Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Yeehemes - Dispensador de agua potable de 1/3 y 5 galones, 1 GPM, 110 V, sistema de bomba de agua embotellada, para RV, cocina

Envío gratis en pedidos superiores a Mex $600.00

Mex $1,506.43

Mex $ 708 .00 Mex $708.00

En stock

Acerca de este artículo

  • Dispensador de agua embotellada: Voltaje: 115 voltios CA. Ciclo: 60 Hz. Para modelos de CA; corriente: 115 voltios, 0,5 amperios. Capacidad de flujo máximo: 1 galón por minuto; cable de alimentación: 3.5 pies
  • 【Parámetro】--Caudal máximo: 1.0 GPM; presión máxima: 40 PSI; presión de funcionamiento: 30 PSI; salidas de manguera: 20 pies 1/4 pulgadas; manguera de succión: 48 pulgadas L; manguera de descarga: 20 pulgadas
  • Protección térmica: la protección térmica evita el sobrecalentamiento, protegiendo la bomba y la caja de control de daños. Compacto para un fácil montaje Apagado automático cuando la botella está vacía
  • Goma amortiguadora: los puertos de desconexión rápida permiten un reemplazo fácil en segundos. Funcionamiento silencioso equipado con patas de goma que amortiguan el ruido para minimizar la contaminación acústica
  • Aplicaciones: el sistema entregará el agua bajo presión a un llave de agua potable individual, la entrada de agua de un refrigerador para la máquina de hielo y el llave de agua potable refrigerado, y a ciertos cafeteras comerciales y té



Descripción del producto

compacto

BW1000A A+ 2
Satisface tus diferentes necesidades

Bomba con interruptor de encendido/apagado iluminado, proporciona una visibilidad clara en lugares oscuros o difíciles de alcanzar.

Equipado con patas de goma que amortiguan el ruido para minimizar la contaminación acústica que llega a un buen funcionamiento.

  • Ciclo: 50/60 Hz. para modelos AC
  • Salidas de manguera: Salidas de manguera de 20 pies y 1/4 pulgadas: 20 pies 1/4 pulgadas
  • Manguera de descarga: 20 pulgadas
  • Manguera de succión: 48 pulgadas de largo
  • Cable de alimentación: 3.5 pies
  • Varita: 22.2 pulgadas de largo
  • Peso neto: 8 libras.

Sistema dispensador de agua embotellada Yeehemes de 20 pies nuevo estilo

Perfecto para botellas de 3 a 6 galones

Este sistema de dispensación de agua está diseñado para mayor comodidad y portabilidad. Cuando la unidad está enchufada a una fuente de alimentación de CA y una botella de agua está conectada al sistema, hay agua dulce disponible y cómoda de usar.

  • Gran caudal de 1 GPM
  • Bomba de agua de 40 PSI
  • Fácil de instalar
  • Diseño fácil de usar
  • Seguridad de usar
  • Estructura compacta y ligera
  • Bomba de agua de alta resistencia
  • Pies amortiguadores de ruido

bomba de jarra de agua

Gran caudal

El dispensador de agua Yeehemes puede bombear hasta un galón de agua al máximo, lo que puede llenar rápida y fácilmente cualquier cosa que necesites.

bomba de agua rv

Fácil de instalar

El puerto de conexión rápida hace que sea la forma más fácil de conectar esto a tu kit de filtración o máquina espresso.

sistema de bomba dispensador de agua de botella

Amplia aplicación:

Se puede utilizar ampliamente en agua de refrigerador, máquinas de café para máquina de hielo, dispensadores de agua, fregaderos, etc.


