No hay artículos en el carro
No hay artículos en el carro El paquete incluye:
4 joysticks analógicos 3D.
4 palillos para pulgar.
4 tapas para pulgares.
1 destornillador de seguridad Torx T6.
1 destornillador de seguridad Torx T8.
1 destornillador de seguridad Torx T10.
1 herramienta de palanca triangular.
1 cepillo para polvo de limpieza.
2 herramientas de palanca de doble extremo.
Nader Hammoud
Comentado en los Estados Unidos el 31 de enero de 2025
I have a regular iron gun fir electronics, which proved to be not enough to dismantle the old keys and install new ones. To do this successfully you need a good iron gun and a better solder sucker. So you can tell that I ended up damaging my controller, but to no fault of this product, rather lack of proper tools. Which I hope this will help you plan better than I did.I ended up buying a new controller for $50
Nader Hammoud
Comentado en los Estados Unidos el 31 de enero de 2025
I have a regular iron gun fir electronics, which proved to be not enough to dismantle the old keys and install new ones. To do this successfully you need a good iron gun and a better solder sucker. So you can tell that I ended up damaging my controller, but to no fault of this product, rather lack of proper tools. Which I hope this will help you plan better than I did.I ended up buying a new controller for $50
Nader Hammoud
Comentado en los Estados Unidos el 31 de enero de 2025
I have a regular iron gun fir electronics, which proved to be not enough to dismantle the old keys and install new ones. To do this successfully you need a good iron gun and a better solder sucker. So you can tell that I ended up damaging my controller, but to no fault of this product, rather lack of proper tools. Which I hope this will help you plan better than I did.I ended up buying a new controller for $50
Nader Hammoud
Comentado en los Estados Unidos el 31 de enero de 2025
I have a regular iron gun fir electronics, which proved to be not enough to dismantle the old keys and install new ones. To do this successfully you need a good iron gun and a better solder sucker. So you can tell that I ended up damaging my controller, but to no fault of this product, rather lack of proper tools. Which I hope this will help you plan better than I did.I ended up buying a new controller for $50
Nader Hammoud
Comentado en los Estados Unidos el 31 de enero de 2025
I have a regular iron gun fir electronics, which proved to be not enough to dismantle the old keys and install new ones. To do this successfully you need a good iron gun and a better solder sucker. So you can tell that I ended up damaging my controller, but to no fault of this product, rather lack of proper tools. Which I hope this will help you plan better than I did.I ended up buying a new controller for $50
Nader Hammoud
Comentado en los Estados Unidos el 31 de enero de 2025
I have a regular iron gun fir electronics, which proved to be not enough to dismantle the old keys and install new ones. To do this successfully you need a good iron gun and a better solder sucker. So you can tell that I ended up damaging my controller, but to no fault of this product, rather lack of proper tools. Which I hope this will help you plan better than I did.I ended up buying a new controller for $50
Nader Hammoud
Comentado en los Estados Unidos el 31 de enero de 2025
I have a regular iron gun fir electronics, which proved to be not enough to dismantle the old keys and install new ones. To do this successfully you need a good iron gun and a better solder sucker. So you can tell that I ended up damaging my controller, but to no fault of this product, rather lack of proper tools. Which I hope this will help you plan better than I did.I ended up buying a new controller for $50
Nader Hammoud
Comentado en los Estados Unidos el 31 de enero de 2025
I have a regular iron gun fir electronics, which proved to be not enough to dismantle the old keys and install new ones. To do this successfully you need a good iron gun and a better solder sucker. So you can tell that I ended up damaging my controller, but to no fault of this product, rather lack of proper tools. Which I hope this will help you plan better than I did.I ended up buying a new controller for $50
PAOLA JANETH
Comentado en México el 16 de agosto de 2024
Me encantaron... Muy cómodos por que no tienen varillas, y bonitos... Ya compre tres en total hasta ahorita.
Sombra
Comentado en México el 12 de agosto de 2024
No son para controles originales, aún cuando el preemplazo lo hice bien me fallaron los controles, los demás accesorios bien.
Sombra
Comentado en México el 12 de agosto de 2024
No son para controles originales, aún cuando el preemplazo lo hice bien me fallaron los controles, los demás accesorios bien.
