No hay artículos en el carro
No hay artículos en el carroMás información del producto
Construido para durar
La lijadora de disco W1828 de 12 pulgadas ha sido especialmente diseñada para proporcionar muchos años de servicio sin problemas. La atención al detalle, las piezas robustas y un programa de control de calidad rígido aseguran un funcionamiento seguro y confiable.
- Garantía de 2 años
Shop Fox W1828 Lijadora de disco
12 pulgadas
Esta lijadora de disco de 12 pulgadas de estilo de producción es ideal para dar forma y suavizar bordes, cuadrar cortes finales y trazar ingletos simples y compuestos. La mesa de hierro fundido a tierra de precisión se ajusta para lijado biselado de hasta 45 grados y el motor de accionamiento directo refrigerado por ventilador de 1 HP gira a 1.700 RPM, lo que es ideal para aplicaciones de lijado de madera. Utiliza discos de lija adhesivos sensibles a la presión de 30,5 cm.
- Motor: 1 HP, 110 voltios, monofásico, 10 amperios, 1725 RPM
Medidor de inglete
Esta lijadora incluye un gálibo de inglete de lujo para mover piezas de trabajo en el disco de lijado en un ángulo específico. Para utilizar el medidor de inglete, simplemente deslice en la ranura de inglete, afloje el pomo de bloqueo, ajuste el ángulo y vuelva a apretar el perilla.
Escala de grados
La escala de grados fácil de leer te permite conocer tu ángulo exacto de lijado para mayor precisión y precisión.
Características:
- Disco: Aluminio fundido de 30,48 cm
- Construcción de rodamiento de bolas
- Pintura con recubrimiento en polvo
- Interruptor de seguridad con llave de desactivación
- 5 cm de diámetro exterior. Puerto de polvo
- Mesa de hierro fundido de precisión
Interruptor de seguridad
El W1828 cuenta con un interruptor de remo de seguridad que proporciona un mayor grado de seguridad sobre otros tipos de interruptores de encendido y apagado debido a su pala de gran tamaño y llave de bloqueo extraíble. No más volteando para encontrar el botón "Desactivado". Simplemente bofetar la pala hacia abajo para apagar la energía.
Especificaciones:
- Motor: 1 HP, 110 voltios, monofásico, 10 amperios, 1725 RPM
- Tamaño de la mes 15-3/4 de ancho x 4-1/2 pulgadas de profundidad
- Inclinación de mesa de 0 a 45 grados
- Estampado: 33 cm de ancho x 10 pulgadas de profundidad
- Altura total: 14-1/2 pulgadas
- Peso aproximado del envío: 28 kg
User
Comentado en los Estados Unidos el 7 de agosto de 2022
I was looking for a quality sander with a small footprint for truing up tube steel since my chop saw leaves it less than square. I received this today and put it to work. Super quick setup- just a couple of quick-adjust handles to screw into the miter slot holes for holding the table, and (4) rubber feet to screw in place. Maybe 3 minutes? I was stunned when I first turned it on- SOOOO quiet and SOOO smooth. No wobble, shimmy- rock solid and NICE.Yes the miter table and sliding miter need to be set with an accurate square- you can’t go by the pointer and markings. But that’s not an issue for me. I may buy a second sliding miter fence so I can have one set at 90 and one at 45….not sure if they are available. Also there is a tiny bit of slop in the miter groove, but again, it’s not a dealbreaker for me. My steel miters welded up beautifully and true after I got things set up correctly.My (cast iron) table did droop at one point but I think I just didn’t set the hand screws tightly enough. If this ends up being an issue I’ll come back and edit.All I can say is your search is over- add to cart NOW. I got this at $299 and then I noticed the price jumped. Hopefully it’s temporary and you too can get it at under $300 (which is what the Depot was selling it for as well when I was shopping). It’s a great tool.
Maria L. Gaines
Comentado en los Estados Unidos el 12 de agosto de 2022
This came well packaged with no damage and although it's just a little bit tricky to adjust the table it's really not a big deal it's nice and quiet and very powerful and was surprised how well the dust selection works. This has been a great addition to my shop for a affordable price.
Robert Mitchell
Comentado en los Estados Unidos el 11 de noviembre de 2022
This is the second one I purchased. Hopefully, I will have better luck this time. So far, so good. Time will tell.The first one arrived with a defective motor. Worked fine for the first few days. After that - when turned on, it would just vibrate the disc. Spinning the disc by hand would get it going. Could do that in either direction. Not a keeper!!! Returned.Outside of the motor issue, it seems to be a pretty nice grinder. Nicely boxed and finished. The metal table was the deciding factor in purchasing it.
stanley
Comentado en los Estados Unidos el 12 de mayo de 2021
This sander was one of my best purchases in a while. It’s well built and has a heavy base so it doesn’t walk while in use. I use it often and lts quiet. Was easy to assemble out of the box. Great piece of equipment.
HandyDaddy
Comentado en los Estados Unidos el 13 de septiembre de 2017
Got this on a great Amazon special. The performance is excellent and runs super quiet. I have a Shop Fox Oscillating Spindle Sander that is really noisy, but not this. It actually has a low soothing sound that calms as you sand. The HP is plenty strong and the sanding surface is enough for most projects. It is a little pricier than some of the other disc sanders, but well worth it and if you can get in on a deal, even better!
Productos recomendados
Mex $9,984.17
Mex $ 1,881 .00 Mex $1,881.00
Mex $5,421.65
Mex $ 1,881 .00 Mex $1,881.00
Mex $1,739.61
Mex $ 748 .00 Mex $748.00
Mex $568.00
Mex $ 261 .00 Mex $261.00