Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Creality Official Ender 3 V3 SE KE Hotend - Kit de actualización para impresoras 3D, bloque de calefacción de cerámica con boquilla de intercambio rápido, soporta 300 °C de alta temperatura, 600 mm/s

Envío gratis en pedidos superiores a Mex $600.00

Mex $847.86

Mex $ 398 .00 Mex $398.00

En stock
  • Kit oficial Hotend para Ender 3 V3 SE/KE: 100% Creality Kit de bloque de calefacción de cerámica oficial para impresoras 3D Ender-3 V3 SE/KE, nuestro hotel Creality KE se puede utilizar para impresión de alta velocidad. Aviso: Asegúrate de que el tubo de teflón oficial de Creality Ender 3 V3 SE KE Hotend actualiza la longitud del tubo de teflón de 0,028 M corresponde a Ender-3 V3 KE, la longitud del tubo de teflón de 0,022 M corresponde a Ender-3 V3 SE
  • Hasta 600 mm/s Impresión de alta velocidad: el kit de bloques de calefacción de cerámica Ender 3 V3 KE con un aumento del 30% en toda la sección de fusión en caliente, el bloque de calefacción Ender 3 V3 KE permite velocidades de impresión de hasta 600 mm/s. El orificio sin rebabas del Ender 3 V3 SE hotend es menos probable que obstruya el material y proporciona una impresión estable
  • Kit de boquillas de intercambio rápido actualizado: la boquilla integrada mejorada Ender 3 V3 SE hotend reduce la obstrucción y mejora en gran medida la fluidez de los consumibles para aumentar la tasa de éxito de la impresión. El bloque térmico estable Ender 3 V3 SE hace que la impresión sea más estable y la precisión de impresión es mayor. Diseño integrado totalmente metálico: Ender 3 V3 SE cerámica hotend con boquilla de intercambio rápido integrada con todo el material de metal hotend y rotura de calor para resistencia a altas temperaturas de 300 °C
  • Material duradero actualizado: el kit de garganta extrusora de impresora 3D está hecho de aleación de titanio para minimizar la transferencia de calor. El kit de bloques de calefacción de cerámica Creality Ender 3 V3 KE es adecuado para imprimir en una amplia gama de consumibles como PLA, ABS, PETG, TPU, PP, PC, PLA-CF, PA-CF, PET-CF, etc. Aviso: Asegúrate de una buena adherencia en la primera capa de impresión; si es necesario, vuelve a ajustar el nivel y aplica calcomanía para mejorar la adherencia. La obstrucción de la boquilla puede ocurrir con una adherencia inadecuada de la primera capa, lo que hace que la boquilla recoja material de impresión suelto y lo deposite fuera a medida que se mueve
  • Alto flujo y enfriamiento eficiente: la parte de disipación de calor del kit Creality Ender 3 V3 KE adopta un diseño dividido para reducir la transmisión de calor; la superficie del bloque de calefacción de cerámica está niquelada para mejorar la resistencia a la abrasión y aumentar el lustor; el kit de montaje de hotend está equipado con un anillo de calefacción de cerámica resistente y potente de 60 W y 360 °, que se puede calentar a 20 ° en 40 segundos segundos


Kit de actualización oficial de Creality Ender 3 V3 SE Hotend, impresoras 3D, kit de bloque de calefacción de cerámica con boquilla de intercambio rápido, soporta 300 °C de alta temperatura, 600 mm/s de alta velocidad para Ender 3 V3 SE/Ender 3 V3 KE
Características:
Alta conductividad térmica
Impresión de alto flujo
Resistencia a altas temperaturas de 300 °C.
Fácil de instalar.


Rodney
Comentado en los Estados Unidos el 27 de enero de 2025
Replacement for KE where the original heating block and hot end had broken. Installation of the original fan was difficult as the original screws barely reached. Had to rotate it 90 degrees so the screw would get a solid hold.The two mounting holes for the block to the extruder worked fine. The wiring fit onto the extruder without issue.Temperatures were consistent with the original block and heating element, but not really an upgrade just the same level for the KE.
Tim Barger
Comentado en los Estados Unidos el 19 de enero de 2025
I was having trouble with my extruder skipping and getting very poor print quality. I replaced the extruder stepper motor and extruder, thinking that was the problem since my printer showed that my hot end was getting up to temp. After nothing worked, I figured I would replace the hot end since it was the original hot end from when I bought the printer 2 years ago. WOW! What a difference this hit end has made. Now I get better prints then when my printer was new!. About the product. It is an upgrade hotend for the Ender 3 V3SE and KE. It uses the unicorn nozzles, so don't try using the sprite nozzles, they won't work. The new hotend was an easy installation by just removing the shroud and extruder, the removing the 4 screws holding the fan. The new hot end attaches perfectly to where the original hot end mounted. The electrical connections fit precisely as it was the original hotend. It took me about 10 minutes to take off and replace. I ran the leveling program and then did a level test print. The test came out almost perfect. I did raise the Z offset up by 1. This hotend upgrade is producing fantastic prints. This has solved my extruder skipping problem. Sometimes I just get to tunneled vision and didn't realize how much I had printed with the original hotend and they do wear out after awhile. I am very happy with this hotend upgrade and recommend it to those of you who own an Ender 3 V3 SE or KE.
Knight8223
Comentado en los Estados Unidos el 5 de abril de 2025
To be blunt I bought like three of these and all of them burnt out or quite literally fell apart during a print… upon dismantling my assembly I noticed that the small screws the hold the heating elect to the heat sink didn’t even reach the intended position when fully assembled… bought the basic assembly and haven’t had a issue since
Peggy Elrod
Comentado en los Estados Unidos el 28 de agosto de 2024
Ok I have to say I love this it works great does 300c and has never closed but it does not state it has to have unicorn tips which are much more expensive than normal extruder tips but it prints beautifully and has not clogged and even prints nylon filament great and it does it fast faster than normal tips as unicorn tips are all metal and has larger area for melting so can print and feed faster so if you don't mind paying $12 for 1 tip or I found 3 different a .04+.06+.08 for $19 but it works great I gave 4 because it only says quick swap tips not where other post state requires unicorn tips
JT
Comentado en los Estados Unidos el 14 de diciembre de 2024
Please note, this upgrade does not use the standard OEM nozzles, but the Unicorn Quick swap nozzles. They use hardened steel, titanium, and copper on the nozzle with the upgraded heater really did help with the prints and I was able to bump the speed up on some prints. It really does heat up faster and seems easier to maintain temperature. I will be printing ASA CF and ABS, along with PLA CF and PETG, so I like the fact that this nozzle is ready for all of those materials without needing to swap nozzles out. Another benefit is that you don't have to worry about the nozzle being perpendicular to the bed like with the OEM one that needs adjust straight out of the box with the two alignment/securing screws. IMO, well worth the price and easy to swap out if you follow the instructions
Productos recomendados

Mex $1,287.13

Mex $ 579 .00 Mex $579.00

4.9
Elegir

Mex $854.57

Mex $ 418 .00 Mex $418.00

4.7
Elegir