No hay artículos en el carro
No hay artículos en el carroCustomer
Comentado en Canadá el 9 de enero de 2025
Excellent...pour une performance optimale il faut enlever complètement la colle et tout résidu. Ensuite nettoyer la jante interne avec de l'alcool pur à 99.9%. Ensuite appliquez le fond de jante WBT , maintenir et tirer fortement tout en appuyant sur celui-ci lors de la pose avec votre pouce afin qu'il épouse parfaitement la jante interne ceci éliminera aussi les bulles d'air . Procédez par petite section. IMPORTANT : Assurez vous lors de la pose qu'il ne dépasse sur les côtés de la jante interne. NOTE: La largeur du fond de jante WBT doit correspondre à la largeur interne de la jante et il doit pas remonter sur les côtés interne de la jante.
Cesar T.
Comentado en Canadá el 26 de enero de 2025
No se adhiere
Chuck W
Comentado en los Estados Unidos el 28 de julio de 2023
I used this on my Roval Controle E5 rim and it's a perfect fit and works beautifully.
M forbes
Comentado en Canadá el 29 de septiembre de 2023
This tape worked as good as any tubeless tape, making it a great buy, just clean the rim with isopropyl alcohol and boom.I will order this again.
Michael Ballew
Comentado en los Estados Unidos el 9 de mayo de 2022
I seen many many reviews that state that this tape by WTB doesn't stick. I just finish installing this tape on two rims and had no problems whatsoever with it sticking. However, I know what I'm doing and I've setup many rims to run tubeless prior to this install. If you want the tape to stick and seal properly: 1st, after removing tires and tubes and the old rim tape clean your rims. Clean them twice. I just isopropyl alcohol with a clean rag or paper towel. I also clean the the outside or the rims and my hands with the alcohol as well, because any contamination will cause the tape not to stick. 2nd, don't expect to just install the new valve stems and reinstall your tires and expect it to work and seal. Reinstall the tubes and the tires and inflate them to the recommended pressure and let sit overnight. This will seat/adhere the tubeless tape completely to the rims. After these steps then remove the tubes from one side of the tire, install the new valve stems, add sealant and reinstall the tire on the one side you removed and fill with air. If you do this your tubeless setup will work every time.
Enrique Barajas Martinez
Comentado en México el 25 de noviembre de 2022
Se usa para sellar llantas tubeless
Jose Portales
Comentado en México el 20 de septiembre de 2021
Muy poco adhesivo, la cinta se corre y es muy dificil colocarla.
David DesRoches
Comentado en México el 15 de septiembre de 2020
Esta cinta es horrible. Falta pegamento. Casi imposible aplicarla.
Luis Pintado
Comentado en México el 26 de agosto de 2019
Excelente cinta, funciona a la perfección, con una llanta continental no tuve que usar bomba talonadora
Productos recomendados