No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Charles
Comentado en los Estados Unidos el 8 de enero de 2025
This fit my Traverse perfectly! Install was super simple and took less than 5 minutes. I put a rooftop cargo carrier on it for a vacation and these rails performed exactly as I expected them to. Very sturdy and I expect to not have any issues with them.
G. Ammons
Comentado en los Estados Unidos el 26 de agosto de 2024
Very easy to install on my 2021 chevy traverse, I took a road trip the day I installed it. I connected a soft cargo carrier loaded it up and it has stayed secure. No added noise, low profile looks like it belongs on my car.
melvin zepeda
Comentado en los Estados Unidos el 24 de julio de 2024
Quedan bien firmes exactas para Chevy traverse 2019 me gustan.
Matt S.
Comentado en los Estados Unidos el 26 de septiembre de 2024
Well made and easy to install. Looks great! No defects or issues found.
Natalie T.
Comentado en los Estados Unidos el 2 de septiembre de 2024
As you older murano owners out there may know, replacing a roof rack cross bar is really expensive. When I saw these I thought I could modify them and make them work. I did. Now my roof rack holds 100 lbs more weight and also sits a fair amount higher so stuff isn't hitting my roof.To complete the modifications, I simply cut about 3/4 of an inch off the end of each crossbar main body. I drilled a hole and added a new rivet nut to each side of the crossbar where I cut off the end of the crossbar. And then I drilled 4 new holes in my Murano's roof rack rails. I used my original hardware to get the new crossbars connected and then tighened the roof rack rails into the roof rack side pieces last to ensure that the width was correct. You can also use the new hardware to screw into your old roof rack holes if you want to make sure that they don't collect rust or debris.Some folks noted that the screws come loose on these so I added purple threadlocker to each screw involved so that nothing comes loose. I would have gone with a blue but couldn't locate mine. I'm sure the purple will hold fine.tools needed for the mod:hacksaw with metal blade2x M5 rivet nuts (ended up using 4 because I was a little too aggressive with them... extras are good)4x M6 rivet nutsrivet nut gunelectric drill with torque controlbits to drill holes large enough for the rivet nutsthreadlockerI would also recommend a t25 bit for your drill. The handheld tool is just a pain and not worth the work until you're at the last turn or so to get it nice and tight.
Productos recomendados
Mex $477.07
Mex $ 248 .00 Mex $248.00
Mex $299.00
Mex $ 137 .00 Mex $137.00
Mex $342.00
Mex $ 181 .00 Mex $181.00