Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

OM4 Fiber 3M/10FT, 10GB/40GB/100GB LC a LC Cable de conexión de fibra multimodo dúplex 50/125um, Opciones de longitud: 0.2m-100m, 2mm LSZH

Envío gratis en pedidos superiores a Mex $600.00

Mex $330.00

Mex $ 174 .00 Mex $174.00

En stock

1.Tamaño:100x145cm(39.3x57in)


2.:100x190cm(39x74inch)


Acerca de este artículo

  • 【Diseño estructural】Recibirás 8ternityFiber OM4 LC/UPC-LC/UPC 3M 1PCS; OD: 2.0 mm; modo: 50/125um; longitud de onda: 850 nm a 1310 nm. Adopta una chamarra LSZH, retardante de llama de alto rendimiento; la abrazadera de conector ajustable evita que la interfaz se afloje; la abrazadera dúplex permite una identificación rápida de Tx y Rx en caso de fallo de conexión; la virola de cerámica de circonita pulida UPC y hecha en japonés tiene una alta pérdida de retorno, baja pérdida de inserción y características de baja atenuación.
  • Radio mínimo de curvatura: el cable de conexión de fibra OM4 dúplex lc upc adopta núcleo y revestimiento de 50/125um, que es insensible a la flexión, fácil de pelar y soldar, asegurando una baja pérdida óptica y una transmisión estable (pérdida de inserción ≤0.3dB, pérdida de retorno ≥30dB), que es muy adecuado para 20 curvas en armarios o espacios de instalación de alta densidad. Es una opción ideal para aplicaciones de comunicación de corta distancia que admiten múltiples modos de propagación de luz o rutas.
  • Transmisión de larga distancia: el cable de conexión OM4 tiene una mayor tasa de transmisión y ancho de banda y se puede utilizar para Ethernet por debajo de 100 Gbps. Se utiliza más comúnmente para Ethernet 10G y principalmente para cableado de fibra óptica de centro de datos 10G/40G. Distancia Ethernet de 1 Gb 550 metros, distancia Ethernet de 10 Gb 300 metros, distancia Ethernet de 40 Gb 300 metros, distancia Ethernet de 100 Gb 200 metros, longitud de onda de 850 nm, ancho de banda de modo efectivo mínimo 2000 MHz. Km@850 nm.
  • Ampliamente utilizado: la fibra óptica multimodo OM4 se utiliza principalmente para la transmisión de datos de alta velocidad en aplicaciones de media y corta distancia. Es ampliamente utilizado en aplicaciones de red como centros de datos, LAN, SAN, etc. que requieren un alto ancho de banda y velocidades de transmisión rápidas. Incluye interconexión de centros de datos, intranets empresariales, redes de telecomunicaciones, etc. Ya sea que esté creando una nueva red o actualizando una red existente, puede satisfacer sus necesidades.
  • Servicio satisfactorio: 8ternityFiber se ha centrado en la producción y servicios de fibra óptica durante 20 años y tiene experiencia profesional en cables ópticos. Cada proceso estricto, incluyendo producción, pruebas, inspección inicial, inspección de patrulla, inspección final e inspección de envío, garantiza la calidad de cada cable. También contamos con un equipo profesional de servicio al cliente. Si tienes alguna pregunta, ponte en contacto con nosotros.


Cable de conexión de fibra OM4 LC a LC, 8ternityFiber 40GB/100GB Cable de fibra óptica Multimodo Duplex 50/125um, Opciones de longitud: 0.2m-100m, 2mm LSZH


