No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Este kit de cazador muestra diferentes gráficos ajustando dos potenciómetros, el gráfico se puede mover rápida o lentamente.
Este es un hermoso kit de cazador LED que es divertido de construir y agradable de mirar cuando termina, no solo es una placa PCB para practicar la soldadura, sino también un regalo decorativo para ti.
PCB de alta calidad, ha marcado claramente los componentes electrónicos, incluso los principiantes pueden soldar fácilmente con éxito.
Herramientas que necesitas
- Hierro (30 W)
- Cable de soldadura
- Multímetro
- Pinzas
- Cortadores de alambre
- Fuente de alimentación: USB o batería
Viene con manual de usuario y archivo PDF en línea, que te guiará cómo terminar paso a paso, perfecto para proyectos de experimentos electrónicos básicos de la escuela. Antes de soldar los LED, se recomienda utilizar un multímetro para verificar si hay algún LED que no sea brillante. Asegúrate de que todos los componentes en la dirección correcta y el lugar correcto; y comprueba si la soldadura de pseudo y flotador, esto es muy importante en la práctica y pruebas.
Joseph little
Comentado en los Estados Unidos el 5 de abril de 2025
No se pudo cargar el contenido.
Joseph little
Comentado en los Estados Unidos el 5 de abril de 2025
No se pudo cargar el contenido.
Joseph little
Comentado en los Estados Unidos el 5 de abril de 2025
No se pudo cargar el contenido.
Joseph little
Comentado en los Estados Unidos el 5 de abril de 2025
No se pudo cargar el contenido.
Joseph little
Comentado en los Estados Unidos el 5 de abril de 2025
No se pudo cargar el contenido.
Joseph little
Comentado en los Estados Unidos el 5 de abril de 2025
No se pudo cargar el contenido.
Joseph little
Comentado en los Estados Unidos el 5 de abril de 2025
No se pudo cargar el contenido.
Joseph little
Comentado en los Estados Unidos el 5 de abril de 2025
No se pudo cargar el contenido.
Nick Rollick
Comentado en Canadá el 21 de mayo de 2024
To preface my review: i've never spent a minute soldering anything before, so I was going into this completely blind outside of watching some tutorials on youtube.The instructions are well written and document every single individual component required to complete the project, and there was never a moment I felt confused or lost due to poorly made instructions. The pictures are pretty blurry, but they ensure to circle every solder point on the board and indicate what numbered component goes where so you don't end up putting a capacitor where it shouldn't go.It took approximately 6-7 hours across two days to complete with the right hardware in hand (heat proof soldering mat, soldering iron, flux core solder, fume sucker, solder sucker, and some copper to remove any accidental soldering plus a multimeter will be handy for testing components prior to soldering). Very fun and simple to do if you have an idea of what you're doing or have worked with small consumer electronics before, but I could see how someone with zero experience working with electronics would easily get lost.I managed to get it working on my first try, but had to replace an LED Diode as it was dead out of the box. I'd recommend this to anyone who wants to learn how to solder and has been working with repairing electronics or computers in the past, but maybe not someone entirely new. Beginners should start with practicing on wires!
Nick Rollick
Comentado en Canadá el 21 de mayo de 2024
To preface my review: i've never spent a minute soldering anything before, so I was going into this completely blind outside of watching some tutorials on youtube.The instructions are well written and document every single individual component required to complete the project, and there was never a moment I felt confused or lost due to poorly made instructions. The pictures are pretty blurry, but they ensure to circle every solder point on the board and indicate what numbered component goes where so you don't end up putting a capacitor where it shouldn't go.It took approximately 6-7 hours across two days to complete with the right hardware in hand (heat proof soldering mat, soldering iron, flux core solder, fume sucker, solder sucker, and some copper to remove any accidental soldering plus a multimeter will be handy for testing components prior to soldering). Very fun and simple to do if you have an idea of what you're doing or have worked with small consumer electronics before, but I could see how someone with zero experience working with electronics would easily get lost.I managed to get it working on my first try, but had to replace an LED Diode as it was dead out of the box. I'd recommend this to anyone who wants to learn how to solder and has been working with repairing electronics or computers in the past, but maybe not someone entirely new. Beginners should start with practicing on wires!
Nick Rollick
Comentado en Canadá el 21 de mayo de 2024
To preface my review: i've never spent a minute soldering anything before, so I was going into this completely blind outside of watching some tutorials on youtube.The instructions are well written and document every single individual component required to complete the project, and there was never a moment I felt confused or lost due to poorly made instructions. The pictures are pretty blurry, but they ensure to circle every solder point on the board and indicate what numbered component goes where so you don't end up putting a capacitor where it shouldn't go.It took approximately 6-7 hours across two days to complete with the right hardware in hand (heat proof soldering mat, soldering iron, flux core solder, fume sucker, solder sucker, and some copper to remove any accidental soldering plus a multimeter will be handy for testing components prior to soldering). Very fun and simple to do if you have an idea of what you're doing or have worked with small consumer electronics before, but I could see how someone with zero experience working with electronics would easily get lost.I managed to get it working on my first try, but had to replace an LED Diode as it was dead out of the box. I'd recommend this to anyone who wants to learn how to solder and has been working with repairing electronics or computers in the past, but maybe not someone entirely new. Beginners should start with practicing on wires!
