No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Adhesivo para bañera con tapón deslizante
Sobre SlipStopper
Diseñamos accesorios de baño y cocina para facilitar y mejorar la vida de los clientes. Diseñamos productos innovadores según las necesidades del cliente. Ofrecemos productos de baño y cocina de primera calidad al cliente. No solo ayudamos a los clientes a tener una vida más fácil, sino también a divertirse en la vida.
SlipStopper - Tiras de ducha antideslizantes
Mantén a tu familia segura con pegatinas antideslizantes para bañera
Las pegatinas para bañera con tapón antideslizante son 18 piezas de 20,3 x 4,1 cm
Tiras largas y transparentes. Estas bandas adhesivas de seguridad se pueden utilizar
en bañeras, duchas, jacuzzis, barcos, escaleras y más.
- Perfecto para todas las superficies resbaladizas.
- Tiras antideslizantes resistentes y duraderas.
- Material de alta calidad.
- Fácil de instalar, limpiar y quitar.
- Piel súper suave para personas mayores o niños.
- Crea tu propia forma de diseño con estas tiras.
Paso 1: Asegúrate de que la superficie en la que vas a colocar estas pegatinas esté limpia y seca.
Paso 2: Retira el papel en la parte posterior de la pegatina para exponer el pegamento. Coloca el adhesivo en la superficie con la superficie pegada hacia abajo.
Paso 3: Para un palo perfecto y antideslizante, asegúrese de utilizar el raspador (proporcionado) para gastar el aire.
Paso 4: Te recomendamos que esperes unas 24 horas para asegurarte de que las tiras se peguen lo suficientemente firmemente.
Paso 1: Utiliza el aplicador raspador para meterlo debajo y rascarlo. Paso 2: Simplemente limpia la superficie con cualquier limpiador. Como el pegamento especial utilizado para estas pegatinas se puede quitar fácilmente sin dejar residuos.
Estas pegatinas antideslizantes para bañera están diseñadas solo para todas las superficies lisas.
No colocar sobre grietas, lechada o superficies sucias.
Asegúrate de que la superficie de aplicación no haya productos químicos.
Meagain
Comentado en los Estados Unidos el 1 de febrero de 2025
I wished there were a few more to this kit but it worked out. For my standard basic tub I used 5 across twice in the middle area (two rows of 5) and 4 on each end. They run lengthwise to the drain.I was going to do them perpendicular but worried about any small amount of water pooling up & not draining. That's for the over-thinkers out there :)
burrko
Comentado en los Estados Unidos el 15 de enero de 2025
These strips were easy to install and are almost invisible on the shower floor. The strips provide the additional friction we were looking for for our 93-year-old mother. Now we will see how well they hold up.
Brad W Rieder
Comentado en los Estados Unidos el 11 de noviembre de 2024
I used a little vinegar and warm water to scrub the bottom of the tub prior to laying down the strips. Also made sure it was perfectly dry before moving onI purchased The clear strips so the picture doesn’t show up all that wellI followed the 24 hour wait period To get wet. I was tired of bathmats. There were stained continuously by the hard water where I live.So far it’s been a month and had no issues work very well. Feel safe standing up in the tub, but I do always hang onto a bar - age
LauraROC
Comentado en los Estados Unidos el 28 de mayo de 2022
As others have said, these are essentially invisible once installed. They really do exactly what they need to do and the process is completely easy. I would caution one one thing though — they are rough. This is not like a squishy suction mat feel on your skin. And that doesn’t bother me at all when showering. But taking a bath? It’s extremely uncomfortable on your butt and legs. I ended up taking a couple out of the tub and using fewer, otherwise bathing would be too uncomfortable.
Carolyn A Landry
Comentado en los Estados Unidos el 30 de septiembre de 2022
Even though the floor of my shower has a slight texture, it is very slippery so I had to be very careful! The message for these strips was that they needed a smooth surface, but I thought I would try them anyway. If they did not work it would only be my fault.I first scrubbed the shower floor with Comet and a scrub brush and rinsed it very well. I then wiped it with rubbing alcohol. I put the strips where I wanted them before I took off the backing. I placed them about 2 inches apart to be sure there would not be a chance of slipping. Then I took off the backing of each strip (one at a time) and put it in position using the included tool.So far they work great! They are adhering, are easy on the feet, are invisible and I don't slip! I ordered only one set because part of my shower space is taken by a shower seat so the strips are not needed there. If you have a large shower you might want to purchase 2 sets to make sure the floor is well covered.
Productos recomendados
Mex $299.54
Mex $ 152 .00 Mex $152.00
Mex $259.99
Mex $ 137 .00 Mex $137.00
Mex $300.59
Mex $ 156 .00 Mex $156.00