No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Justin Springer
Comentado en Canadá el 5 de febrero de 2025
I purchased one of these after hearing about how good they are for printing.I have a Creality LD-002R.While this appears to have fit well, upon printing I found that nothing ever adhered to the build plates.I tried recommendations of sanding and brushing them for better adhesion, but this failed.Not only this, but the extra lip punctured my FEP and my printer is damaged now.So, essentially this will get a low review, as I am extremely unsatisfied with this product.
Jeff M.
Comentado en los Estados Unidos el 7 de abril de 2025
I had significant adhesion issues with the surface. The description says "brushed finish", but it really was too smooth for prints to properly adhere. I ended up using 150 grit sandpaper to add some texture, and the plate works much better now. Overall the concept was good, just doesn't have the right finish out of the box.
Ron S.
Comentado en los Estados Unidos el 9 de octubre de 2024
I picked this up for my 3D printing as I feel like it can never hurt to have a few different build plates available for different projects.I don't have a Creality system but was able to put it to good use on my end, and this works fairly universally with most printers. The material make was good, and it worked well for my projects that I've printed on it so far, so overall very happy with it.No complaints, as mentioned already, it can work with other systems without much issue, and it's well made and I haven't had much issue with removing my projects from it like I've seen with some other build plates.Overall, would highly recommend, just make sure to double check the dimensions you'd need for your system and print projects and you can't go wrong!
Thorne
Comentado en los Estados Unidos el 30 de octubre de 2024
I have a Creality LD-002R and these fit perfectly. I do recommend doing some prep work on your build plate before you attach the magnetic sticker. I sanded mine on a flat surface using 90 grit sandpaper and wiped it down with alcohol. After applying the magnet, I then clamped it down to a flat surface and left it there for a few days. That last step probably isn’t necessary. But I would recommend it, just because I have had the adhesive fail on a different brand of flex plates. Keep in mind that a large model that is sitting flat on the build plate can cause a lot of force being put on the plate as it lifts from the FEP sheet. That can cause the metal plate to come off or even the adhesive on the magnet to peel off. Angling the model even slightly on the X or Y axis can help avoid this.
Brandon
Comentado en los Estados Unidos el 28 de septiembre de 2024
Easy to install and it comes with an extra plate to remove and start printing again!
Productos recomendados
Mex $386.00
Mex $ 181 .00 Mex $181.00