Sombra
Comentado en México el 12 de agosto de 2024
No son para controles originales, aún cuando el preemplazo lo hice bien me fallaron los controles, los demás accesorios bien.
Sombra
Comentado en México el 12 de agosto de 2024
No son para controles originales, aún cuando el preemplazo lo hice bien me fallaron los controles, los demás accesorios bien.
Sombra
Comentado en México el 12 de agosto de 2024
No son para controles originales, aún cuando el preemplazo lo hice bien me fallaron los controles, los demás accesorios bien.
Sombra
Comentado en México el 12 de agosto de 2024
No son para controles originales, aún cuando el preemplazo lo hice bien me fallaron los controles, los demás accesorios bien.
Sombra
Comentado en México el 12 de agosto de 2024
No son para controles originales, aún cuando el preemplazo lo hice bien me fallaron los controles, los demás accesorios bien.
Sombra
Comentado en México el 12 de agosto de 2024
No son para controles originales, aún cuando el preemplazo lo hice bien me fallaron los controles, los demás accesorios bien.
Oscar García
Comentado en México el 24 de mayo de 2024
Todo bien
Oscar García
Comentado en México el 24 de mayo de 2024
Todo bien
Oscar García
Comentado en México el 24 de mayo de 2024
Todo bien
Oscar García
Comentado en México el 24 de mayo de 2024
Todo bien
Oscar García
Comentado en México el 24 de mayo de 2024
Todo bien
Oscar García
Comentado en México el 24 de mayo de 2024
Todo bien
Oscar García
Comentado en México el 24 de mayo de 2024
Todo bien
Oscar García
Comentado en México el 24 de mayo de 2024
Todo bien
Erica
Comentado en México el 1 de marzo de 2024
Los materiales son buenos pero en la parte trasera, algunas costuras causan cierta molestia a piel sensible
Alis
Comentado en México el 1 de febrero de 2024
Lo recomiendo, excelente calidad
Charles T.
Comentado en los Estados Unidos el 29 de diciembre de 2024
The xbox controller I gave to my nephews started getting drift on the right stick. They asked if it could be fixed and I knew the only real fix would be to replace the stick. I'm happy that this set came with pretty much everything needed to do the repair minus the iron and soldering skills.When it came in I went to work on swapping out the old sticks for the new ones. Taking out the old sticks is pretty easy, even if you don't have extensive soldering skills. Mine are minimal and I didn't find it to be much of a challenge, all I used was a cheap basic 3M iron and some soldering wick. The board absorbs a lot of heat though, so a solder sucker would probably have worked better, but the wick worked. After taking out the old sticks, I put the new ones in and soldered them in without any issue.I put everything together enough to test and yes they are not perfect. While there's no longer any drift the right stick moves really slowly up, but very fast down. I didn't notice any issue with the other stick. So the problem might be with the stick, but also might be with the controller itself. My nephews are hard on things and I know it got tossed around a lot before it was given back to me.So, while they did fix the drift issue, I can't say with 100% certainty that they are working as they should be. It's not worth pulling back apart and swapping in another stick. They are mostly just playing fortnite and I think it's working good enough for that. If it starts to drift again, then sure, I'll swap it again.And again, if the soldering is keeping you from trying to do this fix, just give it a shot. The worst that happens is you have a controller that isn't working, which you already had, and you spend a few dollars getting the stuff to attempt the fix. Or you find that it is easier than you thought it would be and you gain a new skill and get a working controller again for a lot less than the price of a new controller.
Charles T.
Comentado en los Estados Unidos el 29 de diciembre de 2024
The xbox controller I gave to my nephews started getting drift on the right stick. They asked if it could be fixed and I knew the only real fix would be to replace the stick. I'm happy that this set came with pretty much everything needed to do the repair minus the iron and soldering skills.When it came in I went to work on swapping out the old sticks for the new ones. Taking out the old sticks is pretty easy, even if you don't have extensive soldering skills. Mine are minimal and I didn't find it to be much of a challenge, all I used was a cheap basic 3M iron and some soldering wick. The board absorbs a lot of heat though, so a solder sucker would probably have worked better, but the wick worked. After taking out the old sticks, I put the new ones in and soldered them in without any issue.I put everything together enough to test and yes they are not perfect. While there's no longer any drift the right stick moves really slowly up, but very fast down. I didn't notice any issue with the other stick. So the problem might be with the stick, but also might be with the controller itself. My nephews are hard on things and I know it got tossed around a lot before it was given back to me.So, while they did fix the drift issue, I can't say with 100% certainty that they are working as they should be. It's not worth pulling back apart and swapping in another stick. They are mostly just playing fortnite and I think it's working good enough for that. If it starts to drift again, then sure, I'll swap it again.And again, if the soldering is keeping you from trying to do this fix, just give it a shot. The worst that happens is you have a controller that isn't working, which you already had, and you spend a few dollars getting the stuff to attempt the fix. Or you find that it is easier than you thought it would be and you gain a new skill and get a working controller again for a lot less than the price of a new controller.
