Love these clips

Se siente solido y quedo muy bien con la funda de mi BK2. Sin embargo tuve que usar los tornillos que ya traía el cuchillo porque los que vienen con este adaptador, por lo menos el que yo recibí, estan muy cortos, demasiado diría yo.

Exlenete calidad viene con tornillos y el clip es muy seguro tiene doble seguro, no te va a fallar y lo puedes poner en muchas configuraciones. Yo compré dos para ponerlos en un par de fundas de Kydex de mis cuchillos lo recomiendo ampliamente

El material se ve y se siente muy resistente.Fácil de montar y desmontar, sin tener que sacar el cinturón.A pesar de que este broche solo se puede abrir con dos dedos y algo de fuerza tiene un seguro para evitar poder abrir el broche.Tiene una cuadricula con 9 perforaciones, lo que permite colocar el cuchillo ya sea vertical, como horizontal, zurdo o diestro.queda bien en fundas de sistema molly, de mis otros cuchillos.Dentro lleva dos separadores que se ajustan al ancho del cinturón que quieras usar.quedo perfecto en la funda de mi cuchillo BK2, convirtiéndolo de una funda con una sujeción pera mi gusto muy mala, en un cuchillo versátil y cómodo sencillo.Tal vez compre otro para mi cuchillo SOG Kiku.Lo recomiendo plenamente

2本挿しシース自作でベルトループもカイデックスだと重みに負けそうで不安がありましたのでこちらを購入。ベルトの左に斜めに固定で邪魔にもならず良い感じです。保持力も問題無しです。

¿Por qué han canviado la foto del producto en el transcurso de mi pedido? .No es el mismo modelo.Lo recibo mañana.Me temo que tendré que perder mi tiempo en devolverlo.Cuando lo reciba, haré otra reseña tras analizar el producto.Lo quiero para un bk2 companion y repito según la foto no es el producto que pedí. No se si valdrá. O si me están tomando el pelo.

I like the Tec-Loc adapter and they work well with Kydex or Kydex style sheathing systems. It can be worn many ways and is easy to use. i have a large Spyderco fixed blade that has been out of production for years thus finding anything to add to it, other than custom sheaths, is difficult. There are two sizes to choose from so you should be able to find that it works for your knife. It also stands up to a fair amount of hard use. i have had no issues with any of mine thus far even as an EDC (every day carry) knife system.

Based on other reviews across the net about this little mod, I figured it was exactly what I needed. I'm not a fan of hanging nylon belt loops on knife sheaths, and this handy device replaces that AND gives your BK2 more ways to be attached to you or your gear.There are no instructions with the Tek-Lok, however it doesn't take much Googling to find various ways to install it on your sheath. The toughest part of putting it on my BK2 was the removal of the 3 rivets that hold the nylon belt loop to the Kydex sheath that comes with the knife. By using a small sharp wire cutter, you just carefully nibble at each of the 3 rivets until you can pop them out. Took me about 10 minutes total, then it was on to the rest of the install.To install the Tek-Lok to the BK2 sheath, you need to remove the 4 screws of the belt loop holder from the rest of the sheath. A phillips screwdriver will do that easily. Now, figure out which position you want to install the Tek-Lok (keeping in mind if you want it to be installed for left or right handed pull of the knife out of the sheath). I wanted my knife to install scout-style (horizontal instead of vertical) and I used the middle row of holes on the Tek-Lok. Using the hardware provided with the Tek-Lok, insert the threaded grommets into the Tek-Lok from the inside (clasp open) and then line up the grommets with your BK2 belt loop holder and use the included screws to tighten. You will not need the 3 rubber grommets that come with the Tek-Lok. I actually used one of the grommets to push against the backside of the threaded metal grommets to give me some traction when tightening the screws. Now that you're done with this part, just re-install the BK2's belt loop holder piece back to the BK2 sheath and you're ready. Tip: throw a little drop of Loc-Tite on the threads of the screws on the Tek-Lok so it doesn't come loose (Loc-Tite is not included with this product, you'll have to get it from your local hardware store).The Tek-Lok also comes with 2 snap-in belt loop sizing spacers. These snap into various positions inside the Tek-Lok so you can use this device with various sizes of belts and straps without it feeling loose. Take both of the spacers out and you can fit the Tek-Lok on up to a 2" webbed belt or smaller padded backpack strap. Or, put the spacers in and this will fit your knife snugly on even the thinnest uniform belt.One last feature to mention is the additional clasp lock that keeps the Tek-Lok closed and prevents it from accidentally getting opened up if bumped. The two release latches on the side of the clasp are very strong and they should stay in place, but the rotating clasp lock ensures that these two latches cannot be pressed in and come unlatched. Very nice little feature. Just use your thumb to roll it out of the way and you can quickly undo your Tek-Lock clasps and remove it.I use the Tek-Lok in the scout-style position to attach my BK2 to my belt or to my shoulder straps of my various backpacks and bail-out bags. Now it's right up on my chest and ready to pull down in a split second. This position also makes it great on my belt so the knife doesn't hang vertical and get in my way if I have to squat down or sit. The composite material that the Tek-Lok is made out of is extremely strong and I can't imagine breaking it unless I fall off a cliff while wearing it, or smash it with a hammer.Best mod ever for your Becker BK2 and worth every penny.