No hay artículos en el carro
No hay artículos en el carro Nombre del producto: Soporte para radiadores de CPU
Material: Plástico
Color del producto: Negro + Amarillo
Peso del producto: 19 g.
Tamaño del producto: 97 x 97 mm.
Productos incluidos: Soporte para radiadores de CPU 1PCS
Características:
Compatibilidad multiinterfaz: adecuado para Intel LGA 775, 1150, 1155, 1156, 1200, 1366, 1700 y otras interfaces, una amplia gama de aplicaciones.
Ajuste flexible: se puede ajustar de forma flexible según la situación de la placa base para garantizar una instalación estable en diferentes versiones de la placa base.
Estable y resistente: excelente material, estructura estable, radiador de soporte estable a largo plazo, garantiza el funcionamiento de la computadora.
Consejos: Este producto se mide manualmente, el tamaño puede ser ligeramente diferente. Además, debido a las diferencias en la visualización, el color real del artículo puede ser ligeramente diferente al de la visualización.
Average Consumer
Comentado en los Estados Unidos el 21 de enero de 2025
So, I tried an off brand AIO cooler and the backplate stripped out when attempting to remove it. The manufacturer never responded to my inquiry about getting a replacement, so I had this 360mm AIO just sitting there, useless. This inexpensive backplate solved my problem. It should be compatible with many AIO and air coolers, but YMMV.
Michael Minnis
Comentado en los Estados Unidos el 19 de enero de 2025
This is a well made product but will not work on an Asus ROG STRIX B760-I GAMING WIFI LGA 1700 ITX motherboard as it will pinch the components on the bottom of the motherboard. I am not sure if I blame the manufacturer of the support or more rather Asus for a poor PCB layout. There is no way to mount this without crushing a couple micro resistors, at least on an ITX sized board. Support comes with a bag of screws and a small driver but there are no mounting holes on the actual support to use them. I see marks in the casting so maybe your supposed to drill them out if you need them. 4 stars for the price and durability
RFM
Comentado en los Estados Unidos el 24 de diciembre de 2024
I'm not sure why the seller mentions "radiators" in this listing, but this is the necessary piece that must go on the back of the motherboard to attach an Air Cooler or Water Pump that will hold them on over the Processor to do cooling. The radiator is only connected to either the air cooler or the water pump by hoses. Anyway, these are made with plastic, and in our shop where we build custom computers, we have found the manufacturers supplied ones tend to break very easily, or at best don't enable you to fully tighten the cooling structure down over the processor. Having a stock of these has saved us untold hours of wasted time when a manufacturer's unit malfunctions, and we replace it with one of these. This is one of those inexpensive components that is necessary, and without one when you need it just stops your task of building.
Productos recomendados
Mex $269.00
Mex $ 145 .00 Mex $145.00
Mex $1,205.57
Mex $ 518 .00 Mex $518.00
Mex $5,499.99
Mex $ 1,881 .00 Mex $1,881.00