No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Avance térmico Grizzly Minus Pad
almohadillas para orejas térmicas de alto rendimiento para aplicaciones versátiles
Las almohadillas para orejas térmicas Minus Pad Advanced eléctricamente no conductoras se basan en el probado Minus Pad 8 y se han optimizado para mejorar la conductividad térmica y la compresibilidad. Son adecuados para SSD, enfriadores de tarjetas gráficas, enfriadores de agua GPU y componentes electrónicos.
Muy buenas características para un rendimiento óptimo
Las almohadillas para orejas térmicas ofrecen una excelente conductividad térmica y una alta compresibilidad. Son fáciles de usar y, gracias a su no conductividad eléctrica, especialmente seguros para componentes electrónicos.
Disponible en varios tamaños y grosores
Están disponibles en tamaños de 100 × 100 mm y 120 × 20 mm, con opciones de grosor de 0,5 mm, 1,0 mm, 1,5 mm, 2,0 mm y 3,0 mm, adecuado para varios requisitos.
ldglance
Comentado en los Estados Unidos el 20 de marzo de 2025
so i have a raspberry pi 5 with a simple 40mm x 40mm x 11mm. since i had the older minus pad 8 i figured that i would compare the advance performance against the older generation. so i ran some stressberry tests to compare what some different temperatures would look like. 1 with the minus pad 8 with a fan, then with out a fan, then comparing it with the advance. as we can see from the picture the fan obviously helps a lot. but both the minus pan 8 and the minus pad advance both does a good job at keeping the temperature down so that it doesnt throttle. though there is a clear difference in performance between the temperature of the minus pad 8 and advance. we can easily see both starting at the same baseline temps then advance does a better job transferring the heat to the heat sink to dissipate which also helps in the recover time after.very happy with the performance which should help a lot during hot summer days. right now the ambient in the room is 66f
iron
Comentado en los Estados Unidos el 18 de marzo de 2025
These are quality thermal pads for my SSD. I used one pad for an M.2 SSD that's installed inside of an external enclosure. I used the other pad for an M.2 SSD that was installed on my computer's motherboard that has a metal heat sink plate. In both instances, I did have to cut the thermal pads to properly fit on top of my SSD. I just had to take out the plastic piece and from there it was easy to measure, cut, and install.I'm impressed with the heat dissipation that the thermal pads are able to help with. Usually, when I do large file transfers, my SSD inside of the external enclosure would thermal throttle after a while and speeds would slow down. However, with this I'm able to remain at steady speeds without a significant drop in speeds.Overall, I'm very happy with how the thermal pads have helped keep my SSD temperatures low. They're easy to cut and install. The thermal pads compress nicely and I feel confident that good contact is being made between the heat sink and the drive.
P. Cursio
Comentado en los Estados Unidos el 15 de marzo de 2025
Great for the cost, good quality, solid product.
Anthony
Comentado en los Estados Unidos el 12 de marzo de 2025
No se pudo cargar el contenido.
Reviews and Information
Comentado en los Estados Unidos el 18 de abril de 2025
Fancy pads. The width is made for M.2 drives and can be easily cut shorter for SSDs that aren't the full length. 1.5mm thickness is a good balance that still has enough squish. A modern option for newer Gen4 and Gen5 drives.
Productos recomendados
Mex $178.00
Mex $ 99 .00 Mex $99.00
Mex $324.20
Mex $ 178 .00 Mex $178.00