No hay artículos en el carro
No hay artículos en el carroMás información del producto
|
|
|
|
|---|---|---|---|
|
|
|
|
|
| Opiniones de los clientes |
— |
— |
— |
| Modelo | 2414NB | LC1230 | 4131 |
| Descripcion | Cortadora de Metal 14" | Cortadora de Metal 12" C/disco de carburo | Cortadora Circular p/metal 7 1/4'' |
| Potencia de entrada | 2.000W | 1.750W | 1.100W |
| Diámetro de disco | 355mm (14") | 305mm (12") | 185mm (7-1/4") |
| Velocidad sin carga | 3.800 | 1.300 | 3.500 |
| a 0 grados | no data | 115mm (4-1/2") | no data |
| a 45 grados | no data | 90mm (3-1/2") | no data |
| Peso neto | 18,4kg (40,6lbs) | 19,3kg (42,5lbs) | 5.1kg (11,3lbs) |
Obed Cardona
Comentado en México el 29 de octubre de 2024
Aún no la uso, pero a la vista se ve de una calidad execelente, muy recomendada
Cliente de
Comentado en México el 7 de junio de 2021
Era justo lo que buscaba, algo a buen precio con buena calidad.
Juannix
Comentado en México el 15 de junio de 2021
La relación precio calidad es excelente.
MARIO HERNANDEZ
Comentado en México el 10 de octubre de 2021
Es un muy buen equipo, llevo muchos años usando este tipo de cortadora y podria decir que es mucho mejor que otras.
J. F. Guzman Perezabreu
Comentado en México el 10 de abril de 2021
Muy útil para esos cortes exactos en tubos de metal sin pelearse con la cegueta. No es un equipo pesado así que lo puedo poner en mi mesa de trabajo y lo guardo al terminar. Viene con medidor de ángulos y el disco da bastantes cortes. Muy como de usar.
Jesús Rafael Arrez Ontiveros
Comentado en México el 26 de abril de 2021
Excelente herramienta, muy buena calidad, se recomienda para principiantes o trabajos casuales.
Jorge Gustavo Arriaga Rivas
Comentado en México el 19 de diciembre de 2020
Aun no lo e usado para poder calificar la precision pero mas de lo que esperaba por el precio que pague dos pequeños detalles en pintura que no afectan en nada ya la encendi y funciona muy vien me agrado
Dan Frag
Comentado en México el 5 de febrero de 2017
La use ya varias veces y no tuve problemas, quizás solo al cortar PTR se tarda uno mas, pero no hay ningún problema, a pesar de que tiene las marcas de los grados de angulo para los cortes, es mejor hacer una comprobación con escuadra o trasportador, y apretar muy bien los tornillos de la guía, ya que la primera vez que la use, se recorrió y quedo mal el corte. pero con ajustar bien los tornillos no hay problema.
ようちゃん
Comentado en Japón el 14 de agosto de 2016
メールを送ったとこ国内使用の為可動カバーはついてないのこと、何故商品画像は可動カバー付きにしてるのか意味がわからない。
HankHillsGuitar
Comentado en Canadá el 6 de diciembre de 2016
Happiness is a well-chopped piece of steel. That's precisely what this does--cut steel magnificently. It'll cut anything else too--it's a giant abrasive blade, what's going to stop it?! Of course, don't just do that. Fires and stuff. Anyway, this is standard Makita fare--it's pretty lovely all over. The base is sturdy, the carry handle is comfortable, the whole thing feels well-balanced when you're carrying it, but most importantly it just works really, really well. All the materials are nice, the finish on the blade guard is splendid, the motor is wonderfully smooth and quiet, and it's a funny shade of blue-green. Awesome. Go get one, it's better than all the others in its class. Just go, get it. Be happy.
Scott
Comentado en los Estados Unidos el 17 de enero de 2016
This was a GREAT purchase! I almost went cheap and thought about buying a Harbor Freight cut off saw, but I looked at a few reviews and realized my time is worth more than it takes to buy and return a bad tool. So, spending 3 times as much, I went for the Makita. So, cudos to Amazon, it arrived in two days in perfect condition. Unboxing, found it drop dead simple to use. Went to work today making 25 cuts in cold rolled steel channel material to build a brew stand for my son-in-law. Based on the reviews I went very slow for the first dozen cuts, then started to push a bit harder. Much to my surprise the cutting started to go much, much faster. There was more burring of material, but for the dramatic increase in speed it was well worth it. When done, I had only used an inch or so of blade material. All the cuts were perfect, 90 degrees. Oh, I had it plugged into a powerstrip that measured AMPs and when pushing hard we were bouncing between 16 and 20 amps, so if you are running on a 15amp service you may need to go easy. All in All a GREAT purchase. I'm sure this tool will give me decades of great service.
MCB
Comentado en los Estados Unidos el 8 de abril de 2015
When the company I worked for wanted to get a chop saw they chose me do to the looking. After spending time in the Navy as a BT and later as an outside machinist in the local shipyard I figured i could handle it. The 2 things I was looking for was something that didn't way a ton and was well built. When I found this Makita I knew it was just what we needed. We cut a lot of 4x4 1/8 tubing, mostly hot rolled and some 1/4x4 flat bar cold roll and this saw handled it with no problem. When it came to cutting aluminum I put on a carbide toothed blade and it ate through that aluminum like it was hot butter. I liked it so much I bought one for my home workshop and after 12 years it's still going strong. And if you ever get a chance to watch that old Monster Garage or OCC tv shows, guess what ? Yea they use the same saw.If you can not afford a $600 cold saw and / or a $900 horizontal band saw, this is one that deserves your attention.
Ger Coffey
Comentado en el Reino Unido el 3 de diciembre de 2013
Ordered the 240V and i received the 110V ended up having to buy a transformer that i didnt want to really buy
Productos recomendados
Mex $5,790.00
Mex $ 1,881 .00 Mex $1,881.00
Mex $10,789.37
Mex $ 1,881 .00 Mex $1,881.00
Mex $2,467.46
Mex $ 1,061 .00 Mex $1,061.00
Mex $2,358.76
Mex $ 1,108 .00 Mex $1,108.00
Mex $3,710.70
Mex $ 1,484 .00 Mex $1,484.00
Mex $27,399.00
Mex $ 1,881 .00 Mex $1,881.00