prongATO
Comentado en los Estados Unidos el 23 de marzo de 2025
It’s not super easy to multimode LC duplex cables short enough for patch cables in a rack setup like I have. I installed an LC fiber patch panel in my rack and use that to patch fiber connections to my SFP+ 10Gb fiber transceivers. Instead of pulling out al my old Cat5E cable and replacing it with Cat6 or cat6A cables, I decided to run multimode LC duplex cables and a multimode MPO cable. The MPO cable has 6 pairs of fiber conductors and I used a breakout cable on one side, then attached the 6 LC duplex cables to the back of this patch panel. The three LC duplex jacks on the right side of the panel are discrete MMF runs to our living room and our secondary office. This cable is priced appropriately, if not on the cheaper side and functions perfectly. The LC terminations are properly installed and I measured little to no loss, so it’s a good quality LC patch cable. While it is only OM3 (denoted by the color aqua) that happens to be the quality of cable I ran for the discrete LC cable from the office to the secondary office. The rest of the fiber runs are OM4 or OM5 to help future-proof for 40Gb and 100Gb speeds in the future. The length of the cable turned out to be perfect for the patch I needed to make between the patch panel and the SFP+ transceiver. I had zero issues with connectivity or signal loss, that’s the beauty of digital connections, you either make a good connection or you don’t. If you need a good quality LC fiber patch cable, I recommend this brand highly.
Elmo&CookieMonster
Comentado en los Estados Unidos el 13 de febrero de 2025
I know shipping isn't the thing to really talk about, but if you have ever ordered small quantities of fiber cables, you know the pain -- the cable arrives in a padded envelope and if you are lucky some additional bubble wrap - and the envelope, although marked "Fragile" will have been folded, usually more than once with at least one hard crease.Then you are off to do a return return and hope the next one survives.This seller not only placed a single cable in a strong cardboard box, but the interior contained yet another cardboard structure to help avoid such breakage.I can count on one finger how many times I have seen cables arrive intact in padded envelopes.Now, on to the actual cable. (Sorry, still a little jazzed about not having to do a return and wait...)This is an OM4 rated 49' cable (15M for those of you who count that way) and should support 100GB traffic.I put this between two QSFP+ ports for a single 40GB link.Came up like a champ, no errors no drop outs - see the second image.And this:Full-duplex, 40Gb/s, auto negotiation: off, uni-link: n/aUp 3 hours, 25 minutes, 29 secondsLoopback Mode : None4 link status changes since last clearLast clearing of "show interface" counters 13 days, 1:31:49 ago5 minutes input rate 52 bps (0.0% with framing overhead), 0 packets/sec5 minutes output rate 396 bps (0.0% with framing overhead), 1 packets/sec8771 packets input, 1654076 bytesReceived 0 broadcasts, 8771 multicast0 runts, 0 giants0 input errors, 0 CRC, 0 alignment, 0 symbol, 0 input discards0 PAUSE input160404 packets output, 12144950 bytesSent 486 broadcasts, 159888 multicast0 output errors, 0 collisions0 late collision, 0 deferred, 0 output discards0 PAUSE output
Johnson
Comentado en los Estados Unidos el 10 de abril de 2025
Used it for a 10gbps link between two devices and it worked just fine. Got full speed from it without an issue.
Nick
Comentado en los Estados Unidos el 5 de abril de 2025
this fiber cable works great, and it has exceeded my expectations. The 3-meter (10ft) cable is perfectly suited for connecting devices up to 10GB, delivering fast and stable connections with minimal signal loss. The build quality is top-notch, and the connectors feel secure. It’s flexible enough for easy installation but still durable enough for long-term use. If you need reliable fiber for high-performance networking, this cable is an excellent choice!
Brett
Comentado en los Estados Unidos el 4 de abril de 2025
This fiber optic patch cable features OM4 multimode fiber with LC to LC duplex connectors, ideal for 10GB/40GB/100GB network speeds. The cable is 20 meters long (66 feet) and offers high performance with low attenuation. Its LSZH jacket provides fire safety, making it a reliable choice for both home and commercial use.
Productos recomendados

Mex $186.00

Mex $ 111 .00 Mex $111.00

4.8
Elegir

Mex $138.05

Mex $ 74 .00 Mex $74.00

4.5
Elegir

Mex $86.00

Mex $ 45 .00 Mex $45.00

4.3
Elegir