No hay artículos en el carro
No hay artículos en el carrophillip spears
Comentado en los Estados Unidos el 9 de marzo de 2025
Easy install
Alejandro Pandal
Comentado en México el 19 de febrero de 2024
Muy utiles para su aplicación, las llaves son genericas, se abren relativamente facil;Considerar que si buscan este objeto para usarlos "juntos" no cuenta con el elemento de union de pestillo a pestillo, y se tiene que colocar, comprar, o realizar artesanalmente .
Logan Graham
Comentado en Canadá el 24 de junio de 2023
Bent easily and the latch itself broke off from the handle within 40 days of install. Wouldn’t recommend and will never buy again.
Allan Iwaskow
Comentado en Canadá el 22 de abril de 2023
Excellent fit. Exactly what I wanted.
Darwin m.
Comentado en México el 19 de septiembre de 2022
Muy buen producto
Jomantra
Comentado en los Estados Unidos el 6 de noviembre de 2021
I purchased these Toolbox RV Handle Latch Stainless Steel Tool Box Latch Paddle Locks for my Kobalt (Lowes) toolbox. The original latches became loose and would not lock reliably upon closing the lid of the toolbox. I discovered that the original latches did not have seals behind them either, but these do! These fit perfectly in the old latch cutouts and were easy to install. I had to drill out the pop rivets in the old locks, remove the connecting rod from the rod connectors and the entire lock comes out easily. Put the new locks in with provided seals and pop rivet the 4 corners of each lock into place (you probably could use a small bolt/lock washer/nut, but pop rivets are so much easier!) The only problem was, the old locks' rod connectors on each lock could not be removed easily or reused. These new latches do not come with rod connectors, but they do have the holes in them to accept the rod connectors. So, if your old latch locks have rod connectors (allows you to open both locks simultaneously by pulling on one lock handle) that are not designed for removal, you will want to order a "UWS Rod Connector" for each lock prior to installing. The UWS Rod Connectors I ordered fit these paddle latches perfectly. Each paddle lock is keyed the same. Very pleased with the new paddle locks as they are a big improvement over the originals. Easy to install but does take some time in carefully drilling out the old pop rivets (don't enlarge the pop rivet hole by using to big of a drill bit) and inserting the new lock and rivets. Don't forget to order the Rod Connectors separately (about $12-$15 each). Pleased....with the exception of no rod connectors being included!
Productos recomendados