de octubre de 2024
I’ve used this to make several ceramic coasters from extra ceramic tiles I had kicking around. The diamond core drill bit worked really well for my purpose and would work well for granite and quartz.
Productos recomendados

Mex $372.27

Mex $ 171 .00 Mex $171.00

4.4
Elegir

Mex $2,467.99

Mex $ 1,061 .00 Mex $1,061.00

4.9
Elegir

Mex $509.32

Mex $ 239 .00 Mex $239.00

4.5
Elegir

Mex $396.42

Mex $ 178 .00 Mex $178.00

4.7
Elegir