No hay artículos en el carro
No hay artículos en el carroDescripción del producto
User
Comentado en los Estados Unidos el 18 de marzo de 2025
Feels like a quality light. Arms tension can be tightened from the inside. Finish looks nice, no defects. Wires tucked inside had pretty frayed ends, may need to cut them off to ensure a secure and safe connection. There is plenty of excess so not a huge deal. Getting one of the light housings threaded on was a bit difficult to start, I think there was a burr or something. Once it got started it went on just fine though. The way the bulbs alternate color temperature seems pretty annoying to me, but I'll give it a chance once it's up there.Will update with pics once I get it installed.
E. Fisher
Comentado en los Estados Unidos el 16 de marzo de 2025
This is a vine review meaning the product was provided to be reviewed.This product is a brushed chrome metal six LED track light fixture with one fixed center arm and two pivoting end arms. Six LED bulbs are included, as is a mounting plate, hardware, and an instruction sheet. The product is packaged in a brown cardboard box.I ordered this product because my wife wants to add framed photographs to the upper wall of our mudroom and a track light will highlight the pictures while also providing general room illumination.The product is fully assembled except for the bulbs and metal lampshades. The bulbs have a bayonet mount and the lampshades screw into the fixture. Installation was straightforward using an existing ceiling box and the included mounting plate. I had no issues installing the product. The one deviation I made from the printed instructions was I installed the bulbs and the lampshades with the fixture on my carpet before installing it in the ceiling and it was a good move. See attached photo of the installed product in my mudroom.I gave this product five stars because the finish on the product is very good, the product comes mostly assembled and installation is easy, and last but not least, the inclusion of LED lamps saved me a trip to Home Depot. On the negative side, each lampshade has a polymer label with bulb maximum wattage that detracts from the appearance of the fixture. Removing a label leaves a sticky residue on the metal lampshade. I did not deduct any stars for this because it is likely a safety requirement. See attached detailed photograph of lampshade with label. All six lampshades have this label.In summary, this product has a nice finish, appears to be well manufactured, is adjustable, and straightforward to install. I’m glad I ordered it.
lh
Comentado en los Estados Unidos el 3 de abril de 2025
Pretty happy with the build quality on this light fixture. It is stainless steel and though heavy it's not extremely so. I was able to install it by myself, however it was a little challenging to hold it up at the point where I had to secure it.I love that the bulbs were included with the light. They are warm white at the moment and I'm pretty happy with them. I know that others reported some issues with the bulbs they received, however this hasn't been the case for me. Mine do not flicker or change color at all. At least not yet.They definitely upgraded the look of my kitchen. I had a standard three bulb fixture that was probably circa 1994 that I was replacing. Though it could aim in different directions. It's nothing like this! This light allows me to spotlight exactly where I want without blinding me overall how the other ones used to. You can move the arms and each light can point in either direction and move up and down. I think that makes this a pretty good value because you can really customize the lighting to highlight the areas of your kitchen that you want to draw attention to.Honestly, the wiring was the easiest part for me. I shut off the breaker before beginning. The light I was placing had the same wiring set up so no worries there. There was a copper ground wire, a neutral and a live which are all labeled and color-coded Black is live. White is neutral. The wires coming from them are silver in color, unlike the copperhouse wiring. Instructions include a QR code because the drawing on the instruction sheet is a little small and hard to read.I do have some advice regarding the installation. There are two bolts that are meant to hold the light onto the bracket that you mount to the junction box where your house wiring comes in. Adjust the screws to fit the light so that it won't wiggle once you put the fixture on. This is because the fixture itself has pretty short end cap screws so if the bracket screws protrude too much downwards the whole light fixture will be loose even though it is technically secured by the endcaps. I made the mistake of screwing in the two mounting screws all the way into the bracket thinking that that was required but when I put the bracket onto the junction box they stuck down way too much. So I would recommend holding the bracket up to the junction box where you're going to screw it in first to check the fit before tightening everything. Other than that, the bracket they included wasn't the same one as what I was replacing, but there's enough flexibility in the way it's designed to where you can get it to fit in a lot of different installations.Then I flipped the breaker and it instantly turned on with no issues.It created a much softer light yet does a good job of spotlighting the areas that I wanted. It's definitely better than the fixture I replaced which had plastic components to it. This one appears to be all metal so I think it is good for the price.
Gamma Unicorn
Comentado en los Estados Unidos el 13 de abril de 2025
Pay attention to the direction of the lights, they only have a 270 degree turn. The bulbs are very dim and I will be replacing them immediately, that's why it got 4 stars instead of 5, because this style bulb isn't cheap
Pat M
Comentado en los Estados Unidos el 1 de abril de 2025
I needed a light for a bathroom, where the old fixture was a 4 light set up and was mounted on the ceiling, above the mirror I opted for the 4 light set in Nickel. I ordered it up and it arrived in a few days. The light was packed very well, with the bulbs in separate boxes, the shades in bubble wrap, and the light in a plastic bag, and all packed in styrofoam. I am a DIYer so I am pretty handy around the house and can handle the basics with electrical work, like replacement of lights. As there was an existing light already installed, after a quick review of the instructions, I unscrewed the old light, undid the wires, hooked up the new wires, then mounted the new light to the junction box. I then put in each of the bulbs and then the lampshades. From start to finish, I was probably done within 20 minutes, which included wiring, taping off the wire nuts, and installing the bulbs.I would say this is a very good product and easy to install, with very detailed instructions and should be easy for most to install by themselves. For safety reasons, I taped off the light switch so the family didn’t accidentally flip it on while they were chatting with me during the install. There were some extra parts in the kit, but I think these could have been for mounting to the ceiling/wall. Overall, I am very impressed with the lights as it appears they are made well and should hold up for a long time. I like that they also include LED bulbs which should save on electrical costs and should last for a long time.The price of the lights was very fair and about what you would find for a light of this style. They also look very nice, and the Nickel finish appears to look like a higher priced item. As these were installed in a bathroom, I will be sure to update the post in the future if they don’t hold up with the moisture / steam from a bathroom. Would certainly recommend this option.
Productos recomendados
Mex $201.98
Mex $ 117 .00 Mex $117.00
Mex $230.00
Mex $ 126 .00 Mex $126.00
Mex $451.55
Mex $ 239 .00 Mex $239.00
Mex $884.84
Mex $ 424 .00 Mex $424.00
Mex $3,264.00
Mex $ 1,468 .00 Mex $1,468.00