Nick Rollick
Comentado en Canadá el 21 de mayo de 2024
To preface my review: i've never spent a minute soldering anything before, so I was going into this completely blind outside of watching some tutorials on youtube.The instructions are well written and document every single individual component required to complete the project, and there was never a moment I felt confused or lost due to poorly made instructions. The pictures are pretty blurry, but they ensure to circle every solder point on the board and indicate what numbered component goes where so you don't end up putting a capacitor where it shouldn't go.It took approximately 6-7 hours across two days to complete with the right hardware in hand (heat proof soldering mat, soldering iron, flux core solder, fume sucker, solder sucker, and some copper to remove any accidental soldering plus a multimeter will be handy for testing components prior to soldering). Very fun and simple to do if you have an idea of what you're doing or have worked with small consumer electronics before, but I could see how someone with zero experience working with electronics would easily get lost.I managed to get it working on my first try, but had to replace an LED Diode as it was dead out of the box. I'd recommend this to anyone who wants to learn how to solder and has been working with repairing electronics or computers in the past, but maybe not someone entirely new. Beginners should start with practicing on wires!
Nick Rollick
Comentado en Canadá el 21 de mayo de 2024
To preface my review: i've never spent a minute soldering anything before, so I was going into this completely blind outside of watching some tutorials on youtube.The instructions are well written and document every single individual component required to complete the project, and there was never a moment I felt confused or lost due to poorly made instructions. The pictures are pretty blurry, but they ensure to circle every solder point on the board and indicate what numbered component goes where so you don't end up putting a capacitor where it shouldn't go.It took approximately 6-7 hours across two days to complete with the right hardware in hand (heat proof soldering mat, soldering iron, flux core solder, fume sucker, solder sucker, and some copper to remove any accidental soldering plus a multimeter will be handy for testing components prior to soldering). Very fun and simple to do if you have an idea of what you're doing or have worked with small consumer electronics before, but I could see how someone with zero experience working with electronics would easily get lost.I managed to get it working on my first try, but had to replace an LED Diode as it was dead out of the box. I'd recommend this to anyone who wants to learn how to solder and has been working with repairing electronics or computers in the past, but maybe not someone entirely new. Beginners should start with practicing on wires!
Nick Rollick
Comentado en Canadá el 21 de mayo de 2024
To preface my review: i've never spent a minute soldering anything before, so I was going into this completely blind outside of watching some tutorials on youtube.The instructions are well written and document every single individual component required to complete the project, and there was never a moment I felt confused or lost due to poorly made instructions. The pictures are pretty blurry, but they ensure to circle every solder point on the board and indicate what numbered component goes where so you don't end up putting a capacitor where it shouldn't go.It took approximately 6-7 hours across two days to complete with the right hardware in hand (heat proof soldering mat, soldering iron, flux core solder, fume sucker, solder sucker, and some copper to remove any accidental soldering plus a multimeter will be handy for testing components prior to soldering). Very fun and simple to do if you have an idea of what you're doing or have worked with small consumer electronics before, but I could see how someone with zero experience working with electronics would easily get lost.I managed to get it working on my first try, but had to replace an LED Diode as it was dead out of the box. I'd recommend this to anyone who wants to learn how to solder and has been working with repairing electronics or computers in the past, but maybe not someone entirely new. Beginners should start with practicing on wires!
Nick Rollick
Comentado en Canadá el 21 de mayo de 2024
To preface my review: i've never spent a minute soldering anything before, so I was going into this completely blind outside of watching some tutorials on youtube.The instructions are well written and document every single individual component required to complete the project, and there was never a moment I felt confused or lost due to poorly made instructions. The pictures are pretty blurry, but they ensure to circle every solder point on the board and indicate what numbered component goes where so you don't end up putting a capacitor where it shouldn't go.It took approximately 6-7 hours across two days to complete with the right hardware in hand (heat proof soldering mat, soldering iron, flux core solder, fume sucker, solder sucker, and some copper to remove any accidental soldering plus a multimeter will be handy for testing components prior to soldering). Very fun and simple to do if you have an idea of what you're doing or have worked with small consumer electronics before, but I could see how someone with zero experience working with electronics would easily get lost.I managed to get it working on my first try, but had to replace an LED Diode as it was dead out of the box. I'd recommend this to anyone who wants to learn how to solder and has been working with repairing electronics or computers in the past, but maybe not someone entirely new. Beginners should start with practicing on wires!