Charles T.
Comentado en los Estados Unidos el 29 de diciembre de 2024
The xbox controller I gave to my nephews started getting drift on the right stick. They asked if it could be fixed and I knew the only real fix would be to replace the stick. I'm happy that this set came with pretty much everything needed to do the repair minus the iron and soldering skills.When it came in I went to work on swapping out the old sticks for the new ones. Taking out the old sticks is pretty easy, even if you don't have extensive soldering skills. Mine are minimal and I didn't find it to be much of a challenge, all I used was a cheap basic 3M iron and some soldering wick. The board absorbs a lot of heat though, so a solder sucker would probably have worked better, but the wick worked. After taking out the old sticks, I put the new ones in and soldered them in without any issue.I put everything together enough to test and yes they are not perfect. While there's no longer any drift the right stick moves really slowly up, but very fast down. I didn't notice any issue with the other stick. So the problem might be with the stick, but also might be with the controller itself. My nephews are hard on things and I know it got tossed around a lot before it was given back to me.So, while they did fix the drift issue, I can't say with 100% certainty that they are working as they should be. It's not worth pulling back apart and swapping in another stick. They are mostly just playing fortnite and I think it's working good enough for that. If it starts to drift again, then sure, I'll swap it again.And again, if the soldering is keeping you from trying to do this fix, just give it a shot. The worst that happens is you have a controller that isn't working, which you already had, and you spend a few dollars getting the stuff to attempt the fix. Or you find that it is easier than you thought it would be and you gain a new skill and get a working controller again for a lot less than the price of a new controller.
Charles T.
Comentado en los Estados Unidos el 29 de diciembre de 2024
The xbox controller I gave to my nephews started getting drift on the right stick. They asked if it could be fixed and I knew the only real fix would be to replace the stick. I'm happy that this set came with pretty much everything needed to do the repair minus the iron and soldering skills.When it came in I went to work on swapping out the old sticks for the new ones. Taking out the old sticks is pretty easy, even if you don't have extensive soldering skills. Mine are minimal and I didn't find it to be much of a challenge, all I used was a cheap basic 3M iron and some soldering wick. The board absorbs a lot of heat though, so a solder sucker would probably have worked better, but the wick worked. After taking out the old sticks, I put the new ones in and soldered them in without any issue.I put everything together enough to test and yes they are not perfect. While there's no longer any drift the right stick moves really slowly up, but very fast down. I didn't notice any issue with the other stick. So the problem might be with the stick, but also might be with the controller itself. My nephews are hard on things and I know it got tossed around a lot before it was given back to me.So, while they did fix the drift issue, I can't say with 100% certainty that they are working as they should be. It's not worth pulling back apart and swapping in another stick. They are mostly just playing fortnite and I think it's working good enough for that. If it starts to drift again, then sure, I'll swap it again.And again, if the soldering is keeping you from trying to do this fix, just give it a shot. The worst that happens is you have a controller that isn't working, which you already had, and you spend a few dollars getting the stuff to attempt the fix. Or you find that it is easier than you thought it would be and you gain a new skill and get a working controller again for a lot less than the price of a new controller.
Charles T.