canavaro
Comentado en México el 21 de marzo de 2025
tal cual está en la imagen cumple con lo que dice lo que no me gusta es la correa, pero de ahí en fuera muy bien
carlos
Comentado en España el 26 de febrero de 2025
Tengo el dron junto con la cubierta de protección del mando de FPV y encaja perfectamente en la funda. Muy contento
mom of many
Comentado en los Estados Unidos el 18 de febrero de 2025
Works great. Makes it easy to keep my kids drinking water.
mom of many
Comentado en los Estados Unidos el 18 de febrero de 2025
Works great. Makes it easy to keep my kids drinking water.
mom of many
Comentado en los Estados Unidos el 18 de febrero de 2025
Works great. Makes it easy to keep my kids drinking water.
mom of many
Comentado en los Estados Unidos el 18 de febrero de 2025
Works great. Makes it easy to keep my kids drinking water.
mom of many
Comentado en los Estados Unidos el 18 de febrero de 2025
Works great. Makes it easy to keep my kids drinking water.
mom of many
Comentado en los Estados Unidos el 18 de febrero de 2025
Works great. Makes it easy to keep my kids drinking water.
mom of many
Comentado en los Estados Unidos el 18 de febrero de 2025
Works great. Makes it easy to keep my kids drinking water.
mom of many
Comentado en los Estados Unidos el 18 de febrero de 2025
Works great. Makes it easy to keep my kids drinking water.
noble michel
Comentado en Francia el 6 de enero de 2025
Exelent produits
Gimer M.
Comentado en México el 10 de enero de 2025
Todo bien
Muy malo
Comentado en México el 24 de agosto de 2024
Excelente el producto, el tema es que no me dieron la factura correspondiente.
CYBER BEAR
Comentado en los Estados Unidos el 22 de julio de 2024
This has to be one of the best-performing products I have tested as a reviewer for the Amazon Vine testing program! However, it does not have the adapters to attach it to a "plumbed-in" commercial Espresso machine. I own a La Spaziale Dream commercial espresso machine. It requires A 20 amp circuit and can draw espresso shots while steaming milk. I mention this because it can simultaneously draw water for both boilers in the machine. I connected the two differently sized water supply hoses by inserting the 1/4" O.D. tubing into the PEX tubing with the 1/4" I.D.I used several layers of 4:1 glue-lined shrink tubing with adhesive inside, which I bought on Amazon. It worked like a charm. You can see in the pictures that I used very little of the 1/4" tubing; the espresso machine's stainless steel-wrapped hose could have reached the pump but would have required more disassembly and reassembly and more parts, so I chose the procedure I described. The black is multiple layers of shrink-wrap pieces of varying diameters. Shrink tubing is typically used for electrical connections; however, the glue-lined shrink wrap often works excellently for plumbing.I plan to use the previous pump to provide the pressure to run a reverse osmosis water filter and softener instead of a gravity Zero Water filter. The Zero Water filter removes chlorine and heavy metals and softens the water. My espresso machine requires soft, low-mineral-content water in the provided water. I will continue to use my setup and fill the 5-gallon bottle from the little kitchen sink faucet that goes where the sprayer typically does in an under-sink, plumbed-in filter.This little pump works just as well for my purposes as the much more costly setup with a higher capacity it is replacing. This pump is a little louder but cannot be heard over the espresso machine. The pump is quite heavy, well-designed, and well-built; it should last long.You must prime the pump before it is connected to something to evacuate the air. It has a push-in John Dory or Shark Bite style connector, and they could hardly be easier to use. I put a push-fit cutoff valve in the PEX line and primed the pump until water came out before connecting it; then, I pushed the PEX in and turned the valve to open, drawing a cup of boiling water, which caused the machine to let water in. Priming was very simple; all attached now, it works perfectly. The instructions say to put the pump near the bottom of the water container. I suggest following that so it can draw the water more efficiently. It is not made to be placed above the water source.I am thoroughly satisfied with all aspects of this product, including the quality, price point, instructions, and packaging; I have no reservations about highly recommending this product.
CYBER BEAR
Comentado en los Estados Unidos el 22 de julio de 2024
This has to be one of the best-performing products I have tested as a reviewer for the Amazon Vine testing program! However, it does not have the adapters to attach it to a "plumbed-in" commercial Espresso machine. I own a La Spaziale Dream commercial espresso machine. It requires A 20 amp circuit and can draw espresso shots while steaming milk. I mention this because it can simultaneously draw water for both boilers in the machine. I connected the two differently sized water supply hoses by inserting the 1/4" O.D. tubing into the PEX tubing with the 1/4" I.D.I used several layers of 4:1 glue-lined shrink tubing with adhesive inside, which I bought on Amazon. It worked like a charm. You can see in the pictures that I used very little of the 1/4" tubing; the espresso machine's stainless steel-wrapped hose could have reached the pump but would have required more disassembly and reassembly and more parts, so I chose the procedure I described. The black is multiple layers of shrink-wrap pieces of varying diameters. Shrink tubing is typically used for electrical connections; however, the glue-lined shrink wrap often works excellently for plumbing.I plan to use the previous pump to provide the pressure to run a reverse osmosis water filter and softener instead of a gravity Zero Water filter. The Zero Water filter removes chlorine and heavy metals and softens the water. My espresso machine requires soft, low-mineral-content water in the provided water. I will continue to use my setup and fill the 5-gallon bottle from the little kitchen sink faucet that goes where the sprayer typically does in an under-sink, plumbed-in filter.This little pump works just as well for my purposes as the much more costly setup with a higher capacity it is