No hay artículos en el carro
No hay artículos en el carro El paquete incluye:
4 joysticks analógicos 3D.
4 palillos para pulgar.
4 tapas para pulgares.
1 destornillador.
1 herramienta de palanca.
ダンディズム
Comentado en Japón el 26 de marzo de 2025
2つほどしか使用していませんが、交換後の動作も問題なく良い商品だと思います。正直、交換を自身でできる方は工具など持っていると思うので、部品だけで工具はなしで良いと思います。（その分、部品数を増やすか、価格を安くするかして欲しいです）
Mary C
Comentado en los Estados Unidos el 2 de marzo de 2025
Fixed the stick drift on my controller. Easy to use. Thank you!
ak２２３９
Comentado en Japón el 10 de enero de 2025
自分でできたら安上がり
Andy A.
Comentado en México el 3 de mayo de 2024
No se pudo cargar el contenido.
Shopper20Twenty
Comentado en los Estados Unidos el 24 de diciembre de 2023
With a years worth of use, I began to experience drift in my PS5 DualSense controller, which visibly is the movement of your onscreen character without controller input. For me, without thumbstick input, my character at times would just begin jogging left. Not ideal, and worsened with time.The culprit (for me) was potentiometer (the green 3-prong components on the sides of the joystick modules) malfunction, and this kit will correct the problem. You CAN desolder and replace the entire joystick module with one from this kit, but it’s EASIER to simply replace the disc wheel inside your existing potentiometer. If you insert a small flathead driver into the edge at the top of the potentiometer, you can pop the side tabs loose and gently bend it over to the side. I removed the disc wheel, cleaned the carbon film inside with an alcohol swab, and replaced the disc wheel with one (similarly removed) from this kit. After replacing the disc wheel, simply squeeze the casing back together until the side tabs reseat.Works perfectly, no drift whatsoever!There are plenty of how-to videos available online regarding disassembly of the controller, and this kit also includes the screwdriver and pry tool required to do it.I will give you advanced warning that the controller wiring is about as short as allowable for assembly, and if you pull too much against it, it’s very possible to inadvertently break the wiring at the solder connection. This actually happened to me, and you’d then need to strip the wire and resolder it to the appropriate node. For reference, the controller wiring is 26 gauge, and you’d need a wire stripper small enough (Klein Tools 11046) to accommodate the size.
Al
Got PS5 Orange 3 blink and now the controller is not working, do not buy and search for the correct model that will not brick the controller.
Productos recomendados
Mex $388.05
Mex $ 174 .00 Mex $174.00
Mex $423.41
Mex $ 199 .00 Mex $199.00