Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Placa de construcción PEI negra de doble cara para Bambu Lab X1/X1C/X1E/P1P/P1S/A1, PEI liso y textura PEI placa de chapa de acero con resorte flexible de 257 x 257 mm para impresoras 3D

Envío gratis en pedidos superiores a Mex $600.00

Mex $469.84

Mex $ 239 .00 Mex $239.00

En stock

Acerca de este artículo

  • Diseño de PEI de doble cara: combinamos dos tipos de PEI en una placa de acero de resorte para disfrutar de una textura de impresión doble. Experimenta la flexibilidad de las impresiones suaves y texturizadas con nuestra placa de construcción PEI de doble cara, diseñada exclusivamente para impresoras Bambu Lab. En un lado está la granulación traída por PEI texturizado, y en el otro lado está la suavidad aportada por PEI suave.
  • 【Adhesión superior】Utiliza ambos lados de esta innovadora placa PEI para maximizar tu eficiencia de impresión. Cambia entre acabados suaves y texturizados para adaptarse a las necesidades de tu proyecto y lograr una calidad de impresión superior. Ya sea que imprimas con PLA, PETG, ABS, TPU u otros filamentos, esta placa de construcción puede lograr una excelente adherencia. La placa de construcción PEI texturizada negra tiene una buena adherencia, incluso mejor que la placa de construcción PEI dorada. Cuando la placa de construcción y el modelo se enfrían, las impresiones se pueden quitar sin cinta ni pegamento.
  • Resistencia a altas temperaturas: la superficie de impresión PEI lisa puede soportar altas temperaturas de 200 °C. Utiliza la placa de construcción PEI suave ayuda a mejorar la precisión del eje Z durante el proceso de impresión, asegurando la precisión de la vertical. Y da al modelo impreso una textura suave y mate en la parte inferior, mejorando el aspecto general. La superficie de impresión PEI texturizada es resistente a altas temperaturas de 300 °C y puede imprimir varios filamentos. Recomendamos el siguiente filfilfilfilfilfil: /PETG/ABS/TPU/ASA/PVA/nailon, etc.
  • Impresoras compatibles: nuestra placa de construcción PEI de doble cara se adapta a impresoras 3D con un tamaño de plataforma de 257 x 257 mm, compatible con Bambu Lab X1C/X1/X1E/P1P/P1S/A1. Si tu impresora es X1/X1C/X1E, apaga "Habilitar detección de posición de placa de construcción" antes de seleccionar el tipo de placa. Recomendamos estos filamentos y temperaturas para tu placa de construcción de laboratorio de bambú "PLA: 60 ~ 65 ℃; PETG: 70-90 ℃", ABS: 90-100; TPU: 20-40 °C. Si quieres imprimir otros filamentos, ajusta los parámetros.
  • Cómo limpiar y mantener: el polvo y la grasa pueden reducir la adherencia del tablero impreso. Se recomienda limpiar regularmente la superficie con detergente y agua limpia para mantener una adherencia óptima. No utilices acetona para una placa de construcción PEI de doble uso transparente y suave, ya que dañará la superficie PEI.


Sahvaim Placa de construcción PEI negra de doble cara para Bambu Lab X1/X1C/X1E/P1P/P1S/A1, placa flexible de chapa de acero PEI con textura PEI PEI + de 257 x 257 mm para impresoras 3D Bambu Lab.


Oozy
Comentado en los Estados Unidos el 21 de abril de 2025
The plate is honestly good but after using it on my 3rd print on it, the smooth side cracked and now it’s sort of peeling off and chipped a piece leaving it stuck on the bottom of my print. Yes I did let it cool down before attempting to remove the print
robothunter
Comentado en los Estados Unidos el 9 de octubre de 2024
No se pudo cargar el contenido.
Dave W.
Comentado en los Estados Unidos el 8 de octubre de 2024
I appreciated the filament's ability to adhere to the plate and remain in place throughout the printing process.User-friendly design ensures effortless placement and secure attachment of the plate through magnetic adhesion.The current buildplate can withstand temperatures of up to 80 degrees Celsius, and I anticipate that it will be able to handle even higher temperatures in the future.Cleaning the plate is straightforward. I used dish soap and some thorough scrubbing, which was sufficient. There was no need to use any adhesive to secure the print.I found the smooth surface to be easily smudged with fingerprints, which the device's scanner had difficulty recognizing.The rougher side of the PEI sheet performed equally well. I preferred to release the print while it was still warm by simply bending the plate. Once the plate cools down, the print effortlessly detaches.The cost is very reasonable, and having several of them would be advantageous in maintaining continuous printing operations.
Ali
Comentado en los Estados Unidos el 3 de octubre de 2024
Very sleek build plate with no visible markings or branding. Keep in mind your printer may throw an error because of this as bambu automates some settings by the markings. Comes well packaged and protected with protective plastic peel for smooth side, packaging sleeve, hard plastic corner protectors, and a cardboard layer. Was very happy with all that care for a $20 plate.As for the plate itself, it's about half the price of the bambu option. It feels lighter weight than the stock textured PEI plate and that is no doubt where the cost cutting comes from. But you are still getting a great product for the price. The smooth PEI is good for printing something like PA6-CF where you have to use glue not to adhere the print but prevent the part from destroying the plate as you remove it. The smooth surface makes cleaning off residue between prints very easy. Of course it also comes with a textured PEI side which is nice. Definitely recommend.
Bri
Comentado en los Estados Unidos el 18 de octubre de 2024
I have other PEI plates, including the official Bambu Lab PEI plate and they are all significantly thicker in their coating. I scraped off a print from this one and it scratched clear to the metal foundation.This plate still works well and it’s very convenient to have both texture and smooth surfaces to work with. I have had a couple of failed prints on this plate from the smooth side - none from the textured side. This is over the course of about a dozen prints.
Productos recomendados