Comentado en los Estados Unidos el 29 de diciembre de 2024
The xbox controller I gave to my nephews started getting drift on the right stick. They asked if it could be fixed and I knew the only real fix would be to replace the stick. I'm happy that this set came with pretty much everything needed to do the repair minus the iron and soldering skills.When it came in I went to work on swapping out the old sticks for the new ones. Taking out the old sticks is pretty easy, even if you don't have extensive soldering skills. Mine are minimal and I didn't find it to be much of a challenge, all I used was a cheap basic 3M iron and some soldering wick. The board absorbs a lot of heat though, so a solder sucker would probably have worked better, but the wick worked. After taking out the old sticks, I put the new ones in and soldered them in without any issue.I put everything together enough to test and yes they are not perfect. While there's no longer any drift the right stick moves really slowly up, but very fast down. I didn't notice any issue with the other stick. So the problem might be with the stick, but also might be with the controller itself. My nephews are hard on things and I know it got tossed around a lot before it was given back to me.So, while they did fix the drift issue, I can't say with 100% certainty that they are working as they should be. It's not worth pulling back apart and swapping in another stick. They are mostly just playing fortnite and I think it's working good enough for that. If it starts to drift again, then sure, I'll swap it again.And again, if the soldering is keeping you from trying to do this fix, just give it a shot. The worst that happens is you have a controller that isn't working, which you already had, and you spend a few dollars getting the stuff to attempt the fix. Or you find that it is easier than you thought it would be and you gain a new skill and get a working controller again for a lot less than the price of a new controller.
Charles T.
Comentado en los Estados Unidos el 29 de diciembre de 2024
The xbox controller I gave to my nephews started getting drift on the right stick. They asked if it could be fixed and I knew the only real fix would be to replace the stick. I'm happy that this set came with pretty much everything needed to do the repair minus the iron and soldering skills.When it came in I went to work on swapping out the old sticks for the new ones. Taking out the old sticks is pretty easy, even if you don't have extensive soldering skills. Mine are minimal and I didn't find it to be much of a challenge, all I used was a cheap basic 3M iron and some soldering wick. The board absorbs a lot of heat though, so a solder sucker would probably have worked better, but the wick worked. After taking out the old sticks, I put the new ones in and soldered them in without any issue.I put everything together enough to test and yes they are not perfect. While there's no longer any drift the right stick moves really slowly up, but very fast down. I didn't notice any issue with the other stick. So the problem might be with the stick, but also might be with the controller itself. My nephews are hard on things and I know it got tossed around a lot before it was given back to me.So, while they did fix the drift issue, I can't say with 100% certainty that they are working as they should be. It's not worth pulling back apart and swapping in another stick. They are mostly just playing fortnite and I think it's working good enough for that. If it starts to drift again, then sure, I'll swap it again.And again, if the soldering is keeping you from trying to do this fix, just give it a shot. The worst that happens is you have a controller that isn't working, which you already had, and you spend a few dollars getting the stuff to attempt the fix. Or you find that it is easier than you thought it would be and you gain a new skill and get a working controller again for a lot less than the price of a new controller.
Charles T.
Comentado en los Estados Unidos el 29 de diciembre de 2024
The xbox controller I gave to my nephews started getting drift on the right stick. They asked if it could be fixed and I knew the only real fix would be to replace the stick. I'm happy that this set came with pretty much everything needed to do the repair minus the iron and soldering skills.When it came in I went to work on swapping out the old sticks for the new ones. Taking out the old sticks is pretty easy, even if you don't have extensive soldering skills. Mine are minimal and I didn't find it to be much of a challenge, all I used was a cheap basic 3M iron and some soldering wick. The board absorbs a lot of heat though, so a solder sucker would probably have worked better, but the wick worked. After taking out the old sticks, I put the new ones in and soldered them in without any issue.I put everything together enough to test and yes they are not perfect. While there's no longer any drift the right stick moves really slowly up, but very fast down. I didn't notice any issue with the other stick. So the problem might be with the stick, but also might be with the controller itself. My nephews are hard on things and I know it got tossed around a lot before it was given back to me.So, while they did fix the drift issue, I can't say with 100% certainty that they are working as they should be. It's not worth pulling back apart and swapping in another stick. They are mostly just playing fortnite and I think it's working good enough for that. If it starts to drift again, then sure, I'll swap it again.And again, if the soldering is keeping you from trying to do this fix, just give it a shot. The worst that happens is you have a controller that isn't working, which you already had, and you spend a few dollars getting the stuff to attempt the fix. Or you find that it is easier than you thought it would be and you gain a new skill and get a working controller again for a lot less than the price of a new controller.
Charles T.
