Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

PEI Sheet 235 mm x 235 mm y calcomanía magnético con calcomanía, placa de construcción lisa para impresoras Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/3 v2 neo/Ender

Envío gratis en pedidos superiores a Mex $600.00

Mex $475.25

Mex $ 213 .00 Mex $213.00

En stock

1.Color:235 X 235 Mm Pei Gold


Acerca de este artículo

  • 【Excelente adherencia】Fácil de adherirse a la superficie de impresión, fácil de quitar las impresiones, flexiona ligeramente para sacar tu impresión inmediatamente. Se puede lograr una excelente adherencia cuando la temperatura de la cama calentada es de aproximadamente 60 ℃, puedes imprimir directamente en cada lado de la hoja PEI de doble cara sin usar pegamento u otras herramientas para ayudar al modelo a pegarse en la hoja.
  • 【Fácil extracción】Cuando se utiliza en una aplicación de impresión 3D, PEI es excelente porque puede soportar los numerosos ciclos de calor que una cama de impresión 3D pasa de impresión a impresión. Esta superficie se retira fácilmente y es flexible. Las impresiones salen fácilmente de la superficie cuando la temperatura de la cama caliente alcanza la temperatura ambiente. Si la impresión aún está atascada, retira la superficie magnética superior de la parte inferior, dobla la superficie flexible y mira cómo el modelo cae directamente en tus manos.
  • Instalación sencilla: la hoja Ender 3 V2 PEI se combina con 2 partes, una superficie PEI texturizada de plataforma de acero flexible en un lado, simplemente pega la hoja inferior magnética en tu cama calentada, luego coloca la plataforma de acero con superficie PEI en la parte superior. Acero inoxidable de resorte, polvo PEI pulverizado en la superficie, amarillo dorado en la parte posterior. Flexible, extraíble y puede pegarse muy bien a los magnéticos. Alta resistencia y resistencia al calor.
  • Más asequible y práctico: utilizamos un 75% de PEI más grueso y un 25% de acero de resorte más grueso que nuestros principales competidores. Esto significa una placa más duradera que puede soportar las duras condiciones de impresión 24/7. Nuestro imán también puede soportar temperaturas más altas de 120 °C, resistente al desgaste y a los arañazos, fácil de limpiar: hay una película protectora en la superficie del revestimiento compuesto, que es antiarañazos y a prueba de polvo, etc.
  • Amplia aplicación: el tamaño de Ender 3 PEI es de 235 x 235 mm. Después de instalar la cama de impresión, vuelve a nivelarla para mejorar el efecto de impresión. Es aplicable con impresoras 3D Creality como Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 Pro, Ender 3 neo, Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Voxelab Aquila, Voxelab Aquila Aquila C1, impresoras 3D Voxelab Aquila C2 y FDM de tamaño similar. Compatible con PLA/PETG/PEEK/ABS y cualquier otro filamento.



Descripción del producto

Hoja PEI
cama de vidrio ender 3
ender 3 bed

Steve G.
Comentado en Canadá el 11 de marzo de 2025
Works incredibly well
Roger L.
Comentado en Australia el 10 de abril de 2025
Simple and effective all took place how when and where very impressive
N
Comentado en Canadá el 8 de mayo de 2024
I was having problems with my glass bed being too scrubbed and having a silk like surface. I got the pei to do 300deg nylon , but since i have problem with my glass , i use it for pla too and it works super. It grabs very small doghnuts shape on the first layer without having to overheat the bed and removal is a bliss. I knew beforehand the pei only flaw can be scoured by the nozzle so make sure you never touch the bed (why would you go that close anyways without checking first) and this will be the best adhesion surface you will print on ever, its not a glass finish , a bit gritlike but considering the advantage of not having to use glue or ruining prints on the first layer is to me the the best go to bed surface. Ironically it also let you take the prints off without even lifting it off the magnet.Comes with a magnet but i just kept my original on and its as performant. Metal sheet is powerfully attracted to the magnet. No clamps paperclip or glue will ever be required with this perfect product
Kaitlyn
Comentado en Australia el 19 de diciembre de 2024
Very happy with this product.I'm been wrestling my Ender 3 V3 SE to improve bed adhesion and my Z offset, and have been using my printer less and less because it was becoming a pain.But! I didn't need the adhesive magnet, and just used the steel plate. Absolute magic. Without changing any printer settings, my filaments laid down like icing and didn't lift or peel. Almost a perfect first layer. Better, once my print was done, it did actually pop right off. Even when I was simply pulling the plate off the bed. It does leave a much more noticable texture on the bottom layer, but that's fine. Given the much higher likelihood of a successful print, I'm spending more time printing. Will buy again.
Greg Munker
Comentado en los Estados Unidos el 31 de mayo de 2023
So, I recently got myself the PEI Sheet 235mmx235mm and Magnetic Sticker with Adhesive for my Creality Ender 3 printer, and let me tell you, it's been a game-changer! I just can't find a single downside to this awesome sheet.First off, this PEI sheet is amazing. It's like a magic surface that helps my prints stick to the bed perfectly. No more worries about prints detaching or warping halfway through—they stick like glue! The consistency it brings to my prints is seriously impressive, and it's made a noticeable difference in the quality of my 3D prints.I also love that this sheet fits my Creality Ender 3/Ender 3 Pro like a glove. It covers the whole build plate, giving me the maximum print area possible. It fits so snugly that I don't have to stress about misalignments or the edges peeling off. It's like it was made specifically for my printer!Now, let's talk about the magnetic sticker with adhesive. It's a nifty little thing that holds the PEI sheet in place on the bed. The adhesive is strong and reliable, so I don't have to worry about the sheet moving or coming off during printing. Plus, the magnetic properties make it super easy to remove and reattach when I need to clean the bed or do any maintenance. It's hassle-free!I must mention the durability of this PEI sheet and sticker combo. I've been using it for weeks now, printing like crazy, and it's still holding up like a champ. No signs of wear or deterioration whatsoever. It's clear that this sheet is made of high-quality stuff.Maintenance is a breeze too. Cleaning the PEI sheet is as simple as wiping it with isopropyl alcohol or warm soapy water. I don't have to spend a ton of time or effort on it, which means more time for me to focus on creating awesome prints!
Productos recomendados