AxiomXIII
Comentado en los Estados Unidos el 18 de marzo de 2025
I've been printing on this plate for a little over a month with no issues. I began printing using stock settings for the textured PEI plate which worked wonderfully. I have since dropped the plate temperature little by little and I'm now printing with the plate temperature at 30° C with no additional adhesive or release agents, (such as glue stick or hairspray,) and still see no issues.I am printing exclusively objects that require no support or brim, in PLA Silk so printing with other materials may see different results. While I have never had any issues printing on Bambu's standard PEI textured plates, I see this is a great alternative and, if you are willing to make sure that you are printing at lower temperatures, it may save you a bit in utilities over time.
Frank C.
Comentado en los Estados Unidos el 5 de febrero de 2025
I bought this for my brother’s Bambu Lab A1, and he says it works well. However, he’s not a fan of the non-uniform texture. If that’s something that might bother you, it may be worth considering other options. But if texture isn’t a concern, this is a well-priced build plate that does the job.
21Handicrafts
Comentado en los Estados Unidos el 3 de febrero de 2025
I have several Juupine holographic build plates and love them, so I was interested to see how they would do with a cryogrip type plate. This is different than your average build plate--it has an almost tacky to the touch finish on it. It says right on the plate that you can only clean it with a damp towel, and you should not use alcohol/IPA.Well, I wasted no time and, to test it out, printed my most troublesome print, the one that is tall and tippy and needs great adhesion to prevent disaster. The plate did amazing--most hassle-free print I've ever had of this project, including compared to other high-adhesion plates. My models came off the plate with ease but the brims I printed did not. I've tried putting it in the fridge but it didn't help. I can't take a blade to it without damaging the coating. The only thing that is working is to pick away at it with my fingernails--only 30 little mouse ears to go. The fact that I am willing to do this is a testament to my desire to continue using the plate.UPDATE: I put the plate in the freezer and the remaining mouse ears came off with a lot less work.FURTHER UPDATE: This is now my go-to supertack plate, the only one that gets the job done 100% of the time with difficult prints. Although I received the first one free as a reviewer, I have since purchased two more.
liddster
Comentado en los Estados Unidos el 20 de abril de 2025
This thing is STICKY... Your prints will stick to this bed like glue. I've had ZERO print sticking issues but you have to watch out for small fragile prints as this bed might not be the one to use. It sticks so well, when you go to remove the smaller parts, you break or bend them. But for anything else, it's my go to print bed. The texture is more noticeable but it's a textured bed so that's to be expected. Just maintain the bed and clean it from time to time and you'll love this one.
vinereviewer1984-12
Comentado en los Estados Unidos el 18 de abril de 2025
After struggling with adhesion issues on my Bambu Lab A1, this SAHVAIM PLU build plate has completely transformed my printing experience. The first layer adhesion is remarkably better than the stock PEI sheet that came with my printer.The most impressive feature is the room temperature printing capability. I can now print PLA without turning on the heated bed, which has noticeably reduced my electricity usage while maintaining perfect adhesion. No more worrying about drafts affecting adhesion - even thin-walled prints stay firmly attached throughout the entire process.Print removal is significantly easier than with the stock surface. A gentle flex of the plate and prints pop off cleanly without requiring tools or excessive force. This has eliminated the small nicks and scratches I was getting on my original build plate from using removal tools.Edge warping is completely eliminated on larger prints where I previously had issues with corners lifting. The surface consistency is excellent across the entire plate - no more "sweet spots" where adhesion works better in some areas than others.Durability appears excellent after about a month of daily use. Following the cleaning instructions (just water, no alcohol or solvents) has maintained the surface properties perfectly. For anyone with a Bambu Lab printer looking to improve first layer reliability while saving energy, this upgrade is well worth the investment.