Nick Rollick
Comentado en Canadá el 21 de mayo de 2024
To preface my review: i've never spent a minute soldering anything before, so I was going into this completely blind outside of watching some tutorials on youtube.The instructions are well written and document every single individual component required to complete the project, and there was never a moment I felt confused or lost due to poorly made instructions. The pictures are pretty blurry, but they ensure to circle every solder point on the board and indicate what numbered component goes where so you don't end up putting a capacitor where it shouldn't go.It took approximately 6-7 hours across two days to complete with the right hardware in hand (heat proof soldering mat, soldering iron, flux core solder, fume sucker, solder sucker, and some copper to remove any accidental soldering plus a multimeter will be handy for testing components prior to soldering). Very fun and simple to do if you have an idea of what you're doing or have worked with small consumer electronics before, but I could see how someone with zero experience working with electronics would easily get lost.I managed to get it working on my first try, but had to replace an LED Diode as it was dead out of the box. I'd recommend this to anyone who wants to learn how to solder and has been working with repairing electronics or computers in the past, but maybe not someone entirely new. Beginners should start with practicing on wires!
Chris
Comentado en el Reino Unido el 8 de febrero de 2024
This is a great little kit to not only practice your soldering skills but to also have a ton of fun playing with it, took me around 20 minutes to assemble, really simple instructions and the pcb is very clearly marked for each component, the diy aspect really gives you the sense of accomplishment when you've finished building, gives it that nice touch knowing you put it together yourself! This is a relatively easy build for someone with basic soldering skills, worth every penny!
Chris
Comentado en el Reino Unido el 8 de febrero de 2024
This is a great little kit to not only practice your soldering skills but to also have a ton of fun playing with it, took me around 20 minutes to assemble, really simple instructions and the pcb is very clearly marked for each component, the diy aspect really gives you the sense of accomplishment when you've finished building, gives it that nice touch knowing you put it together yourself! This is a relatively easy build for someone with basic soldering skills, worth every penny!
Chris
Comentado en el Reino Unido el 8 de febrero de 2024
This is a great little kit to not only practice your soldering skills but to also have a ton of fun playing with it, took me around 20 minutes to assemble, really simple instructions and the pcb is very clearly marked for each component, the diy aspect really gives you the sense of accomplishment when you've finished building, gives it that nice touch knowing you put it together yourself! This is a relatively easy build for someone with basic soldering skills, worth every penny!
Chris
Comentado en el Reino Unido el 8 de febrero de 2024
This is a great little kit to not only practice your soldering skills but to also have a ton of fun playing with it, took me around 20 minutes to assemble, really simple instructions and the pcb is very clearly marked for each component, the diy aspect really gives you the sense of accomplishment when you've finished building, gives it that nice touch knowing you put it together yourself! This is a relatively easy build for someone with basic soldering skills, worth every penny!
Chris
Comentado en el Reino Unido el 8 de febrero de 2024
This is a great little kit to not only practice your soldering skills but to also have a ton of fun playing with it, took me around 20 minutes to assemble, really simple instructions and the pcb is very clearly marked for each component, the diy aspect really gives you the sense of accomplishment when you've finished building, gives it that nice touch knowing you put it together yourself! This is a relatively easy build for someone with basic soldering skills, worth every penny!
Chris
Comentado en el Reino Unido el 8 de febrero de 2024
This is a great little kit to not only practice your soldering skills but to also have a ton of fun playing with it, took me around 20 minutes to assemble, really simple instructions and the pcb is very clearly marked for each component, the diy aspect really gives you the sense of accomplishment when you've finished building, gives it that nice touch knowing you put it together yourself! This is a relatively easy build for someone with basic soldering skills, worth every penny!
Chris
Comentado en el Reino Unido el 8 de febrero de 2024
This is a great little kit to not only practice your soldering skills but to also have a ton of fun playing with it, took me around 20 minutes to assemble, really simple instructions and the pcb is very clearly marked for each component, the diy aspect really gives you the sense of accomplishment when you've finished building, gives it that nice touch knowing you put it together yourself! This is a relatively easy build for someone with basic soldering skills, worth every penny!
Chris
Comentado en el Reino Unido el 8 de febrero de 2024
This is a great little kit to not only practice your soldering skills but to also have a ton of fun playing with it, took me around 20 minutes to assemble, really simple instructions and the pcb is very clearly marked for each component, the diy aspect really gives you the sense of accomplishment when you've finished building, gives it that nice touch knowing you put it together yourself! This is a relatively easy build for someone with basic soldering skills, worth every penny!
Rai
fully functioning fun for kids
Muhammad Irfan
Some LEDs not working.
Rai
fully functioning fun for kids
Muhammad Irfan
Some LEDs not working.
Rai
fully functioning fun for kids
Muhammad Irfan
Some LEDs not working.
Rai
fully functioning fun for kids
Muhammad Irfan
Some LEDs not working.
Rai
fully functioning fun for kids
Muhammad Irfan
Some LEDs not working.
Rai
fully functioning fun for kids
Muhammad Irfan
Some LEDs not working.
Rai
fully functioning fun for kids
Muhammad Irfan
Some LEDs not working.
Rai
fully functioning fun for kids
Muhammad Irfan
Some LEDs not working.
Productos recomendados
Mex $538.81
Mex $ 290 .00 Mex $290.00
Mex $5,171.31
Mex $ 1,881 .00 Mex $1,881.00
Mex $431.07
Mex $ 219 .00 Mex $219.00
Mex $195.00
Mex $ 105 .00 Mex $105.00
Mex $5,823.10
Mex $ 1,881 .00 Mex $1,881.00