No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Baja viscosidad y bajo olor
Al igual que otras líneas de resina de Phrozen, TR250LV High Temp está diseñado para brindarle experiencias de impresión y posterior procesamiento más fáciles. Hacemos la fórmula para minimizar el olor tanto como sea posible, por lo que no hace que tu lugar huela.
Alta precisión y baja contracción
Desarrollamos resina TR250LV de alta temperatura para equilibrar la precisión y el encogimiento. Cada modelo 3D que imprime es el mismo que su diseño.
Resiste el calor hasta 80 °C
Lo único de la resina TR250LV de alta temperatura es su capacidad para soportar calor de hasta 120 °C. Por lo tanto, no solo obtienes la misma impresión de alta calidad y velocidad de impresión rápida que normalmente obtienes de resinas estándar, sino que tus impresiones ahora también son adecuadas para probar productos de 80 ~ 100 °C.
Dan the Hitman
Comentado en los Estados Unidos el 15 de octubre de 2023
Very slow printing but well worth the wait. Excellent resolution, strong!!!
Zach
Comentado en los Estados Unidos el 20 de junio de 2022
This is one of the only "high temp" resins that I've been able to use inside of an engine bay. Everything else that I've used besides FormLabs resin (that costs about 10x more) hasn't been able to withstand the heat generated when I was fabricating automotive parts. I would highly recommend this resin
L
Comentado en los Estados Unidos el 7 de mayo de 2022
Less odorous than standard resin of other brandsTougher than standard resin of other brands, I dropped a few prints and surprised they didn't break.Prints just as good as standard resin.The limit of heat resistant is not tested but it is definitely better than standard resin.Great for automotive use prints.
Matthew
Comentado en los Estados Unidos el 17 de diciembre de 2022
This is awesome and Phrozen has yet to let me down. I've used this and their standard 8k resin and they both produce excellent detail and excellent strength characteristics. I have a pretty standard settings arrangement on my mighty 8K and both resins have instantly works regardless of print, I tried another brands resin for the black friday prices at the exact same settings and everything either failed or printed at lower quality and was EXTREMELY brittle. This company is my favorite and I will always recommend them!The ONLY con that I can think of is the clean-up process. This resin does seem to want to stay on the finished prints even after a good alcohol and cure. Just be wary that you will need a good post-clean process to be able to handle/post-edit the prints. STILL EXTREMELY WORTH IT.
Nathan Allan
Comentado en los Estados Unidos el 1 de septiembre de 2021
Unlike many other resins that advertise high HDTs, this one actually holds it shape well when exposed to high temperatures (we tested in a hot car in the sun and in an oven). The color should probably be labeled silver, rather than gray, as it's fairly close to white. I would say that fine details are below average compared to most resins.I used 2.8s/layer on the Uniz IBEE (mono). Be sure to clean and cure the parts quickly, these parts seem more prone to warp than normal.The biggest downside for our purposes is how hard this resin is; it's glass-like in its rigidity so don't expect any flex, bending, threads, snaps, or anything of the sort. It will just fracture or break. To counter this, we mixed 2-parts this resin with 1-part Additive Plus's black Flex resin. Mix well; poor mixing caused a failure in one of our tests. The result has almost perfect qualities for functional parts, a nice balance of hardness and toughness with high temperature features. This mixture took a little longer exposure time that most functional resins we've tested (3.2s/layer on an IBEE - most functional resins take ~2.8s/layer).
Productos recomendados
Mex $548.27
Mex $ 285 .00 Mex $285.00
Mex $1,557.99
Mex $ 778 .00 Mex $778.00