No hay artículos en el carro
No hay artículos en el carroDescripción del producto
visualización de piezas de instalación del producto
Las piezas de instalación del producto incluyen placas base, paneles laterales, paneles traseros, paneles superiores, clips, conector de cubeta, ganchos y un martillo.
Prepara dos placas base
Fija los clips, asegurando que las caras laterales redondeadas hacia afuera. Los lados cruzados de los clips opuestos deben estar mirados entre sí. Asegure los clips firmemente.
Instalar paneles laterales
Fija los paneles laterales a las placas base.
Adjuntar clips de partición
Instala los clips para conectar los paneles de partición, asegurándote de que los ganchos estén orientados hacia arriba.
Instalar panel trasero y paneles de división
Fije el panel trasero y los paneles de división a la estructura.
Instalación del panel superior
Coloca el panel superior, asegurando que la parte trasera del clip esté hacia afuera.
Apilar paneles secuencialmente
Sigue apilando los paneles en orden.
Clips seguros con martillo
Utiliza un martillo para golpear los clips, asegurando que estén firmemente en su lugar. Luego, instala los ganchos.
Paulette
Comentado en los Estados Unidos el 31 de marzo de 2025
Not what I was expecting, and there are a few reasons that I wouldn't recommend it.The listing claims that this is "waterproof and dustproof". There is no way that this keeps out moisture, and I already know that it doesn't keep out dust.It is easy enough to put together, but if you don't make sure the corners are secure it will just fall apart. It comes with a wood mallet to smack the frame and corner pieces together. It doesn't help, just push hard.Also, the corner connectors are round, and the instructions show them with the circles vertical - even on the bottom. I shifted the bottom ones horizontally, which then keeps the whole thing from being able to be pushed flush to the wall.I am using it to store craft and shipping materials. It was supposed to be for kids crafts for my grandkids, but there is no way it survives kids regularly going in and out. It works well enough as storage for my things.
lala
Comentado en los Estados Unidos el 20 de marzo de 2025
Very easy to put together! Took me about 30 minutes and it’s surprisingly very sturdy. I was able to move it to one room to the other in one piece, and it’s able to support all my shoes and some of them are heavy.
Kelly
Comentado en los Estados Unidos el 1 de marzo de 2025
If I could give this no stars, I would! Don’t waste your money, it’s garbage and overpriced!! Unfortunately I will be getting a nicer one that isn’t plastic and will stay together! This is how it fell apart, several times, with only 3 pairs on it.
Richard
Comentado en los Estados Unidos el 12 de febrero de 2025
The pictures of the organizer gave me the impression of more sturdier unit than what it turned out to be, but in our household (my wife and I are retired) it will do a great job of organizing many shoes.The unit arrived well packed and protected.The panels are made of a cloth-type material and are not solid, plastic-type material.Overall, each of the parts are sturdy and well made. I did not break, bend or damage anything during assembly. Each part is well packaged and well identified. Nothing missing.I love getting things that require assembly and consider myself very good at figuring out how to assemble stuff especially when the directions are not super clear, like in the case of this shoe organizer.Note that the instructions are pictures and not written, which sometimes, when translation to english is required, especially from China, can be much easier to follow. In this case, it takes some ingenuity and patience as you will make mistakes and have to retrace steps during assembly due to the drawings not being very clear or very large. (A magnifying glass will help considerably.) That is the biggest con on this shoe rack.I put each tier together and assembled them as I went along. When I got to the last tier, I mistakenly installed it upside down which threw off the spacing in between the shelves. But this turned out ok as the spacing between the shelves does not allow for ankle high boots. Pictures 5 and 6 above show the taller boots in the bigger space provided by my mistake of installing the top tier upside down. (Note that doing it this way loses two cubicles for normal sized shoes)We put 20 pair of shoes/boots/flip flops and it held them with no structural problem. We like how it organizes and neatens our laundry room and declutters it.I take away one star due to the instructions not being clear and having to figure things out on my own and frequently had to "undo" things when I realized I had proceeded incorrectly. Otherwise, it is sturdy once completed and should hold up to our use. A younger household with kids...maybe not so much.
occultclassic
Comentado en los Estados Unidos el 4 de abril de 2025
I had a good time assembling this storage cabinet. The instructions are easy to follow for assembly and for some reason I found it more fun to assemble than other items I have assembled previously. Perhaps because it is kind of odd and unique in terms of the design. I really love how versatile it is. There are a number of ways you can choose to set it up. I originally assembled it the way it suggests in the instructions in terms of the 2 cubes wide and 4 cubes tall. However, since I now am going to put it in a different space than I had originally planned; I am going to change the shape and reassemble 4 cubes wide and 2 cubes tall. Since I have boots that require more height than your average shoe, I opted to not assemble the middle shelves that break up each cube into 2 sections. Instead, I just skipped the extra shelving, so as to create more vertical space for my boots. I like that I have the option to store more shorter shoes or other items if needed in the future. Since it has the dust proof doors/covers for each cube, it can house more than just shoes that you want to keep clean and safe. It is admittedly on the flimsier side and not the easiest to move or lift up without parts coming apart. However, I can slide it without it damaging or scratching my hardwood floors, which is a really nice thing, in my book. I find that the pros far out way the lack of sturdiness. I see myself keeping this product for a long time since I really love the versatility, ease of assembly, unique design, dust-proof aspect, and overall vibe. Highly recommend to those that would appreciate the positives I have mentioned and are less bothered by the quirkiness and flimsy nature. To each their own, so just make sure you are honest with yourself in terms of your preferences prior to ordering.
Productos recomendados
Mex $252.49
Mex $ 151 .00 Mex $151.00
Mex $258.79
Mex $ 129 .00 Mex $129.00