No hay artículos en el carro
No hay artículos en el carroLo suficientemente fuerte como para manejar cualquier carga, la barra estabilizadora de carga HitchMate se puede implementar y ajustar rápidamente sin herramientas. El diseño adaptable permite el montaje en múltiples puntos, a cualquier altura, dentro de la cama para asegurar cualquier carga: cajas, herramientas, botes de basura, suministros de jardín, cualquier objeto de forma extraña. La barra estabilizadora de carga es una solución resistente de grado comercial que proporcionará años de servicio sin problemas. El sistema de carraca de alta resistencia se ajusta y se expande de 50 a 65 pulgadas. Se puede implementar individualmente o en múltiplos para lo último en estabilización de carga. Para un sistema de organización de cama totalmente personalizado para un transporte sin dudas, combina la barra estabilizadora de carga con la barra divisora StabiLoad Artículo #4017, la bolsa de carga NetWerks Artículo #4021 o NetWerks BedBag Artículo #4022. Características de amarre: ajustable, protección UV, resistente a la intemperie
Hector Garcia
Comentado en México el 7 de junio de 2024
Tenía dos opciones en la página, primero me fui por la más sencilla de otra marca y realmente dejó que desear, la cambié por esta y buenísima, es sólida, ciertamente un poco pesada recomiendo ponerla entre dos y como dicen otras opiniones, si no te pones buzo doblas la lámina porque esta muy sólida, pero no hace falta tan apretada para que ajuste, quedó perfecta que hasta compré otra.
Maxell
Comentado en los Estados Unidos el 22 de noviembre de 2024
The build quality of this is second to none. I have used it to hold in multiple 5 gallon buckets of paint and nothing moved at all. I would highly recommend this to anybody who has a full-size truck and needs a robust bar to keep things in place.
Ricardo Ignacio
Comentado en México el 25 de mayo de 2021
Excelente, funciona muy bien en mi Ram 1500 , para separar los artículos o para asegurarles
Carlos O
Comentado en México el 19 de octubre de 2021
Excelente calidad de producto, queda un poco chica en la caja de una VW Amarok pero hasta la fecha a funcionado correctamente.
Ernesto Diaz Rodriguez
Comentado en México el 27 de febrero de 2020
Funciona muy bien para evitar que las cosas se muevan o se dañen por moverse libremente en la batea y es muy sencillo ponerla y quitarla
WallyD
Comentado en Canadá el 28 de octubre de 2020
Very good quality truck bed restraint bar. I prefer this locking mechanism to some that more pure ratchet mechanisms rendering them tougher to remove than to install. This one pushes out a bit as you close the mechanism, meaning you ideally leave it just a bit loose before locking it and it snugs up. It is much easier to remove this way. Very solid unit when installed in my Tacoma truck bed!
Scott S
Comentado en Canadá el 2 de diciembre de 2019
I have the smaller style $30 cargo bar to hold plastic storage bins from sliding around in my truck bed and it does the trick for light stuff and is a one handed install but it bends and wiggles around and no way would I use it to secure anything.If you want to haul heavier or awkward things this Hitchmate cargo bar is a beast.I have used it in in both my landscape trailer to secure things like ladders to the floor or truck tires. Once you get the hang of the space the bar requires to clamp it is simple and when set it holds. It is heavier than the low cost cargo bars and takes 2 hands to install but their is a reason. This thing is built like a tank.I also have the accessory clamp that attaches at a 90 and it is a great add on for stabilizing things from sliding side to side.I'm very pleased with this bar and when you pick it up or put it beside the $30 cargo bars the difference is easy to see. This bar is very well built.Slide it out until it touches the side of the bed, then pull it back a few teeth and test the clamp, it too tight or loose flip back and move one more tooth and try again.After using it a few times I can get it right in one go.The release mechanism works very well allowing for a secure clamp set up and quick removal.So far I'm impressed.
Esteban
Comentado en México el 8 de diciembre de 2018
Es un poco incomoda ya que es dentada y no de rosca ajustable, pero es funcional
O. Fisher Jr.
Comentado en los Estados Unidos el 16 de diciembre de 2016
This is a true Heavy Duty Cargo Stabilizer Bar and it's all metal except for the rubber pads which are molded completely around metal supports. Each pad rotates freely on a pivot bolt. The rack (geared horizontal section) is also heavy duty metal with its terminus firmly thru-bolted to the inner tube. The small silver "lever" located on the side of the housing holding the geared handle is basically a spring-loaded "catch" to prevent the handle from moving once secured. The inner tube appears to be coated with some type of translucent gold colored coating, possibly to make it resistant to corrosion. The outer tube and rack are painted black and while the rack and the handle assembly appear not to be a powder coated finish, it seems to be a good coat. The outer tube appears to be powder coated. Will this damage your truck bed? The shortest width bed this can handle once latched is 59-1/2 inches, so if your bed is narrower than this then the answer to your question is definitely yes. The force this unit can apply if one isn't paying attention and just applying brute force is sufficient to possibly force the sides outward. Once a tooth is selected the inner tube will travel 1-1/8 inches outward during the full-engagement/lever catch process. So divide this by 2, and thus the deflection toward each side wall is 9/16 inches. Each "tooth" you move the inner bar inward results in a minus 1/4 inch total length. So, if your bed width is 64 inches and you extend the bar to 64 inches and close the handle the final length installed will be 65-1/8 inches. Move the inner bar inward to catch the next tooth reduces that engaged total length to 64-7/8 inches, and so on. So you can adjust how much tension you put on your bed sidewalls. My suggestion is have someone assist the first time this bar is used. Place it in one of the desired locations in the bed and install it with the amount of tension to firmly secure the bar. Then while it is installed, measure 1-1/8 inches away from the end of the floating portion of the toothed rack (the part that floats above the outer tube) and use colored vinyl electrical tape to place one wrap around the outer tube such that the edge of the tape is aligned with the aforementioned measurement. To check proper placement of the tape, release the handle and slowly swing it open, and as the bar shortens the end of the rack should line up with that tape's edge. If not, try again. For subsequent uses, just slide out the inner tube until the end of the rack aligns with the tape's edge and close the handle. You can repeat this process for multiple fit locations. Due to its weight, it is a bit awkward for one person to install, however it can be done and the trick is to find its balance point with length about where it's needed, lift it into place and secure handle.
YM
Excellent, very powerful, practical and easy to use. I recommend it
Productos recomendados
Mex $833.05
Mex $ 424 .00 Mex $424.00
Mex $785.47
Mex $ 384 .00 Mex $384.00
Mex $673.38
Mex $ 323 .00 Mex $323.00
Mex $372.38
Mex $ 178 .00 Mex $178.00