Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Cable de Extensión para AMS Lite, Cable de Extensión de 1M de 4 Pines para Accesorios de Impresora Bambulab A1/A1 Mini 3D (con anillo magnético)

4.6 (2) Escribir comentario
Envío gratis en pedidos superiores a Mex $600.00

Mex $209.00

Mex $ 117 .00 Mex $117.00

En stock

1.Tamaño:Modelo Sin Anillo Magnético


Acerca de este artículo

  • Conectividad perfecta: conecte su mainframe de la serie A1mini con AMS Lite sin esfuerzo utilizando este cable de extensión de 1m y 4 pines para extender las líneas de alimentación y datos.
  • Núcleo de cobre: ​​el cable de extensión cuenta con un núcleo de cobre de alta pureza de 22 AWG para una transferencia eficiente de energía y datos, lo que garantiza un rendimiento excelente.
  • Cable de PVC: El cable de PVC de 5 mm de espesor con interfaces encapsuladas brinda durabilidad y confiabilidad, lo que lo hace duradero para un uso prolongado.
  • Llegada extendida: con este cable de extensión, puede colocar cómodamente AMS Lite más lejos de sus dispositivos, brindando comodidad y flexibilidad en el posicionamiento.
  • Cómoda gestión de cables: la brida para cables incluida permite un fácil almacenamiento cuando el cable de extensión no está en uso, manteniendo su espacio organizado sin esfuerzo.


Descripción del producto

Extension Cable for Bambu Lab AMS Lite
Extension Cable for Bambu Lab AMS Lite
Extension Cable for Bambu Lab AMS Lite
Extension Cable for Bambu Lab AMS Lite
Extension Cable for Bambu Lab AMS Lite

Lionel "Lio" L.
Comentado en los Estados Unidos el 1 de abril de 2025
Needed some extra length of cable to be able to mount the AMS on the wall and this set was just what the doctor ordered. Not much to say other than that since it's just an extension cable for the AMS Lite with no other function than to make a cable longer...
Steve R.
Comentado en los Estados Unidos el 12 de abril de 2025
This cable is very convenient and useful if you keep your AMs in an inconvenient spot from your A1.I've never used the side mount as I printed and started using the top-mount right away, and then found this vertical, rotating mount that clamps to the back base of the machine. Very good in space saving and greatly reduces the amount of shaking/vibration on the A1 during printing.The only problem is that the standard AMS cable doesn't reach the port if you want the numbers facing right-side up, so I ordered a set of 2 of these cables and they work great, as you can see in the pic, the cables are running from the top rear of the 2 AMS's, with plenty of room to the port on the back.So much extra room that I needed to twist-tie the slack while still having room to rotate the tower.I gave this 4 stars only because 1 of the 2 pack I bought didn't fit the plug and needed to order another cable.Upon placing my return order for it, they did not ask for me to return the bad cable after issuing the refund so I can buy the replacement, which I guess is convenient, but I can't do anything with the bad one so I'm probably just going to throw it away.Other than that, my only other nit-picky complaint would be that they make some kind of clip receiver to accept the fastener clip on the end of the original cable to ensure proper security, especially for something that hangs like this.No clip insert, so you just push them together until they feel tight and secure enough with the clip on the original just sitting on a flat surface. Could be worse, I guess, but a small divot for that clip to rest in would be a great improvement.
Productos recomendados
Creality - Motor extrusor K1/K1 Max/K1C, motor de pasos circular original K1 Max motor de pasos 3D, motor paso a paso de 0.8A 12 dientes, motor paso a paso de impresora 3D para K1 SE/Ender 3 V3/Ender

Mex $1,103.37

Mex $ 595 .00 Mex $595.00

4.3
Elegir
VERSAINSECT LCD 3D Printer Accessories Post Processing Tool Kit Silicon Slap Mad Container Spray Funnel Filter Tray Pliers to Remove, Clean, Smooth 3D Prints/Resin Vat/3D Print Platform

Mex $618.57

Mex $ 303 .00 Mex $303.00

4.5
Elegir
Guía de Eje de Varilla de Movimiento Lineal de 8mm, Eje de Riel Lineal de Acero Cromado de Alta Precisión para Impresora 3D, 2 Uds.(400mm)

Mex $363.00

Mex $ 163 .00 Mex $163.00

4.9
Elegir
Lámpara LED impresa en 3D, componentes de modelo creativo para impresoras Bambu Lab Makerworld MH001, luz LED cálida compatible con Bambulab A1/A1 Mini, P1P/P1S, X1/X1C/X1E 3D, 2 paquetes, impresiones

Mex $424.16

Mex $ 216 .00 Mex $216.00

4.4
Elegir
(20 piezas) Racor de tubo neumático recto Push to Connect para impresoras Bowden Ex 3D PC4-M10 / PC4-M6 Conectores De Conexión Rápida Para Conectar El Tubo

Mex $253.00

Mex $ 144 .00 Mex $144.00

4.9
Elegir
WINSINN 3010 24V DC Cooling Fan 30mm 30x30x10mm for DIY 3D Printer Extruder Hotend V6 V5 CPU Arduino - 2Pin 0.07A 2.4W 9000+-10% RPM (Pack of 5Pcs)

Mex $280.36

Mex $ 165 .00 Mex $165.00

4.8
Elegir
KLVN Conductor de microstep DM542 Controlador de Motor Stepper Digital Digital Stepper Driver Corriente Continua MAX 4.2a 20-50v

Mex $1,472.17

Mex $ 691 .00 Mex $691.00

4.9
Elegir
Kit de 6 boquillas extrusoras de impresora 3D para Kobra 2/2 Neo/2 Pro/2 Plus/2 Max, empaquetadas de alta temperatura, 2 boquillas de acero endurecido de 0,4 mm, 1 boquilla de 0,2 mm, 1 boquilla de

Mex $252.00

Mex $ 151 .00 Mex $151.00

4.8
Elegir