No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Al igual que muchas otras personas, es posible que te hayas cansado del pico de plástico o viejo para dispensar tu agua, limonada, kombucha o té solar. La espiga de repuesto para dispensador de acero inoxidable X-chef está diseñada para resolver estos problemas para tus tarros de vidrio, jarras de agua o recipientes.
Asegúrate de que tu familia y amigos disfruten cada gota en ceremonias, bodas o eventos
1. Aspecto clásico, sin fugas
Hecho de acero inoxidable 304 de alta calidad con nuestro diseño de sellado único, la espiga de repuesto X-chef es un complemento duradero para tu dispensador de bebidas.
2. Fácil de usar
Cuando diseñamos la espiga de dispensador de bebidas X-chef, tenemos en cuenta el funcionamiento suave y la instalación rápida. Puedes abrir la válvula todo el camino para dispensar rápidamente o a mitad de camino para dispensar lentamente.
Especificaciones:
- Tamaño estándar, compatible con la mayoría de dispensadores de bebidas americanas.
- Material de alta calidad: Acero inoxidable 304
- Paso de rosca: 1,25 mm
- Diámetro: 17 mm
- Peso neto: 0.1 kg cada uno
Guía de instalación paso a paso:
Lavar a mano todos antes de su primer uso.
Camino 1
Como se muestra en la imagen de arriba.
Camino 2
1. Coloca uno de los parachoques de goma en el exterior del orificio del dispensador de bebidas y otro en el interior.
2. Coloque una de las arandelas de metal contra la espiga, luego coloque la espiga semejante a través del agujero del dispensador de bebidas, haga que sea apretado.
3. Ahora coloque la otra arandela metálica en la espiga desde el interior del dispensador.
4. Último es poner la tuerca en la espiga, apretar y poner un poco de agua en el dispensador de la fuga.
Contenido del paquete: Los accesorios están juntos en una bolsa de plástico: 2 espigas, 4 arandelas de metal, 4 topes de goma y 2 tuercas.
Mary - Jackson
Comentado en los Estados Unidos el 8 de abril de 2025
Great spigots for a glass water container. The 3 containers that I purchased had plastic spigots which I didn't want to use. These are stainless steel, dispense water and other liquids seamlessly. Great purchase.
rosej58
Comentado en Australia el 19 de abril de 2024
These taps are really good, do the job amazingly well. Go on easy and no dipping or leaking.The old one the seal had been ripped by a fault in the glass at the tap, so before installing the new one I used very fine sand paper to smooth it, worked really well, and so the tap will last longer than if I had just put it straight on.
Pammy
Comentado en Canadá el 14 de junio de 2021
Perfect!!! Ordered to replace the cheap plastic spigot that came with my dispensers (which I use in my laundry room for detergent and fabric softener).Shipping took awhile but worth the wait.No instructions, but a quick YouTube search solved that problem.Excellent quality and decent price.Very satisfied and highly recommend.
Julian
Comentado en Australia el 18 de febrero de 2021
I bought these spigots to replace the original old and leaking plastic spigots on two Mortier Pilon kombucha jars. Believe it or not, Mortier Pilon does not supply replacement spigots as a spare part!! Go figger! Anyway, these are much better quality than the originals, are easier to use (you don’t have to press against a spring to keep them open), have a better flow rate and don’t ever clog up with kombucha sediment. VERY highly recommended!
dre
Comentado en los Estados Unidos el 29 de septiembre de 2021
Needed water dispenser to replace good but dated 45+ year old ceramic water dispenser. Mom seen the Anchor Hocking Heritage Hill Dispenser and that was it.Spout is inches from the countertop and requires stand, unless you set on edge which usually ends in knock off accident.Paired with X-cosrack Wood Plant Stand, and X-Chef stainless steel spigot, replacement for plastic spout.__________________________________Anchor Hocking Heritage Hill DispenserItem model number 93339L14 $29.998.84lbs 8.75 x 8.75 x 13.5 inchesX-cosrack Wood Plant Stand $15.99Stand Exactly As Advertised.Wanted sleek but minimalistic looking stand for water container.Easy to install, with included Allen wrench, not Phillips head, thank goodness. Phillips would never sink screw into bamboo wood without stripping head.Lite weight, but very strong, rated at 175lb capacity, and with an 8.84lb dispenser and ~2.5 gallon capacity at 8.34lbs per gallon x 2.5 = 20.85 + 8.84 = 29.69 lbs of glass and water.Visit the X-Chef Store $16.99X-Chef 2 PCS Stainless Steel Replacement Spigot for Glass Jar & Drink Dispenser.I believe the X-Chef quality is second to none, of the $15 to $20 spigots, and that is 2 for less than average price of one. Installed 2nd on ancient Ceramic dispenser, looks really good and old plastic spigot is gone from it as well.Total $62.97, but remember that is 2 spigots.Tried to write this to help a novice or person looking for good quality products at a descent price, that to me, look really good together. Check out photos.
Productos recomendados
Mex $749.00
Mex $ 404 .00 Mex $404.00
Mex $1,999.00
Mex $ 819 .00 Mex $819.00
Mex $2,596.26
Mex $ 1,194 .00 Mex $1,194.00
Mex $279.00
Mex $ 167 .00 Mex $167.00