replacing. This pump is a little louder but cannot be heard over the espresso machine. The pump is quite heavy, well-designed, and well-built; it should last long.You must prime the pump before it is connected to something to evacuate the air. It has a push-in John Dory or Shark Bite style connector, and they could hardly be easier to use. I put a push-fit cutoff valve in the PEX line and primed the pump until water came out before connecting it; then, I pushed the PEX in and turned the valve to open, drawing a cup of boiling water, which caused the machine to let water in. Priming was very simple; all attached now, it works perfectly. The instructions say to put the pump near the bottom of the water container. I suggest following that so it can draw the water more efficiently. It is not made to be placed above the water source.I am thoroughly satisfied with all aspects of this product, including the quality, price point, instructions, and packaging; I have no reservations about highly recommending this product.
CYBER BEAR
Comentado en los Estados Unidos el 22 de julio de 2024
This has to be one of the best-performing products I have tested as a reviewer for the Amazon Vine testing program! However, it does not have the adapters to attach it to a "plumbed-in" commercial Espresso machine. I own a La Spaziale Dream commercial espresso machine. It requires A 20 amp circuit and can draw espresso shots while steaming milk. I mention this because it can simultaneously draw water for both boilers in the machine. I connected the two differently sized water supply hoses by inserting the 1/4" O.D. tubing into the PEX tubing with the 1/4" I.D.I used several layers of 4:1 glue-lined shrink tubing with adhesive inside, which I bought on Amazon. It worked like a charm. You can see in the pictures that I used very little of the 1/4" tubing; the espresso machine's stainless steel-wrapped hose could have reached the pump but would have required more disassembly and reassembly and more parts, so I chose the procedure I described. The black is multiple layers of shrink-wrap pieces of varying diameters. Shrink tubing is typically used for electrical connections; however, the glue-lined shrink wrap often works excellently for plumbing.I plan to use the previous pump to provide the pressure to run a reverse osmosis water filter and softener instead of a gravity Zero Water filter. The Zero Water filter removes chlorine and heavy metals and softens the water. My espresso machine requires soft, low-mineral-content water in the provided water. I will continue to use my setup and fill the 5-gallon bottle from the little kitchen sink faucet that goes where the sprayer typically does in an under-sink, plumbed-in filter.This little pump works just as well for my purposes as the much more costly setup with a higher capacity it is replacing. This pump is a little louder but cannot be heard over the espresso machine. The pump is quite heavy, well-designed, and well-built; it should last long.You must prime the pump before it is connected to something to evacuate the air. It has a push-in John Dory or Shark Bite style connector, and they could hardly be easier to use. I put a push-fit cutoff valve in the PEX line and primed the pump until water came out before connecting it; then, I pushed the PEX in and turned the valve to open, drawing a cup of boiling water, which caused the machine to let water in. Priming was very simple; all attached now, it works perfectly. The instructions say to put the pump near the bottom of the water container. I suggest following that so it can draw the water more efficiently. It is not made to be placed above the water source.I am thoroughly satisfied with all aspects of this product, including the quality, price point, instructions, and packaging; I have no reservations about highly recommending this product.
CYBER BEAR
Comentado en los Estados Unidos el 22 de julio de 2024
This has to be one of the best-performing products I have tested as a reviewer for the Amazon Vine testing program! However, it does not have the adapters to attach it to a "plumbed-in" commercial Espresso machine. I own a La Spaziale Dream commercial espresso machine. It requires A 20 amp circuit and can draw espresso shots while steaming milk. I mention this because it can simultaneously draw water for both boilers in the machine. I connected the two differently sized water supply hoses by inserting the 1/4" O.D. tubing into the PEX tubing with the 1/4" I.D.I used several layers of 4:1 glue-lined shrink tubing with adhesive inside, which I bought on Amazon. It worked like a charm. You can see in the pictures that I used very little of the 1/4" tubing; the espresso machine's stainless steel-wrapped hose could have reached the pump but would have required more disassembly and reassembly and more parts, so I chose the procedure I described. The black is multiple layers of shrink-wrap pieces of varying diameters. Shrink tubing is typically used for electrical connections; however, the glue-lined shrink wrap often works excellently for plumbing.I plan to use the previous pump to provide the pressure to run a reverse osmosis water filter and softener instead of a gravity Zero Water filter. The Zero Water filter removes chlorine and heavy metals and softens the water. My espresso machine requires soft, low-mineral-content water in the provided water. I will continue to use my setup and fill the 5-gallon bottle from the little kitchen sink faucet that goes where the sprayer typically does in an under-sink, plumbed-in filter.This little pump works just as well for my purposes as the much more costly setup with a higher capacity it is replacing. This pump is a little louder but cannot be heard over the espresso machine. The pump is quite heavy, well-designed, and well-built; it should last long.You must prime the pump before it is connected to something to evacuate the air. It has a push-in John Dory or Shark Bite style connector, and they could hardly be easier to use. I put a push-fit cutoff valve in the PEX line and primed the pump until water came out before connecting it; then, I pushed the PEX in and turned the valve to open, drawing a cup of boiling water, which caused the machine to let water in. Priming was very simple; all attached now, it works perfectly. The instructions say to put the pump near the bottom of the water container. I suggest following that so it can draw the water more efficiently. It is not made to be placed above the water source.I am thoroughly satisfied with all aspects of this product, including the quality, price point, instructions, and packaging; I have no reservations about highly recommending this product.
