No hay artículos en el carro
No hay artículos en el carro Soporte de techo con ventosa para bicicleta, soporte para techo, soporte para bicicleta, soporte para techo, soporte para bicicleta, de liberación rápida, ajuste de aluminio, horquilla:
Si tu horquilla es de eje delantero QR de 15 mm o 20 mm, necesitas comprar adaptadores de 15 mm o 20 mm para montar en el portabicicletas, tenemos cinco adaptadores de especificaciones:
Adaptador de 9 mm 100, ASIN: B07QRRXKPS
Adaptador de 12 mm 100, ASIN: B07QLLRX4M
Adaptador de 15 mm 110, ASIN: B07D4G8QLG
Adaptador de 20 mm 100, ASIN: B079DPTMPG.
Adaptador de 15 mm 100, ASIN: B079DNV8QV
Marca: Rockbros.
Producto: portaequipajes para coche.
Material: aleación de aluminio.
Peso: 1 bicicleta: 2,1 kg. Tamaño: 16.9 x 5.1 pulgadas.
2 bicicletas: 3.4 kg. Tamaño: 32.4 x 5.1 pulgadas (largo x alto).
3 bicicletas: 4,5 kg. Tamaño: 36.2 x 5.1 pulgadas (largo x alto).
Color: negro.
El paquete incluye: portabicicletas de aleación de aluminio, lechón de rueda trasera, velcro fijo para manivela.
Nota: Puedes encontrar un aceite de silicona normal en tu tienda local para mantener el portabicicletas de succión.
Instalaciones:
Paso 1: limpia el techo del coche y la ventosa para garantizar que no haya agua, arena y polvo.
Paso 2: Instala la ventosa en la azotea
Paso 3: presiona la barra de clinder hasta que no puedas ver la línea blanca (generalmente de 30 a 45 segundos).
Paso 4: Fija la horquilla con liberación rápida en la ventosa delantera.
Paso 5: confirma la posición de la rueda trasera.
Paso 6: Fija la rueda trasera y el pedal
Nota:
1. Si se instala en el coche con un techo corredizo, no abras el horizonte.
2. La velocidad del coche no debe exceder los 120 km/h.
3. Limpia el lugar de instalación antes de la instalación para garantizar que no haya polvo y mantenerlo húmedo.
4. Comprueba si el botón de aspiradora se abulta cada 4 horas cuando lo usas durante mucho tiempo.
C.Rivera
Comentado en los Estados Unidos el 5 de marzo de 2025
I have them for over 2 yrs now. Very good and reliable
D. Brown
Comentado en los Estados Unidos el 28 de agosto de 2024
Just be sure and check it each time you stop. We noticed that when we stopped for gas the suction cups needed to be adjusted. The white part that is supposed to be hidden was visible. We just pressed the buttons again until the white part was hidden again and continued on our way.
C. M. M.
Comentado en los Estados Unidos el 11 de julio de 2024
While the product seems to be fairly beefy and well-made, I was unable to install/test it due to the ridges on my truck roof. Perhaps I missed it, but I don’t remember seeing that being a necessity in the description, hence the lower rating.I was hoping to use this for my truck and 5th wheel, but unfortunately this will not work.
SHOP FOR THE BEST
Comentado en los Estados Unidos el 15 de mayo de 2024
So this product is an excellent idea compared to the traditional super expensive bike racks out. The only thing i noticed is when I got mine and assembled it, the holes for the mount of the forks were not evenly drilled in the main beam. They were good enough to piece together but just raised some concern about the quality of what I was buying as it was my first time. So far all has been well though.
José Sierra Ortiz
Comentado en México el 15 de agosto de 2023
Llegó rápido y el producto es de excelente calidad, lo recomiendo.
Luz Rincon
Comentado en México el 30 de julio de 2023
Excelente calidad, fácil instalaciónSólo le falta una maleta para almacenar
Justin O.
Comentado en los Estados Unidos el 22 de septiembre de 2023
2005 Honda Accord with a modern full suspension 29er all-mountain style MTB.Short drives to the trails thus far without issue. A little nerve racking seeing your bike lean on turns but none of the suction cups have lost force nor has the rear wheel strap felt insecure. I'm worrying less and less the more I use it and the more I figure out the proper flow of installing.The only thing I don't like is that the suction cups leave visible rings on my paint that have not yet come up with general wiping and washing. I don't care too much with my older vehicle but I would be hesitant to put this onto a newer, nicer, more expensive, or specially painted car.*3 Month Update*Left my bike on my car after coming home from the trail for 3 hours and there was noticeable loss of vacuum from all 5 suction cups. The white band was nearly showing in all 5 so it may be best practice to check and re-pressurize every 2 hours or so on longer drives.*1 Year Update*None of the suction cups hold longer than 1-2 minutes despite rigorous cleaning of the pads (which are always covered when not in use), cleaning of the car surface, and following their troubleshooting guide. I cannot go riding anymore at the moment until I figure this out which at this rate will be a new rack system. I had contacted their customer service twice asking for help and advisement but to no avail as they have had no response. I was hopeful to get these back up working again because they had honestly worked well enough for my purposes and trusted them during longer drives, but this current state is now a complete disappointment compounded by the lack of correspondence from their customer support team.If looking for a long term suction cup based bike rack solution, please go elsewhere as I believe spending the $$ on a Sea Sucker system to now be worth it.
Productos recomendados
Mex $1,805.55
Mex $ 722 .00 Mex $722.00
Mex $1,738.90
Mex $ 834 .00 Mex $834.00