No hay artículos en el carro
No hay artículos en el carroMás información del producto
Ruben pacheco
Comentado en los Estados Unidos el 17 de junio de 2024
They fit perfectly, the noise I detected was nulled, and they are work great.. Moog rules!
salvador
Comentado en México el 16 de julio de 2023
mejor que los de tienda departamental
Emilio Barcenas del Castillo
Comentado en México el 10 de junio de 2022
Buen producto y llego rápido, Gracias.
Tony Cascio
Comentado en los Estados Unidos el 6 de diciembre de 2022
Testing the opening and they are stiff. Did a little trial run as I’m waiting for my breaker bar to come in. A tip : dunk them in really hot water for a little bit before you install them. That will make them much more flexible to open up and fit around the sway bar.Recap on install. 2004 jeep liberty. I finally received my 30" breaker bar. Money well spent for this job. Air Impact with extensions through the front fender openings would not crack the bolts loose. Breaker bar was key. I boiled some water, removed pot from heat and soaked the rubber bushing before installation. It was 35 degrees outside so it was a big help. Installing them around the sway bar went easy even though the slit are in a different location from the originals. Install both bushings on the sway bar first than put on the U clamps and tighten down. Don't install one side at a time and tighten. You will need both sides loose to get the bushings on. Car ramps would have been nice but improvised with some blocks. I had a air jack but did not want to raise the truck and cause extra stress on the sway bar being lifted. I believe it would be easiest in the vehicles original siting position. The Jeep rides like a new car now. No more squishing sounds over speed bumps or large street bumps. I didn't change out the sway bar end links because I wanted to do one thing at a time and hone in on the problem. All good.
Angel Reyes
Comentado en México el 14 de diciembre de 2022
Producto de buena construcción y calidad en los materiales, empaque cerrado y bujes originales, dejaré una reseña después de instalar
Carlos Cruz
Comentado en México el 25 de julio de 2021
Buena calidad...
Carlos
Comentado en México el 20 de febrero de 2021
Excelente calidad de primera cumplió mis espectativas
Fabián
Comentado en México el 29 de septiembre de 2021
Se ven muy robustos, de buena calidad, aun no los instaló pero se ven muy bien hechos
B Omeara
Comentado en Canadá el 22 de diciembre de 2020
Love this product. Beets the original
albert
Comentado en México el 25 de julio de 2019
Le queda bien al jeep liberty 2002 3.7 4x2
Tech267
Comentado en Canadá el 3 de diciembre de 2019
These arrived quickly, and are a perfect fit. I installed then in well under an hour, and they eliminated the sway bar “scrunch” noise immediately.
Customer
Comentado en México el 9 de enero de 2018
llego a tiempo y es un buen prodcto con calidad y facil de instalar. son de color azul y resistente.
Renegade
Comentado en los Estados Unidos el 24 de agosto de 2017
Perfect fit. Seems to be well made. Install was easy. I used a cold chisel to pry open the bushing. It slipped over the sway bar with ease with the aid of some poly grease. A standard socket with swivel joint and ratchet spanner loosens and removes the bolts with ease. I cant understand why some people say you have to use deep sockets for this task. Just make sure both front wheels are on level ground when doing this swap otherwise you will have problems fitting these bushes. Have fun and enjoy the ride after fitting these bushes.
Productos recomendados
Mex $914.26
Mex $ 411 .00 Mex $411.00
Mex $429.99
Mex $ 232 .00 Mex $232.00
Mex $759.90
Mex $ 387 .00 Mex $387.00
Mex $1,532.51
Mex $ 628 .00 Mex $628.00
Mex $1,695.29
Mex $ 728 .00 Mex $728.00
Mex $1,267.91
Mex $ 532 .00 Mex $532.00