No hay artículos en el carro
No hay artículos en el carro Descripción general Enfriador activo (B) para Raspberry Pi 5, ventilador de enfriamiento activo, disipador de calor de aluminio, con almohadillas para orejas térmicas. Basado en Raspberry Pi 5: combina el tamaño y los agujeros de montaje de la Raspberry Pi 5, combina un ventilador de ventilador de temperatura controlada con un disipador de calor de aluminio para acelerar la disipación del calor
Especificaciones: entrada de voltaje: 5 V CC (suministrado a través de un cabezal de ventilador de cuatro pines en Raspberry Pi 5). Control de velocidad del ventilador: control de modulación de ancho de pulso con tacómetro Flujo de aire máximo: 1.39 CFM. Velocidad del ventilador: 8000 10% rpm Material: aluminio anodizado.
Cómo instalar
Conecta el cable de 4 pines al cabezal del ventilador en Raspberry Pi 5, conecta almohadillas para orejas térmicas y fija el enfriador activo a través de pasadores de empuje cargados por resorte.
Contenido del paquete Pi5-Active-Cooler-B x1 1 almohadilla térmica (3 piezas)
Bruce S.
Comentado en los Estados Unidos el 19 de febrero de 2025
All of the thermal pads were of the same thickness. This doesn’t work well has the cpu is taller than the rest Fortunately, I had a few extra pads of different sizes. Otherwise I would have returned this item.
Jason Yaman
Comentado en los Estados Unidos el 9 de abril de 2025
Bought the raspberry pi 5 for a project that started to heat the processor more then I expected. Had to order this to fix the overheating. The fan was able to keep everything cool well below where I need it be. Quite fan and fits perfectly for the Pi5.
Bookmobile
Comentado en Canadá el 16 de mayo de 2024
I had to return another brand active cooler because it came missing the mounting screws. This one uses pushpins to mount to the Raspberry Pi 5 and seems essentially to be identical to the 'official' RPi 5 active fan.It's been in continuous use since purchase several weeks ago and working perfectly. Fan control via Pi also works perfectly.
Scott Reeves
Comentado en los Estados Unidos el 14 de mayo de 2024
I got this for my 9 yr old and he installed it in minutes and it works great
Sathen
Comentado en los Estados Unidos el 1 de abril de 2024
This was far easier than I expected to install. The kit comes with 3 thermal pads, remove the plastic on one side then apply it to the chips (shown in the pictures), then hold the pad down with a finger and use a razor to help pry the plastic film from the other side. With the thermal pads fully exposed, line up the pins on the fan with the holes on your Pi and press down till you hear a click. The final thing to do is plug the fan into the Pi's fan port (the fan port on the pi has a plastic guard, i used a razor blade to pop mine off). I had no problem booting up my pi with the fan and the M.2 adapter using a Pi5 approved power supply. When the Pi is first turned on, the fan will spin up at full speed and then turn off after it boot-up. If the pi gets warm the fan will automatically kick on to cool the processor. Overall I'm really happy with this fan and heat-sync. I am not planning to overclock my pi, but i noticed the processor was too hot to touch during normal use, so this will give me some peace of mind.
Productos recomendados
Mex $129.89
Mex $ 64 .00 Mex $64.00
Mex $293.50
Mex $ 132 .00 Mex $132.00
Mex $169.00
Mex $ 99 .00 Mex $99.00