CYBER BEAR
Comentado en los Estados Unidos el 22 de julio de 2024
This has to be one of the best-performing products I have tested as a reviewer for the Amazon Vine testing program! However, it does not have the adapters to attach it to a "plumbed-in" commercial Espresso machine. I own a La Spaziale Dream commercial espresso machine. It requires A 20 amp circuit and can draw espresso shots while steaming milk. I mention this because it can simultaneously draw water for both boilers in the machine. I connected the two differently sized water supply hoses by inserting the 1/4" O.D. tubing into the PEX tubing with the 1/4" I.D.I used several layers of 4:1 glue-lined shrink tubing with adhesive inside, which I bought on Amazon. It worked like a charm. You can see in the pictures that I used very little of the 1/4" tubing; the espresso machine's stainless steel-wrapped hose could have reached the pump but would have required more disassembly and reassembly and more parts, so I chose the procedure I described. The black is multiple layers of shrink-wrap pieces of varying diameters. Shrink tubing is typically used for electrical connections; however, the glue-lined shrink wrap often works excellently for plumbing.I plan to use the previous pump to provide the pressure to run a reverse osmosis water filter and softener instead of a gravity Zero Water filter. The Zero Water filter removes chlorine and heavy metals and softens the water. My espresso machine requires soft, low-mineral-content water in the provided water. I will continue to use my setup and fill the 5-gallon bottle from the little kitchen sink faucet that goes where the sprayer typically does in an under-sink, plumbed-in filter.This little pump works just as well for my purposes as the much more costly setup with a higher capacity it is replacing. This pump is a little louder but cannot be heard over the espresso machine. The pump is quite heavy, well-designed, and well-built; it should last long.You must prime the pump before it is connected to something to evacuate the air. It has a push-in John Dory or Shark Bite style connector, and they could hardly be easier to use. I put a push-fit cutoff valve in the PEX line and primed the pump until water came out before connecting it; then, I pushed the PEX in and turned the valve to open, drawing a cup of boiling water, which caused the machine to let water in. Priming was very simple; all attached now, it works perfectly. The instructions say to put the pump near the bottom of the water container. I suggest following that so it can draw the water more efficiently. It is not made to be placed above the water source.I am thoroughly satisfied with all aspects of this product, including the quality, price point, instructions, and packaging; I have no reservations about highly recommending this product.
CYBER BEAR
Comentado en los Estados Unidos el 22 de julio de 2024
This has to be one of the best-performing products I have tested as a reviewer for the Amazon Vine testing program! However, it does not have the adapters to attach it to a "plumbed-in" commercial Espresso machine. I own a La Spaziale Dream commercial espresso machine. It requires A 20 amp circuit and can draw espresso shots while steaming milk. I mention this because it can simultaneously draw water for both boilers in the machine. I connected the two differently sized water supply hoses by inserting the 1/4" O.D. tubing into the PEX tubing with the 1/4" I.D.I used several layers of 4:1 glue-lined shrink tubing with adhesive inside, which I bought on Amazon. It worked like a charm. You can see in the pictures that I used very little of the 1/4" tubing; the espresso machine's stainless steel-wrapped hose could have reached the pump but would have required more disassembly and reassembly and more parts, so I chose the procedure I described. The black is multiple layers of shrink-wrap pieces of varying diameters. Shrink tubing is typically used for electrical connections; however, the glue-lined shrink wrap often works excellently for plumbing.I plan to use the previous pump to provide the pressure to run a reverse osmosis water filter and softener instead of a gravity Zero Water filter. The Zero Water filter removes chlorine and heavy metals and softens the water. My espresso machine requires soft, low-mineral-content water in the provided water. I will continue to use my setup and fill the 5-gallon bottle from the little kitchen sink faucet that goes where the sprayer typically does in an under-sink, plumbed-in filter.This little pump works just as well for my purposes as the much more costly setup with a higher capacity it is replacing. This pump is a little louder but cannot be heard over the espresso machine. The pump is quite heavy, well-designed, and well-built; it should last long.You must prime the pump before it is connected to something to evacuate the air. It has a push-in John Dory or Shark Bite style connector, and they could hardly be easier to use. I put a push-fit cutoff valve in the PEX line and primed the pump until water came out before connecting it; then, I pushed the PEX in and turned the valve to open, drawing a cup of boiling water, which caused the machine to let water in. Priming was very simple; all attached now, it works perfectly. The instructions say to put the pump near the bottom of the water container. I suggest following that so it can draw the water more efficiently. It is not made to be placed above the water source.I am thoroughly satisfied with all aspects of this product, including the quality, price point, instructions, and packaging; I have no reservations about highly recommending this product.
CYBER BEAR
Comentado en los Estados Unidos el 22 de julio de 2024
