Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

UCTRONICS para Raspberry Pi 4 PoE HAT con ventilador de enfriamiento, mini placa de expansión de energía a través de Ethernet para Raspberry Pi 4 B, 3 B+ y montaje en rack

Envío gratis en pedidos superiores a Mex $600.00

Mex $616.18

Mex $ 308 .00 Mex $308.00

En stock

Acerca de este artículo

  • Este sombrero PoE se puede utilizar con frambuesa pi 3 modelo B+ y frambuesa pi 4 modelo B (tableros de aspberry Pi no están incluidos).
  • Potencia de salida: DC 5V (2.5A máx.); Presupuesto de potencia total: 12.5W; Cumple con IEEE 802.3af
  • Tamaño más pequeño: ahorra más espacio, sin complicaciones de montar con la Raspberry Pi y montar en el rackmount.
  • Ventiladores de refrigeración efectivos: los ventiladores de refrigeración sin escobillas de 25 mm x 25 mm hacen que tu dispositivo siga funcionando a la temperatura adecuada.
  • NOTA: El conmutador de red o el equipo de fuente de alimentación (PSE) es necesario para suministrar la señal PoE, y deben cumplir con el estándar IEEE 802.3af o 802.3at PoE, particularmente la sección 33.4.1 con respecto al aislamiento eléctrico PSE de los cables. Para el interruptor no aislado, como algunos interruptores Ubiquiti no pueden proporcionar un aislamiento adecuado, solo pueden funcionar con cable de red CAT 5E y CAT 6E.



Descripción del producto

Sombrero de Raspberry Pi Poe
PI 4 PoE sombrero
Mini y ligero

John Michael
Comentado en los Estados Unidos el 2 de marzo de 2025
##UPDATE:The product by design has the pins for the 4 pin connector towards the top vs the bottom. So to get it to work correctly it needs to be push down firm to sit against the pi. This is fine if you dont use a case or any risers that could interfere with this. Im updating my review to 5 stars. Because the seller was quick to respond and sent a new unit. Though the design in the product may be the issue here, the seller is great.###################################################################This PoE hat gets the job done, but it’s not without issues. The biggest problem I encountered was with the 4-pin connector, which had a loose connection out of the box. I had to carefully bend the pins to establish a proper connection—something that shouldn’t be necessary on a new product.That said, once connected, the fan works well. Unlike some other reports, I found it to be quiet and effective at keeping temperatures in check. It’s also low-profile, making it a great choice for compact setups.Overall, this PoE hat is functional but has quality control issues. If you’re comfortable making minor adjustments, it’s a decent option. However, for a plug-and-play experience, you might want to look elsewhere. 3/5 stars.
Joshua Lee
Comentado en los Estados Unidos el 31 de mayo de 2023
Fan died after a solid year and a half of uptime, and yes it did make some horrible sounds for a while.
Grant Chapman
Comentado en Australia el 6 de marzo de 2022
Fitting this was fairly trouble free, and I paired it with the Uctronics 1RU rack mount for the Pi. Unfortunately after about 3 weeks the fan started to get really noisy. I have it running in an open rack in my walkin robe, and the noise if great enough to now need to close the door to sleep at night. I will be swapping for a Pi original POE hat, and maybe try replacing the fan and try it again on my next Pi project. Shame.
Shawn Maguire
Comentado en los Estados Unidos el 15 de septiembre de 2021
Fan no longer functions after 90 days of continuous use. Bummmer...
Jeffrey J. Miller
Comentado en los Estados Unidos el 25 de abril de 2021
This is a really low profile POE Hat or the RPi 4B. It is very quiet and fans spins up/down based on load. Entirely appropriate for a Pi that is in a rack mount orientation.
Productos recomendados

Mex $2,210.40

Mex $ 1,038 .00 Mex $1,038.00

5.0
Elegir