No hay artículos en el carro
No hay artículos en el carroTorno de metal de velocidad variable de 550 W de 7 x 14 pulgadas con engranajes de nailon. El mini torno de banco de precisión de 7 x 14 pulgadas cuenta con un portabrocas de 3 mandíbulas, un husillo cónico MT3, un cono de cola MT2, un soporte de herramientas y un motor de 3/4 HP, diseñado para realizar varios tipos de giro de metal, fácil de operar. A través del proceso de enfriamiento de alta frecuencia y la molienda de precisión de la cama de hierro fundido de alta calidad. 0-2250Rpm velocidad del eje subnivel de dos ejes eje cambio de velocidad, continuamente ajustable. Una lámpara móvil es libre para ti. Construcción de aluminio resistente velocidades infinitamente variables de precisión de 3 mandíbulas Portabrocas de apoyo profesional Contenido del paquete: 1 mini torno de metal, algunos accesorios relacionados, 1 manual Especificaciones Potencia del motor: 550 W CC velocidad del husillo: 0-2250 RPM oscilante sobre la cama: 180 mm Diámetro del portabrocas: 100 mm Centros de 238 cm. Distancia: 350 mm (13.78") Diámetro del husillo: 21 mm (0.82") Cónico del husillo: Mt3 Tailstock Taper: Mt2 Cross Slide Travel: 65 mm (2.53") Recorrido superior deslizante: 35 mm (1.36") Precisión del eje: 0.01 mm Material del engranaje Material: plástico Nylon Fuente de alimentación: Eléctrico. Control: Manual Tipo de máquina: Material tratado: Pulgadas de metal Rosca: 12-52 T.P.I; rosca métrica: 0.5-2.5 mm
Clint Essaunce
Comentado en Canadá el 7 de agosto de 2024
The size is great ,quality suspect as far as guarding and shields hitting the lathe chuck bent and jammed into place, all screw holes were not aligned with lathe bed holes,a fail
Customer
Comentado en Canadá el 31 de marzo de 2024
It has worked quite well for me using Brass and aluminum - I have popped the fuse 2 x milling/drilling carbon steel - so you do need to back off appropriately on harder material . The 4 way tool post does rotate but the upper carriage does not - it is fixed at 90 degrees to the lower deck. ( even thought there is a graduated scale shown in the picture, suggesting the upper table can be rotated).I recommend that you don't buy 1/2 " cutters as they are to large unless you buy a quick change tool post holder set as well ( so you can adjust cutter height) - my 1/2" indexable cutters sit to high above the centre of a work piece. Buy 3/8 or 1/4 and shim them.I find that basic HSS cutters work best on harder steels as the more expensive indexable carbon steel cutters require more speed and power that this unit has. The pre cut HSS cutters you can get on amazon are also cheaper. - I have now been grinding my own cutters using HSS bar and it works well.I had to spend some time aligning EVERYTHING so you should check that as well. - I can now mill accurate to within about 0.001 inch over about 3 inches and produce the 0.015" wall thickness needed for my Brass cartridge cases.following up on the required FA5A fuses that are needed ( the unit does come with 2) - No one within a 100 miles of my place had them - had to order them on amazon - keep that in mind
Steven Malanka
Comentado en Canadá el 31 de diciembre de 2024
I received the lathe as advertised, and the delivery was prompt with no damage. I look forward to making the recommended upgrades to this unit, as many other users have done, to enhance the performance of the lathe. Overall, I am happy with the purchase."
Max
Comentado en Canadá el 9 de diciembre de 2023
Motor is weak and all the gears have small debris.
R M Wild
Comentado en Canadá el 27 de diciembre de 2023
Good size works OK will be able to make stuff with it.
Productos recomendados
Mex $260.00
Mex $ 135 .00 Mex $135.00
Mex $4,151.32
Mex $ 1,785 .00 Mex $1,785.00