No hay artículos en el carro
No hay artículos en el carroKit de 6 boquillas extrusoras de impresora 3D para Kobra 2/2 Neo/2 Pro/2 Plus/2 Max, empaquetadas de alta temperatura, 2 boquillas de acero endurecido de 0,4 mm, 1 boquilla de 0,2 mm, 1 boquilla de latón de 0,6 mm, 1 boquilla de 0,8 mm y 1 pieza de 1,0 mm. Compatible con impresoras 3D FDM: Anycubic Kobra 2 Anycubic Kobra 2 Neo Anycubic Kobra 2 Pro Anycubic Kobra 2 Plus Anycubic Kobra 2 Max Incluye: 2 boquillas de acero endurecido de 0,4 mm. 1 boquilla de latón de 0,2 mm. 1 boquilla de latón de 0,6 mm. 1 boquilla de latón de 0,8 mm. 1 boquilla de latón de 1,0 mm. Nota: piezas pequeñas, por favor, manténgalas alejadas de los niños para evitar el riesgo de tragar
Lee B.
Comentado en los Estados Unidos el 11 de marzo de 2025
These nozzles have worked great for my Anycubic Kobra 3! The fit and print quality of the nozzle has met my expectations.
D West
Comentado en los Estados Unidos el 22 de diciembre de 2024
I was happy to receive this in order to complete an order for some. 3D prints. When I opened the box and found that the package saiid it was a nozzle for the K1/K1 Max, I was disappointed. I started a return and thought I would take the original nozzle and measure both the hardened nozzle and the brass. The caliper measurement was exactly the same between the two. I don't know if the package was mis labeled or what but they need to be careful with this! I will update this after I run some prints through the nozzle to see if it is a good fit!
3d Reviews
Comentado en los Estados Unidos el 13 de noviembre de 2024
I have about 20 print hours with this nozzle now. It is surprisingly well made, holds temperature constant and the nozzle hole is nice and smooth, no burrs and my filament comes out in one smooth line, no breaks.
Nicholas L.
Comentado en los Estados Unidos el 25 de octubre de 2024
Used these nozzles on my mostly stock Creality K1 (bentobox filter + improved chamber sealing) to print some ASA-GF parts for my Creality K1 linear rail conversion and my Voron 2.4. I used the 0.4mm nozzle, and so far, no issues! Really happy with how these came out overall!
Jefferey Bowman
Comentado en los Estados Unidos el 12 de octubre de 2024
Pros:-Well-made.-Great selection.-Affordable.Cons:-Can be a pain to install. (That might be more of a printer problem than a nozzle problem.)Final thoughts:Good price, good selection, works well. All brass (seems to be). Recommended.
Productos recomendados
Mex $269.99
Mex $ 156 .00 Mex $156.00
Mex $295.00
Mex $ 153 .00 Mex $153.00
Mex $954.71
Mex $ 505 .00 Mex $505.00