This has to be one of the best-performing products I have tested as a reviewer for the Amazon Vine testing program! However, it does not have the adapters to attach it to a "plumbed-in" commercial Espresso machine. I own a La Spaziale Dream commercial espresso machine. It requires A 20 amp circuit and can draw espresso shots while steaming milk. I mention this because it can simultaneously draw water for both boilers in the machine. I connected the two differently sized water supply hoses by inserting the 1/4" O.D. tubing into the PEX tubing with the 1/4" I.D.I used several layers of 4:1 glue-lined shrink tubing with adhesive inside, which I bought on Amazon. It worked like a charm. You can see in the pictures that I used very little of the 1/4" tubing; the espresso machine's stainless steel-wrapped hose could have reached the pump but would have required more disassembly and reassembly and more parts, so I chose the procedure I described. The black is multiple layers of shrink-wrap pieces of varying diameters. Shrink tubing is typically used for electrical connections; however, the glue-lined shrink wrap often works excellently for plumbing.I plan to use the previous pump to provide the pressure to run a reverse osmosis water filter and softener instead of a gravity Zero Water filter. The Zero Water filter removes chlorine and heavy metals and softens the water. My espresso machine requires soft, low-mineral-content water in the provided water. I will continue to use my setup and fill the 5-gallon bottle from the little kitchen sink faucet that goes where the sprayer typically does in an under-sink, plumbed-in filter.This little pump works just as well for my purposes as the much more costly setup with a higher capacity it is replacing. This pump is a little louder but cannot be heard over the espresso machine. The pump is quite heavy, well-designed, and well-built; it should last long.You must prime the pump before it is connected to something to evacuate the air. It has a push-in John Dory or Shark Bite style connector, and they could hardly be easier to use. I put a push-fit cutoff valve in the PEX line and primed the pump until water came out before connecting it; then, I pushed the PEX in and turned the valve to open, drawing a cup of boiling water, which caused the machine to let water in. Priming was very simple; all attached now, it works perfectly. The instructions say to put the pump near the bottom of the water container. I suggest following that so it can draw the water more efficiently. It is not made to be placed above the water source.I am thoroughly satisfied with all aspects of this product, including the quality, price point, instructions, and packaging; I have no reservations about highly recommending this product.
CYBER BEAR
Comentado en los Estados Unidos el 22 de julio de 2024
This has to be one of the best-performing products I have tested as a reviewer for the Amazon Vine testing program! However, it does not have the adapters to attach it to a "plumbed-in" commercial Espresso machine. I own a La Spaziale Dream commercial espresso machine. It requires A 20 amp circuit and can draw espresso shots while steaming milk. I mention this because it can simultaneously draw water for both boilers in the machine. I connected the two differently sized water supply hoses by inserting the 1/4" O.D. tubing into the PEX tubing with the 1/4" I.D.I used several layers of 4:1 glue-lined shrink tubing with adhesive inside, which I bought on Amazon. It worked like a charm. You can see in the pictures that I used very little of the 1/4" tubing; the espresso machine's stainless steel-wrapped hose could have reached the pump but would have required more disassembly and reassembly and more parts, so I chose the procedure I described. The black is multiple layers of shrink-wrap pieces of varying diameters. Shrink tubing is typically used for electrical connections; however, the glue-lined shrink wrap often works excellently for plumbing.I plan to use the previous pump to provide the pressure to run a reverse osmosis water filter and softener instead of a gravity Zero Water filter. The Zero Water filter removes chlorine and heavy metals and softens the water. My espresso machine requires soft, low-mineral-content water in the provided water. I will continue to use my setup and fill the 5-gallon bottle from the little kitchen sink faucet that goes where the sprayer typically does in an under-sink, plumbed-in filter.This little pump works just as well for my purposes as the much more costly setup with a higher capacity it is replacing. This pump is a little louder but cannot be heard over the espresso machine. The pump is quite heavy, well-designed, and well-built; it should last long.You must prime the pump before it is connected to something to evacuate the air. It has a push-in John Dory or Shark Bite style connector, and they could hardly be easier to use. I put a push-fit cutoff valve in the PEX line and primed the pump until water came out before connecting it; then, I pushed the PEX in and turned the valve to open, drawing a cup of boiling water, which caused the machine to let water in. Priming was very simple; all attached now, it works perfectly. The instructions say to put the pump near the bottom of the water container. I suggest following that so it can draw the water more efficiently. It is not made to be placed above the water source.I am thoroughly satisfied with all aspects of this product, including the quality, price point, instructions, and packaging; I have no reservations about highly recommending this product.
Deivid
Comentado en México el 15 de julio de 2024
El producto es de primera calidad, el equipo queda totalmente protegido, me da mucho confianza llevarlo.
Jesús Prieto
Comentado en México el 29 de noviembre de 2024
Se siente de muy buen material, espacios bien diseñados, protección suprema para el dron y sus accesorios y a un buen precio
Wersitime
Comentado en los Países Bajos el 3 de octubre de 2024
Hele fijne koffer met een perfecte pasform. Wat een gemak onderweg.
Bryon H.
Comentado en los Estados Unidos el 22 de octubre de 2024
No se pudo cargar el contenido.
Bryon H.
Comentado en los Estados Unidos el 22 de octubre de 2024
No se pudo cargar el contenido.
Bryon H.
Comentado en los Estados Unidos el 22 de octubre de 2024
No se pudo cargar el contenido.
Bryon H.