Comentado en los Estados Unidos el 29 de diciembre de 2024
The xbox controller I gave to my nephews started getting drift on the right stick. They asked if it could be fixed and I knew the only real fix would be to replace the stick. I'm happy that this set came with pretty much everything needed to do the repair minus the iron and soldering skills.When it came in I went to work on swapping out the old sticks for the new ones. Taking out the old sticks is pretty easy, even if you don't have extensive soldering skills. Mine are minimal and I didn't find it to be much of a challenge, all I used was a cheap basic 3M iron and some soldering wick. The board absorbs a lot of heat though, so a solder sucker would probably have worked better, but the wick worked. After taking out the old sticks, I put the new ones in and soldered them in without any issue.I put everything together enough to test and yes they are not perfect. While there's no longer any drift the right stick moves really slowly up, but very fast down. I didn't notice any issue with the other stick. So the problem might be with the stick, but also might be with the controller itself. My nephews are hard on things and I know it got tossed around a lot before it was given back to me.So, while they did fix the drift issue, I can't say with 100% certainty that they are working as they should be. It's not worth pulling back apart and swapping in another stick. They are mostly just playing fortnite and I think it's working good enough for that. If it starts to drift again, then sure, I'll swap it again.And again, if the soldering is keeping you from trying to do this fix, just give it a shot. The worst that happens is you have a controller that isn't working, which you already had, and you spend a few dollars getting the stuff to attempt the fix. Or you find that it is easier than you thought it would be and you gain a new skill and get a working controller again for a lot less than the price of a new controller.
JUN
Comentado en Japón el 25 de diciembre de 2024
バラすのにネジが多いので外部用内部用長さが分かるようにしておけば、簡単に交換組み立て出来ました。修理に出すと時間はかかるしお金もかかるので、自分で直せるのが良いですね
JUN
Comentado en Japón el 25 de diciembre de 2024
バラすのにネジが多いので外部用内部用長さが分かるようにしておけば、簡単に交換組み立て出来ました。修理に出すと時間はかかるしお金もかかるので、自分で直せるのが良いですね
JUN
Comentado en Japón el 25 de diciembre de 2024
バラすのにネジが多いので外部用内部用長さが分かるようにしておけば、簡単に交換組み立て出来ました。修理に出すと時間はかかるしお金もかかるので、自分で直せるのが良いですね
JUN
Comentado en Japón el 25 de diciembre de 2024
バラすのにネジが多いので外部用内部用長さが分かるようにしておけば、簡単に交換組み立て出来ました。修理に出すと時間はかかるしお金もかかるので、自分で直せるのが良いですね
JUN
Comentado en Japón el 25 de diciembre de 2024
バラすのにネジが多いので外部用内部用長さが分かるようにしておけば、簡単に交換組み立て出来ました。修理に出すと時間はかかるしお金もかかるので、自分で直せるのが良いですね
JUN
Comentado en Japón el 25 de diciembre de 2024
バラすのにネジが多いので外部用内部用長さが分かるようにしておけば、簡単に交換組み立て出来ました。修理に出すと時間はかかるしお金もかかるので、自分で直せるのが良いですね
JUN
Comentado en Japón el 25 de diciembre de 2024
バラすのにネジが多いので外部用内部用長さが分かるようにしておけば、簡単に交換組み立て出来ました。修理に出すと時間はかかるしお金もかかるので、自分で直せるのが良いですね
JUN
Comentado en Japón el 25 de diciembre de 2024
バラすのにネジが多いので外部用内部用長さが分かるようにしておけば、簡単に交換組み立て出来ました。修理に出すと時間はかかるしお金もかかるので、自分で直せるのが良いですね
Anzen
Comentado en Japón el 22 de diciembre de 2024
この製品はいいですがコントローラーの序盤から交換する時に一般的なハンダゴテでは少し無理がありました個体差があると思いますが
Anzen
Comentado en Japón el 22 de diciembre de 2024
この製品はいいですがコントローラーの序盤から交換する時に一般的なハンダゴテでは少し無理がありました個体差があると思いますが
Anzen
Comentado en Japón el 22 de diciembre de 2024
この製品はいいですがコントローラーの序盤から交換する時に一般的なハンダゴテでは少し無理がありました個体差があると思いますが
Anzen
Comentado en Japón el 22 de diciembre de 2024
この製品はいいですがコントローラーの序盤から交換する時に一般的なハンダゴテでは少し無理がありました個体差があると思いますが
Anzen
Comentado en Japón el 22 de diciembre de 2024
この製品はいいですがコントローラーの序盤から交換する時に一般的なハンダゴテでは少し無理がありました個体差があると思いますが
Anzen
Comentado en Japón el 22 de diciembre de 2024
この製品はいいですがコントローラーの序盤から交換する時に一般的なハンダゴテでは少し無理がありました個体差があると思いますが
Anzen
Comentado en Japón el 22 de diciembre de 2024
この製品はいいですがコントローラーの序盤から交換する時に一般的なハンダゴテでは少し無理がありました個体差があると思いますが
Anzen
Comentado en Japón el 22 de diciembre de 2024
この製品はいいですがコントローラーの序盤から交換する時に一般的なハンダゴテでは少し無理がありました個体差があると思いますが
RMN
Comentado en México el 16 de enero de 2024
Bueno!Y de buena calidad!!
