No hay artículos en el carro
No hay artículos en el carroRenron
Comentado en los Estados Unidos el 23 de marzo de 2025
First, I love it. Works fantastic and releases the prints like magic. I can't find fault with anything about this new bed plate.I've had my Ender 3 V2 since it was released in the summer of 2020. It came with the glass bed and it worked well until recently, nothing would stick and prints would fail. My son who owns a new Bambu Labs printer suggested a PEI magnetic replacement bed, so I purchased the Creality model designed for their printers.This is MAGIC, some kind of Vudu sorcery how well this works. I should have upgraded years ago. PLA sticks very well and when the bed cools it pops off with a light touch! I don't even have to lift the bed off the heater, it just is perfect. I love the texture it produces and you can print on both sides. The Gold is a nice classy upgraded refresh look for the printer that is showing it's age. The magnetic 3M peel and stick is easy to apply and holds the print bed very firmly, no wiggle.This is a Great value and will keep this printer going a little longer until I save up for a Bambu Labs. If your prints aren't sticking to the old glass anymore, and your hoping to get a few more prints out of that old machine this will help.
Rubén Aguilera
Comentado en México el 17 de agosto de 2024
Es muy cómoda para retirar las impresiones, Su adhesión es de otro mundo aún sin laca, sólo hay que presionar un poco la punta para que se peque bien, la ventaja es que luego de que queda la impresión, por muy pegada que esté, se levanta fácil.
Roberto
Comentado en México el 2 de junio de 2024
Durante la pruebas iniciales de la placa de PEI, se han tenido buenos resultados. La he usado con PLA y PETG y no se han despegado las piezas durante la impresión. Al terminar la impresión, las piezas se separan de la placa sin problema flexionando ligeramente.Antes de comprar ésta placa, probé con otra PEI genérica con pésimos resultados.
Héctor FC
Comentado en México el 10 de mayo de 2024
La compré con pocas expectativas ya quecambié a un extrusor con sensor de proximidad sin saber que era necesario tener una cama PEI debido a este sensor, peroestoy muy impresionado con los resultados, mejoró bastante la adhesión de la primera capa, he probado con PLA Y PETG, es super facil remover las piezas y el sensor de proximidad se calibra sin problema con esta cama.
Carlos Cuello
Comentado en México el 28 de marzo de 2024
Me gusta que ahora puedo quitar las piezas grandes mucho mas facil que con la cama de vidrio.
クロロ
Comentado en Japón el 1 de febrero de 2024
No se pudo cargar el contenido.
admd
Comentado en Canadá el 22 de diciembre de 2024
I purchased this plate under the impression that its dimensions were 265mm x 250mm but it actually measures 235mm x 235mm. The actual size is buried deep within the product description, making the item title misleading. The size mentioned in the title should be removed.
Rogelio
Comentado en México el 13 de noviembre de 2024
Excelente calidad y buena adherencia, solo hay que cuidar que esté limpia, siempre remuevo bien los restos de plástico y limpio la cama con alcohol isopropilico para eliminar grasa y suciedad, no me a dado problemas de adherencia, de las mejores opciones para remplazar la cama original y me gusta que con su imán ya no tengo que estar poniendo los broches en la cama
dfunk
Comentado en los Estados Unidos el 12 de noviembre de 2024
Best build plate I've used!Pros:I have an ender 3 and have had the original bed plate since 2021. I've tried glass plates (hit or miss) but ultimately went back to the original creality bed plate.I use Hatchbox pla and it adheres with zero issues. When printing has finished, my prints come off with ease and no residue. So easy to clean the purge filament and print that I no longer have a use for the scraper that came with the printer.The magnet that you stick to the bed has the precise amount of magnetism you want where it the pei plate won't move during a print but not overly strong where you can remove it. As close to perfect as it gets.The price was absolutely worth it and didn't break the bank at just 15.Quite possibly the best 15 you will spend on an upgrade.Cons: only one con (possibly) if you for whatever reason need access to the screws that hold the adjustment wheels removed it could be difficult since the magnet is stickered onto the bed.Other notes: the size is accurate for my ender 3 and completely disregard the reviewer video that showed his not staying in place. That video was either fake or he did something wrong. I fully recommend this to anyone needing to resolve adhesion issues, or wanting to eliminate clips.I would recommend one more thing before this upgrade: upgrade your knobs to metal and replace your springs with silicone not another set of metal springs. Silicone is superior in my opinion.Hope this helps someone!
レグホーン
Comentado en Japón el 23 de enero de 2024
ENDER3標準のガラスベッドに糊を使用してきましたが、早く交換すれば良かったと思いました。テストでABSを出漁してみましたが、定着良好、剥がしやすいです。難点を上げるとすれば定着面の凸凹が目立つ程度でラフト設定すれば問題なさそうです。
Angel
Comentado en México el 20 de abril de 2024
Solucion la mayoria de mis problemas de warping aparte que le da un buen acabado y es mucho mas facil despegar las piezas una vez terminadas.
Ernesto
Comentado en México el 18 de diciembre de 2023
excelente producto, cumple con lo que indican
PABLO GLEZ
Comentado en México el 18 de noviembre de 2023
Llegó en muy buenas condiciones, muy bien empaquetado y funcionan excelente.
Productos recomendados