Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

PTM7950 - Material de cambio de fase, 3.1 x 1.5 x 0.01 pulgadas, 0.25 mm de grosor, 8.5 W/mK, para CPU, GPU, disipador de calor, PS5, cubierta de vapor, SSD (80 x 40 x 0.25 mm)

Envío gratis en pedidos superiores a Mex $600.00

Mex $435.77

Mex $ 235 .00 Mex $235.00

En stock
  • Tamaño: 80 x 40 x 0,25 mm
  • Alta conductividad térmica: con una conductividad térmica de 8,5 W/mK, esta almohadilla transfiere de manera eficiente el calor de componentes como CPU, GPU y SSD al disipador térmico.
  • El material de cambio de fase PTM7950 evita la bombeo, ofrece una alta conductividad térmica, y especialmente extiende la vida útil para aplicaciones de troquel directo en comparación con la pasta térmica.
  • Se envía con pegatinas fáciles de rasgar, por lo que es fácil despegar las películas protectoras de las almohadillas para orejas.


El material de cambio de fase de almohadilla térmica PTM7950 es una solución de interfaz térmica altamente eficiente diseñada para una disipación de calor efectiva en varias aplicaciones. Mide 3.1 x 1.5 x 0.00 pulgadas (0.25 mm de grosor), esta almohadilla térmica cuenta con una impresionante conductividad térmica de 8.5 W/mK, por lo que es ideal para su uso con disipadores de calor, consolas PS5, dispositivos portátiles Steam Deck, CPU, GPU y SSD. Su construcción delgada y flexible permite una integración perfecta en espacios reducidos, asegurando una óptima transferencia de calor entre componentes y disipadores de calor. Con su rendimiento térmico superior, la almohadilla térmica PTM7950 ayuda a mantener temperaturas de funcionamiento estables, prolongando la vida útil de tus dispositivos y evitando problemas de estrangulamiento térmico o sobrecalentamiento.


Wayno
Comentado en los Estados Unidos el 7 de marzo de 2025
Applied to the GPU on my 4090M equipped gaming laptop. Max temps dropped by about 10oC from where they were with the original TIM. Well worth the effort. Dinging it one star because it's a pain to apply without it crumbling. Putting it in the refrigerator, as per the instructions, did help but the material is so thin that it gets back up to room temperature very quickly. The hardest part was pulling off the top plastic layer, which resulting in some tears in the material. Nevertheless I saw the -10oC on the GPU when running the Cyberpunk 2077 benchmark with nVidia recommended settings.
Jason Mc
Comentado en los Estados Unidos el 9 de enero de 2025
This was one of the only listings that mentioned .25mm thickness, Which actual ptm7950 is.Most other listings are at .2 I've used the thinner product, on an Asus laptop to replace the stock liquid metal for the cpu and the compound for the gpu. It worked great, temps were down, fans were less loud.The listed product (.25mm) was applied to an i5 14600k, no oc yet. Cooler is a Corsair link titan 240mm.Idle temps in low 30s, gaming (bo6, indiana jones) mid to high 70s, peaking into the low 80s.Pretty happy with performance. Be aware that it takes more than a few heat cycles/phase changes for the compound to reach peak performance. Don't be worried about high initial temps, this is normal.I had to pull pump power to get the cpu over 80 initially to get a good first melt.Application is fairly easy, measure ihs, cut piece slightly larger, peel one side, apply to ihs, then hate your life for 15min as you try to peel the top side, without removing or breaking the compound on the ihs.I use a hobby knife to get under the cellophane, then tweezers to peel. Good luck.
Productos recomendados