Comentado en los Estados Unidos el 22 de octubre de 2024
No se pudo cargar el contenido.
Bryon H.
Comentado en los Estados Unidos el 22 de octubre de 2024
No se pudo cargar el contenido.
Bryon H.
Comentado en los Estados Unidos el 22 de octubre de 2024
No se pudo cargar el contenido.
Bryon H.
Comentado en los Estados Unidos el 22 de octubre de 2024
No se pudo cargar el contenido.
Bryon H.
Comentado en los Estados Unidos el 22 de octubre de 2024
No se pudo cargar el contenido.
Fitzgerald
Comentado en los Estados Unidos el 18 de octubre de 2024
I got this so that I can hook up my fridge's ice maker to a 5 gallon bottle of water, and it works great! Our household water supply is on a catchment tank system, so I get 5 gallon water jugs of county water to make sure that my drinking water and ice is clean and pure. It works well to pump water from the jug to the ice maker, and it dumps automatically into the ice bucket in my freezer and reloads automatically each time. I now have an infinite supply of ice, which is a dream come true for me. It also doesn't use very much water each time it refills itself, so one 5 gallon jug will last about a month, depending on how much ice I use up.It came with all required fittings and tubing to hook up directly to the fridge. The installation manual dictates that you have to sanitize the system prior to running it, which I did, but the first ten batches of ice still tasted like plastic and chemically. The smell and taste has now gone away, but it took about a week of cycling through batches for that to happen. It is also a little noisier than I expected. Whenever we are sitting in the living room, we will hear the pump go off and it is a bit jarring. Overall, great device, just be aware of the few kinks to work out before you really start enjoying it.
Fitzgerald
Comentado en los Estados Unidos el 18 de octubre de 2024
I got this so that I can hook up my fridge's ice maker to a 5 gallon bottle of water, and it works great! Our household water supply is on a catchment tank system, so I get 5 gallon water jugs of county water to make sure that my drinking water and ice is clean and pure. It works well to pump water from the jug to the ice maker, and it dumps automatically into the ice bucket in my freezer and reloads automatically each time. I now have an infinite supply of ice, which is a dream come true for me. It also doesn't use very much water each time it refills itself, so one 5 gallon jug will last about a month, depending on how much ice I use up.It came with all required fittings and tubing to hook up directly to the fridge. The installation manual dictates that you have to sanitize the system prior to running it, which I did, but the first ten batches of ice still tasted like plastic and chemically. The smell and taste has now gone away, but it took about a week of cycling through batches for that to happen. It is also a little noisier than I expected. Whenever we are sitting in the living room, we will hear the pump go off and it is a bit jarring. Overall, great device, just be aware of the few kinks to work out before you really start enjoying it.
Fitzgerald
Comentado en los Estados Unidos el 18 de octubre de 2024
I got this so that I can hook up my fridge's ice maker to a 5 gallon bottle of water, and it works great! Our household water supply is on a catchment tank system, so I get 5 gallon water jugs of county water to make sure that my drinking water and ice is clean and pure. It works well to pump water from the jug to the ice maker, and it dumps automatically into the ice bucket in my freezer and reloads automatically each time. I now have an infinite supply of ice, which is a dream come true for me. It also doesn't use very much water each time it refills itself, so one 5 gallon jug will last about a month, depending on how much ice I use up.It came with all required fittings and tubing to hook up directly to the fridge. The installation manual dictates that you have to sanitize the system prior to running it, which I did, but the first ten batches of ice still tasted like plastic and chemically. The smell and taste has now gone away, but it took about a week of cycling through batches for that to happen. It is also a little noisier than I expected. Whenever we are sitting in the living room, we will hear the pump go off and it is a bit jarring. Overall, great device, just be aware of the few kinks to work out before you really start enjoying it.
Fitzgerald
Comentado en los Estados Unidos el 18 de octubre de 2024
I got this so that I can hook up my fridge's ice maker to a 5 gallon bottle of water, and it works great! Our household water supply is on a catchment tank system, so I get 5 gallon water jugs of county water to make sure that my drinking water and ice is clean and pure. It works well to pump water from the jug to the ice maker, and it dumps automatically into the ice bucket in my freezer and reloads automatically each time. I now have an infinite supply of ice, which is a dream come true for me. It also doesn't use very much water each time it refills itself, so one 5 gallon jug will last about a month, depending on how much ice I use up.It came with all required fittings and tubing to hook up directly to the fridge. The installation manual dictates that you have to sanitize the system prior to running it, which I did, but the first ten batches of ice still tasted like plastic and chemically. The smell and taste has now gone away, but it took about a week of cycling through batches for that to happen. It is also a little noisier than I expected. Whenever we are sitting in the living room, we will hear the pump go off and it is a bit jarring. Overall, great device, just be aware of the few kinks to work out before you really start enjoying it.
Fitzgerald
Comentado en los Estados Unidos el 18 de octubre de 2024
