Easy to install though the installation is with screw on clips only. The screws are short, but if you have thin bottoms on your cabinets they will poke through like they did for me. I just cut them off with a vibe saw. Some may not like that option.

I really like these lights. The are made with extruded aluminum body, clean and compact. Accurate measurements are necessary during installation to align these precision segments that plug together. What a clean look, and bright. I installed them in our laundry room and the color of light is proper to see the clothing true color. The package includes extension jumper wires to extend light segments into locations of uneven elevations etc...and mounting hardware. An elegant solution.

These were great and easy to install.Light quality is great and exactly what we wantedPretty durable and low profile.As with any product like this, of course the cords I never what we need them to be but maybe you’ll have better luck.Some longer spacing wire might’ve been nice but overall these are great value and you will like them

Esto funciona exactamente como se indica; un buen producto.

Buena relación calidad-precio

No se por hay gente que dice que no le funcionan, quizas la instalan mal o las dejan prendidas todo el tiempo. De momento todo funciona muy bien con este kit de luces, tuvimos que hacer una adaptación para extender uno de los cables ya que no daba la vuelta. Pero quedo perfecto. Lo recomiendo y estaré comprando de nuevo pronto.

Me gusta que las tiras sean independientes y pueda o instalarse conectadas todas en una sola linea recta o interconectarse con los cables suministrados que permiten adaptarse a formas diversas.Las utilicé para el techo de un clóset y quedaron muy bien.Habría preferido luz blanca y no cálida como en las fotos, pero la verdad se ven muy bien.

Después de 6 meses de uso una de las secciones dejo de funcionar.

Me funcionan muy bien, sólo que pensé que eran luz blanca y son calida

en general son muy buenas, solo que son muy brillantes, tuve que comprar un controlador para regular su brillo

I love these lights! I was looking for something to brighten up my office and these are easy to install and low profile. I mounted them on top of my doors, facing up so they provide indirect light. They are very bright and would make fine under-cabinet lights. The image does not do them justice. I think this is because they are very bright so they make the rest of the image look a bit shadowy (it's not!). The kit comes with a number of cables to allow you to connect segments together, or you can simply plug segments into one another. The nice thing about the cables is that they allow you to easily turn corners.Overall, this is a well-thought-out lighting application.That being said, there are some downsides:1. Since each segment is separated by a connector, there is a slight gap that you can see in the image at the bottom of the lights (these are plugged directly into one another). The only way to avoid this is to place the lights further away from the wall. Unfortunately, in my case, this is not possible, so I've learned to live with it. In an under-cabinet or under-bed situation, this would probably not be noticeable.2. The lights are not dimmable.3. The light segments themselves are not sold separately4. You are restricted to 6 light segments with the enclosed transformerJust a note on that last item -- each segment is 3.2 watts, so that's 19.2 in total for 6 of them. You can see from image 2, the back of the transformer that it's sized to exactly 19.2 Watts. While the segments are not sold separately, you can buy another kit and runt he string further, but IF YOU PLUG MORE THAN 6 SEGMENTS INTO THIS TRANSFORMER, IT IS A FIRE HAZARD. You'll notice the transformer getting very, very hot. It can get hot enough to melt the plastic case and start a fire.The solution to running more segments is to get a larger 24V transformer and do some wiring - the connectors are non-standard so there's some DIY involved here. I bought two sets for my application and then bought a 50W dimmable transformer to allow me to tone down the lights if I want to.Overall, this is a unique and flexible product, that's a lot easier to use than the competition owing to it's compact, yet extensible nature.I have several recommendations for improvement:1. Upsize the transformer in the standard 6-segment kit to 24 W to allow for current fluctuations and to let it run cooler.2. Provide more standard connections to the transformer (not really a big deal since most LED transformers allow for bare-wire connection and if you're replacing it, you'll simply have to cut the wire)3. Sell the light segments separately4. Provide a number of lengths of wire and connectors ranging from 1" to 3" instead of a bunch of 6-inchers for more flexibility (and since the connectors are non-standard)If you want to find a larger capacity transformer, search for "LED DRIVER TRANSFORMER 24V". Make sure it's 24V and the wattage (W) is high enough. Multiply the number of segments by 3.2 and this number should be about 80% of the wattage of the transformer. For instance, 10 segments require 32W, but you should look for 40W or higher transformer to provide a little padding and keep the transformer running cooler.

Incluye herrajes para montar las luces led, de buena calidad, aunque seria bueno que incluyera cables de extensión de distintos tamaños para poder colocar mejor los leds

These lights were pretty easy to install, and they look great. I feel safer getting a name brand, and the price was still very reasonable. I installed one set direct-connected, and one set with the connecting wires, and both went fine.In the small box are the individual strips (one has a plastic cap on the end so you know it's the last in the chain), 2 mounting brackets with 1 screw each for each strip, a power block with 2 mounting screws, a power cable for the wall to the brick, a set of 18" cables that can optionally be used to connect the strips if you don't want a solid line of directly connected strips, and instruction sheets in English and Spanish.The instructions are reasonably clear, though I did read them twice. However, they reference a drilling template that did not exist; I just spaced the mounting brackets a couple of inches in from the end of each strip. If you don't screw the brackets completely tight, they can twist to align with the strip. The 1/16" drill bit recommendation was spot on for the included #4 screws, and the screws were plenty short to not worry about going all the way through my cabinet bottoms. However, there are no extra screws included, and I sheared the head off one that was going into a wood knot. I have a good stash of screws, but didn't have any of those tiny flat-head #4s, so I ended up nailing that one bracket in. 1 or 2 extra screws would be a good addition to the kit. Another good addition to the kit would be a few cable clips to secure the loose wire lengths up out of the way. I happened to have a couple suitable for the main power cord, but I just used some duct tape to secure the small connector wires to the underside of the cabinets...we'll see how well that stays.