No hay artículos en el carro
No hay artículos en el carroAddict
Comentado en los Estados Unidos el 18 de febrero de 2025
Easy to program and at a much, much lower cost than buying at a dealer. Super easy to program keys
Howard Tunley
Comentado en los Estados Unidos el 12 de febrero de 2025
Thought it was an electrical fault with the car. Changed the remote, reprogrammed and no more problems. Easy step by step guide
أبو سلمان
Comentado en Arabia Saudita el 6 de enero de 2025
المفاتيح ممتاز بس لا يوجد به شريحة سيارة ترافيس 2015 لا تدعمه
Familia Romero Ramos
Comentado en México el 18 de agosto de 2024
Cumple, muy funcional, práctico.
ossix66
Comentado en México el 30 de mayo de 2024
Le dejo las 5 estrellas por el servicio. La herramienta se ve bien, está bien hecha. Pero habrá que ver su resistencia al momento de utilizarla, solo hay que se concientes de que no se le puede exigir mucho. Las navajas no vienen tan afiladas, lo único que me preocupa es el seguro que tiene para el mecanismo de las pinzas, no se ve tan robusto, sospecho se puede aflojar. Pero no se sabrá hasta meterle trabajo. Pero para una aspiracione está bien.
Cristian Oregel Garcia
Comentado en México el 15 de octubre de 2024
Es una multiherramienta muy útil! De muy buena calidad!
Yasser
Comentado en Arabia Saudita el 4 de febrero de 2023
جربته على سييرا ٢٠١١ ممتاز بس يحتاج برمجة
Conza
Comentado en México el 2 de noviembre de 2023
Muy útil la mini herramienta. Es mejor que una multi navaja.Por supuesto, no es para reparaciones mayores. Es para emergencias.
Francisco Javier Garza Olono
Comentado en México el 19 de mayo de 2021
funciono perfectamente con mi silverado 1500 4.8 2013
Arturo B
Comentado en México el 25 de septiembre de 2020
Gran producto a precio muy bajo
Les E.
Comentado en los Estados Unidos el 11 de septiembre de 2019
Five Stars because as for my 2008 Silverado 2500 HD both the fob and the key are self programmable without having to purchase any special tool. The process for programming the fob is in the owners manual. However, the process for programming the key is not. The manual states you must go to the dealer for the programming. WRONG!! The programming for the keys is as follows:Place a working key into the ignition and turn to the ON position (without starting) for 10 - 15 seconds.Turn off and WITHIN 10 SECONDS place the key to be programmed into the ignition and turn to the ON position. Leave the key in place for 90 seconds. After 90 seconds turn the key to the OFF position and then using that key try to start the truck.Mine worked without a hitch using this process. In fact, I had two keys to program and it seems the second key, which I held in my lap while programming the first key, by virtue of its proximity to the ignition was programmed at the same time as the first one without having to repeat the process. And unlike the key fob, programming a new key doesn't affect any of the other keys.With the key fob, once you relearn any key fob you must relearn ALL of the key fobs, even the OEM fobs (this is in the owners manual).
Productos recomendados