Tania K.
Comentado en México el 24 de agosto de 2023
Tengo busto pequeño, en realidad mi talla es 34 A muy dificil de conseguir en Mexico. Este modelo en talla 34 B me ajusta bien en la copa y espalda, no me queda flojo e incluso me apretó un poco los primeros días pero poco a poco ha sido más cómodo. Estoy satisfecha.
Sabach
Comentado en México el 8 de diciembre de 2023
Era lo que se esperaba.
Monica Leticia García
Comentado en México el 11 de noviembre de 2023
Buen material y cómodo
GEORGINA JULIETA LIMA TIZCAREÑO
Comentado en México el 7 de octubre de 2023
ARTICULO MUY COMODO Y DE BUENA CALIDAD
Albert
Comentado en Canadá el 9 de noviembre de 2022
Great kit with everything you need to replace the thumbstick!I had one XBOX one S controller for few years and it is wore out and can't stay in one place anymore. It was always shift in the game make it impossible to play with this controller. After replace the thumbstick sensor (both), the controller work like new!
Albert
Comentado en Canadá el 9 de noviembre de 2022
Great kit with everything you need to replace the thumbstick!I had one XBOX one S controller for few years and it is wore out and can't stay in one place anymore. It was always shift in the game make it impossible to play with this controller. After replace the thumbstick sensor (both), the controller work like new!
Albert
Comentado en Canadá el 9 de noviembre de 2022
Great kit with everything you need to replace the thumbstick!I had one XBOX one S controller for few years and it is wore out and can't stay in one place anymore. It was always shift in the game make it impossible to play with this controller. After replace the thumbstick sensor (both), the controller work like new!
Albert
Comentado en Canadá el 9 de noviembre de 2022
Great kit with everything you need to replace the thumbstick!I had one XBOX one S controller for few years and it is wore out and can't stay in one place anymore. It was always shift in the game make it impossible to play with this controller. After replace the thumbstick sensor (both), the controller work like new!
Albert
Comentado en Canadá el 9 de noviembre de 2022
Great kit with everything you need to replace the thumbstick!I had one XBOX one S controller for few years and it is wore out and can't stay in one place anymore. It was always shift in the game make it impossible to play with this controller. After replace the thumbstick sensor (both), the controller work like new!
Albert
Comentado en Canadá el 9 de noviembre de 2022
Great kit with everything you need to replace the thumbstick!I had one XBOX one S controller for few years and it is wore out and can't stay in one place anymore. It was always shift in the game make it impossible to play with this controller. After replace the thumbstick sensor (both), the controller work like new!
Albert
Comentado en Canadá el 9 de noviembre de 2022
Great kit with everything you need to replace the thumbstick!I had one XBOX one S controller for few years and it is wore out and can't stay in one place anymore. It was always shift in the game make it impossible to play with this controller. After replace the thumbstick sensor (both), the controller work like new!
Albert
Comentado en Canadá el 9 de noviembre de 2022
Great kit with everything you need to replace the thumbstick!I had one XBOX one S controller for few years and it is wore out and can't stay in one place anymore. It was always shift in the game make it impossible to play with this controller. After replace the thumbstick sensor (both), the controller work like new!
Productos recomendados
Mex $323.77
Mex $ 161 .00 Mex $161.00
Mex $275.64
Mex $ 151 .00 Mex $151.00
Mex $399.99
Mex $ 187 .00 Mex $187.00
Mex $282.34
Mex $ 155 .00 Mex $155.00