No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Thermalright es una marca Taiwán con más de 20 años de desarrollo. Tiene cierta popularidad en los mercados nacionales y extranjeros y tiene una influencia decisiva en el mercado de jugadores. Las líneas de productos de I+D incluyen: Radiador refrigerado por aire de la CPU, ventilador de enfriamiento del chasis, almohadilla de silicona conductora térmica, grasa de silicona conductora térmica, driver de ventilador de la CPU, soporte de montaje anticaída, soporte de montaje y otros productos.
LGA1700-BCF BLACK V2
La corrección de flexión de la CPU Thermalright es totalmente compatible con la CPU Intel12 Generation LGA1700, el chipset es la serie H610, B660, Z690. La CPU del computadora es propensa a sobrecalentamiento y deformación. El marco fijo de la CPU está diseñado para evitar que la CPU se deforme o se doble en favor de la fijación de la CPU Este marco fijo de CPU es bueno para corregir el grado de flexión de la CPU y proteger bien la cubierta de la CPU.
- 1 marco de contacto de CPU LGA1700
- 1 destornillador en forma de L
Antideformación: La CPU del computadora es propensa a sobrecalentamiento y deformación. El marco fijo de la CPU está diseñado para evitar que la CPU se deforme o se doble en favor de la fijación de la CPU
Material duradero: La hebilla fija de CPU está hecha de proceso de chorro de arena anodizado dorado totalmente de aluminio, y el borde está oxidado, lo que no es fácil de rayar.
Instalación fácil: El corrector de flexión de la CPU le proporciona la pieza de montaje que necesita. Puedes fijarlo en la placa base de LGA1700 con tornillos simples.
twolilsnails
Comentado en los Estados Unidos el 2 de abril de 2025
Why spend $20-30 on a contact frame when this one can be had for almost half the price. Installation was quick and easy, utilizing the original mounting bracket screws, insuring compatibility with your motherboard! Will continue to purchase ThermalRight contact frames for all my intel builds!
Phil
Comentado en el Reino Unido el 20 de julio de 2024
To test this the only thing that changed was this mountI tested temps using a game called the first decendant to benchmarkBefore the mount was added I'd get peak temps of 87c during preparing shaders and peak temps of normal gameplay for an hour was 84cAfter the mount was installed my peak in preparing shaders was 76 and peak during normal gameplay for an hour was 65I've also noticed 5-15c lower changed in my gpu tempInstall is very easy and instructions are clear and simple I used it on a 14700k so would definitely recommend to anyone wondering if it's worth it for 14th gen
Tech Guy Beau
Comentado en Canadá el 8 de mayo de 2024
Fits perfectly, high quality materials, improves connection between cooler and CPU
John Boy
Comentado en el Reino Unido el 6 de noviembre de 2024
I've just built a computer based on an ASUS ROG STRIX Z790-H Gaming Wi-Fi motherboard, i7-14700K CPU with a Noctua NH-D15 CPU air cooler. ROG Support advised that an LGA 1700 CPU frame would be a good idea for this set up. I've reviewed the frame with photos, including temperatures running at XMP 1 overclocking profile.The first photo shows the motherboard and the standard CPU frame with the protective cap removed. Four screws hold the standard frame. These need to be carefully removed with the screwdriver that comes with the new frame; both are shown in the second photo. It's best to release the standard frame lever before removing the screws, as the arm is spring-loaded against the motherboard. The second photo shows the top of the new frame; note the small triangle on the bottom left corner of the frame that must line up with the small triangle on the bottom left of the CPU. The third photo is the underside of the new frame showing the recesses for the CPU. Carefully place the CPU in the underside of the new frame. Fit the new frame holding the CPU on the motherboard, and fix it with the four screws that you removed earlier, tightening each a small amount and working in a circle. It should now look like the fourth photo. I put a 2 mm dot of Noctua thermal paste towards each corner of the CPU, with a 4 mm blob in the centre, then ran the system for several hours without overclocking to ease in the system and thermal paste.The fifth photo shows the UEFI BIOS screen with XMP profile 1 applied. The CPU temperature is 39 degrees, DDR5 is 7200 MHz, the CPU is at 5900MHz, the motherboard is at 28 degrees (ambient 23 C).The i7-14700K CPU has a reputation for being difficult to cool, but this set up works comfortably. I have posted reviews on Amazon for the other components.
Brad
Comentado en los Estados Unidos el 10 de noviembre de 2024
A friend pointed this to me when I purchased the i9-12900k in Oct 2023. I was having issues where the CPU was reaching high temps and pegging out close to 100 C and thermal throttling. I did not know that the ILM (CPU bracing bracket) on the newer chipsets tends to warp and cause the cooler not to sit properly on the CPU and keep it cooled. Once my order arrived I removed the factory ILM bracket and replaced it with this device. My water cooler now sits perfectly upon the CPU and hasn't caused any issues with cooling on my device. Max temps I have seen are around 80 C max depending on what I am working on. Even running programs such as Aida64 and stressing the CPU temps have dropped from the 100 C range down to 85 C range. This has definitely saved me from causing damage to my CPU due to heating issues. It is simple to install by simply removing the original bracket off the motherboard and utilizing the 4 screws from the original device and placing the CPU in place with thermal paste and simply mounting the bracket over the top of it and screwing it down and installing the cooler.My wife upgraded her PC in June and went with a 12th gen i5 LGA 1700. I didn't even bother trying to install the CPU until I ordered this device and had it in hand. I didn't want to have to remove and reinstall everything like I did on mine so I waited and installed this device to be safe from the start.
Productos recomendados
Mex $3,720.00
Mex $ 1,599 .00 Mex $1,599.00
Mex $11,210.99
Mex $ 1,881 .00 Mex $1,881.00
Mex $950.00
Mex $ 522 .00 Mex $522.00
Mex $310.20
Mex $ 145 .00 Mex $145.00