I got this so that I can hook up my fridge's ice maker to a 5 gallon bottle of water, and it works great! Our household water supply is on a catchment tank system, so I get 5 gallon water jugs of county water to make sure that my drinking water and ice is clean and pure. It works well to pump water from the jug to the ice maker, and it dumps automatically into the ice bucket in my freezer and reloads automatically each time. I now have an infinite supply of ice, which is a dream come true for me. It also doesn't use very much water each time it refills itself, so one 5 gallon jug will last about a month, depending on how much ice I use up.It came with all required fittings and tubing to hook up directly to the fridge. The installation manual dictates that you have to sanitize the system prior to running it, which I did, but the first ten batches of ice still tasted like plastic and chemically. The smell and taste has now gone away, but it took about a week of cycling through batches for that to happen. It is also a little noisier than I expected. Whenever we are sitting in the living room, we will hear the pump go off and it is a bit jarring. Overall, great device, just be aware of the few kinks to work out before you really start enjoying it.
Fitzgerald
Comentado en los Estados Unidos el 18 de octubre de 2024
I got this so that I can hook up my fridge's ice maker to a 5 gallon bottle of water, and it works great! Our household water supply is on a catchment tank system, so I get 5 gallon water jugs of county water to make sure that my drinking water and ice is clean and pure. It works well to pump water from the jug to the ice maker, and it dumps automatically into the ice bucket in my freezer and reloads automatically each time. I now have an infinite supply of ice, which is a dream come true for me. It also doesn't use very much water each time it refills itself, so one 5 gallon jug will last about a month, depending on how much ice I use up.It came with all required fittings and tubing to hook up directly to the fridge. The installation manual dictates that you have to sanitize the system prior to running it, which I did, but the first ten batches of ice still tasted like plastic and chemically. The smell and taste has now gone away, but it took about a week of cycling through batches for that to happen. It is also a little noisier than I expected. Whenever we are sitting in the living room, we will hear the pump go off and it is a bit jarring. Overall, great device, just be aware of the few kinks to work out before you really start enjoying it.
Fitzgerald
Comentado en los Estados Unidos el 18 de octubre de 2024
I got this so that I can hook up my fridge's ice maker to a 5 gallon bottle of water, and it works great! Our household water supply is on a catchment tank system, so I get 5 gallon water jugs of county water to make sure that my drinking water and ice is clean and pure. It works well to pump water from the jug to the ice maker, and it dumps automatically into the ice bucket in my freezer and reloads automatically each time. I now have an infinite supply of ice, which is a dream come true for me. It also doesn't use very much water each time it refills itself, so one 5 gallon jug will last about a month, depending on how much ice I use up.It came with all required fittings and tubing to hook up directly to the fridge. The installation manual dictates that you have to sanitize the system prior to running it, which I did, but the first ten batches of ice still tasted like plastic and chemically. The smell and taste has now gone away, but it took about a week of cycling through batches for that to happen. It is also a little noisier than I expected. Whenever we are sitting in the living room, we will hear the pump go off and it is a bit jarring. Overall, great device, just be aware of the few kinks to work out before you really start enjoying it.
Fitzgerald
Comentado en los Estados Unidos el 18 de octubre de 2024
I got this so that I can hook up my fridge's ice maker to a 5 gallon bottle of water, and it works great! Our household water supply is on a catchment tank system, so I get 5 gallon water jugs of county water to make sure that my drinking water and ice is clean and pure. It works well to pump water from the jug to the ice maker, and it dumps automatically into the ice bucket in my freezer and reloads automatically each time. I now have an infinite supply of ice, which is a dream come true for me. It also doesn't use very much water each time it refills itself, so one 5 gallon jug will last about a month, depending on how much ice I use up.It came with all required fittings and tubing to hook up directly to the fridge. The installation manual dictates that you have to sanitize the system prior to running it, which I did, but the first ten batches of ice still tasted like plastic and chemically. The smell and taste has now gone away, but it took about a week of cycling through batches for that to happen. It is also a little noisier than I expected. Whenever we are sitting in the living room, we will hear the pump go off and it is a bit jarring. Overall, great device, just be aware of the few kinks to work out before you really start enjoying it.
dcd136
Comentado en los Estados Unidos el 26 de septiembre de 2024
Put this in to ramp up the flow of water from my RO system to a faucet in the floor above, through a modified generic 5 gallon plastic ''jug" like the one pictured in the seller's description.I'm in the process of re-purposing one of the 5 gallon cornelius kegs I use in my home brewing hobby to take the place of the 5 gallon jug (above). I'm excited to be able to use the same cleaning system I use for home brewing cleaning and sanitation with the RO delivery system. Makes it easier for me, keeps more hobbies and devices using the same routines.Recommended.
dcd136
Comentado en los Estados Unidos el 26 de septiembre de 2024
Put this in to ramp up the flow of water from my RO system to a faucet in the floor above, through a modified generic 5 gallon plastic ''jug" like the one pictured in the seller's description.I'm in the process of re-purposing one of the 5 gallon cornelius kegs I use in my home brewing hobby to take the place of the 5 gallon jug (above). I'm excited to be able to use the same cleaning system I use for home brewing cleaning and sanitation with the RO delivery system. Makes it easier for me, keeps more hobbies and devices using the same routines.Recommended.
dcd136
Comentado en los Estados Unidos el 26 de septiembre de 2024
Put this in to ramp up the flow of water from my RO system to a faucet in the floor above, through a modified generic 5 gallon plastic ''jug" like the one pictured in the seller's description.I'm in the process of re-purposing one of the 5 gallon cornelius kegs I use in my home brewing hobby to take the place of the 5 gallon jug (above). I'm excited to be able to use the same cleaning system I use for home brewing cleaning and sanitation with the RO delivery system. Makes it easier for me, keeps more hobbies and devices using the same routines.Recommended.
dcd136
Comentado en los Estados Unidos el 26 de septiembre de 2024
Put this in to ramp up the flow of water from my RO system to a faucet in the floor above, through a modified generic 5 gallon plastic ''jug" like the one pictured in the seller's description.I'm in the process of re-purposing one of the 5 gallon cornelius kegs I use in my home brewing hobby to take the place of the 5 gallon jug (above). I'm excited to be able to use the same cleaning system I use for home brewing cleaning and sanitation with the RO delivery system. Makes it easier for me, keeps more hobbies and devices using the same routines.Recommended.
dcd136
Comentado en los Estados Unidos el 26 de septiembre de 2024
Put this in to ramp up the flow of water from my RO system to a faucet in the floor above, through a modified generic 5 gallon plastic ''jug" like the one pictured in the seller's description.I'm in the process of re-purposing one of the 5 gallon cornelius kegs I use in my home brewing hobby to take the place of the 5 gallon jug (above). I'm excited to be able to use the same cleaning system I use for home brewing cleaning and sanitation with the RO delivery system. Makes it easier for me, keeps more hobbies and devices using the same routines.Recommended.
dcd136
Comentado en los Estados Unidos el 26 de septiembre de 2024
Put this in to ramp up the flow of water from my RO system to a faucet in the floor above, through a modified generic 5 gallon plastic ''jug" like the one pictured in the seller's description.I'm in the process of re-purposing one of the 5 gallon cornelius kegs I use in my home brewing hobby to take the place of the 5 gallon jug (above). I'm excited to be able to use the same cleaning system I use for home brewing cleaning and sanitation with the RO delivery system. Makes it easier for me, keeps more hobbies and devices using the same routines.Recommended.
dcd136
Comentado en los Estados Unidos el 26 de septiembre de 2024
Put this in to ramp up the flow of water from my RO system to a faucet in the floor above, through a modified generic 5 gallon plastic ''jug" like the one pictured in the seller's description.I'm in the process of re-purposing one of the 5 gallon cornelius kegs I use in my home brewing hobby to take the place of the 5 gallon jug (above). I'm excited to be able to use the same cleaning system I use for home brewing cleaning and sanitation with the RO delivery system. Makes it easier for me, keeps more hobbies and devices using the same routines.Recommended.
dcd136
Comentado en los Estados Unidos el 26 de septiembre de 2024
Put this in to ramp up the flow of water from my RO system to a faucet in the floor above, through a modified generic 5 gallon plastic ''jug" like the one pictured in the seller's description.I'm in the process of re-purposing one of the 5 gallon cornelius kegs I use in my home brewing hobby to take the place of the 5 gallon jug (above). I'm excited to be able to use the same cleaning system I use for home brewing cleaning and sanitation with the RO delivery system. Makes it easier for me, keeps more hobbies and devices using the same routines.Recommended.
B.I
Comentado en Japón el 22 de abril de 2024
軽くて丈夫なケースです。機体・送信機などその形にくり抜いてあるのでぴったり収まります。送信機にストラップ用の取り付け金具を付けていますが、ケースの一部をカッターで削ってきれいに収まりました。良いところ:送信機のスティックを付けたまましまえる。ケース自体軽い。肩掛けストラップは何気にに便利。二層構造なのでスペアパーツが下部にに仕舞っておける。悪いところ:今のところ何も思いつきません。
S. Pritchard
Comentado en el Reino Unido el 13 de noviembre de 2023
I recently acquired the DJI Mini 4 Pro as my first ever drone - an incredible piece of kit that has actually encouraged me to get outside more for the first time in over 3 years, and to get back into photography for the first time in 5 years.As many reviewers and owners have commented, the official DJI carry bag for the Mini 4 Pro is very cramped. It feels like you've got to squeeze things in and hope the zip holds. I trust the bag, but I also want to be able to carry more with me. For example, to maximise my flight time, I like to take an Anker power bank with me, USB-C cables, and various accessories - the official bag doesn't offer nearly enough space for this.That's where this case enters. Other reviewers of it have mentioned that the bottom and top of theirs were both 'dented', or curved inwards. This was also true with mine, but this appears to have been caused by low pressure inside the case (mine was vapour-locked when it arrived). After a few days, both sides have flattened out. Some reviewers also mentioned that their drone 'rattles' a little bit and I could say the same, but I opted to pad mine using a cloth so it's secure in place.As you can see from the photos, there's plenty of space inside. Inside mine, I'm able to fit the Mini 4 Pro, its battery charger, the RC2 controller (with a cover still attached), a beefy Anker power bank and USB-C cables, the Freewell filter pack, a lanyard for the controller, a fast charger (designed for mini 3 pro, but suitable for mini 4 pro if you urgently need some quick charge), some cleaning cloths, silica gel packs, and a ziplock bag (located under the controller). This means that I'm even prepared for drying it out in the eventuality that the drone gets caught in the rain.Something to be aware of - the larger iPad Pro 12.9" is a little too large to fit inside the inset area in the bottom level of the case. A smaller iPad would definitely fit though. A 14" M1 Macbook Pro is only a couple of millimetres too wide to fit in the case, but a slightly smaller laptop would fit inside.This case is significantly more bulky than the original carry bag, but that's a trade-off that I'm generally willing to make until DJI realise that they should offer better options for carrying their drones.Overall, a very good case and well worth the investment.
Productos recomendados

Mex $289.69

Mex $ 150 .00 Mex $150.00

5.0
Elegir

Mex $997.00

Mex $ 548 .00 Mex $548.00

4.9
Elegir