No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Mueve tu banco de trabajo a cualquier área de tu tienda con nuestras ruedas de banco de trabajo de 360°. Este juego de 4 ruedas funciona simplemente empujando hacia abajo los pedales para levantar tu banco de trabajo del suelo.
El paquete de 4 ruedas para banco de trabajo incluye todos los tornillos de montaje necesarios para una fácil instalación.
Varias aplicaciones
Montarlo en cualquier tipo de banco de trabajo
Duncan Hill
Comentado en Canadá el 31 de julio de 2024
My order came quickly and included all the necessary parts - even tools. I mounted the 4 casters on the twinned 2x4 legs of my workbench. The bench is heavy - made up of double 2x4 legs and stringers and a solid core door for the work surface. The instructions were clear enough to figure out. It will be interesting to see if the mounting screws will hold the weight of the bench over time or eventually loosen and tear out. Keeping the casters in the "up" position will at least keep the weight on the legs where it belongs and not on the casters and their mounting screws....you just have to remember to tip the casters up. The casters roll the weight of the bench really well and saves me from walking the bench into position by moving one end, then the other.
Gavin
Comentado en Australia el 15 de julio de 2024
Does what it says on the tin.Happy with them
Edgar Heliodoro Torres Chavez
Comentado en México el 24 de enero de 2024
Su kit de instalación completo y las indicaciones para instalar incluyen plantilla para ser preciso
T.A.L.
Comentado en los Estados Unidos el 14 de septiembre de 2024
I have a large cement-floored barn. I had some extra kitchen/dining room tables that I wanted to use as worktables instead of letting them just sit disassembled gathering dust. But I wanted to keep the floorspace of the barn easily re-configurable since I do oil changes and other vehicle maintenance in the building and need to be able to quickly clear floor space.For the first table, I used some old, but high-quality metal-framed-with-bearing office chair casters. They work and they were free, so I am just going to keep using them. But for the second table, I ordered these.The better relative usability and suitability is clearly evident. The first table with the re-purposed casters rolls but is hesitant to move and I can’t let it down on the legs.These roll much easier, and I can let the table down on the legs for extra stability if needed.Installation was simple enough. As others have mentioned, there may be a slight learning curve with your first caster as the instructions (or rather lack thereof) are unclear. But after learning and seeing the process, it is easy enough.The included fasteners are of decent quality. I pre-drilled all the holes and none of the screws stripped out when installed with an impact driver. But I’ve had enough experience with these types of products to see that if you did not pre-drill, these would almost certainly strip out.The included “disposable wrenches” are actually of quite high quality. I had an entire workbench full of wrenches and sockets sitting 6 feet away during installation and I just kept using the included “disposable” tools. Sometimes tools like that are terrible but in this case they are excellent for this specific application.After installation, I tested both tables rolling up and onto some thin carpet. The re-purposed casters struggled. These did so easily.
Emilio Sandoval
Comentado en México el 4 de abril de 2024
Excelente calidad por el precio. Construcción robusta y buenos acabados.
daniel B.
Comentado en Francia el 16 de octubre de 2022
roulettes ideal pour bouger un table de massage tres lourde , le systeme le levier est tres bien pensé et cela se fait sans aucun effort. je recommande fortement
Old Salt
Comentado en el Reino Unido el 3 de septiembre de 2021
To put it into context: I have two large (and very heavy) workbenches made from what was once a wooden conservatory. They are the same height, one is used for fixed power tools and the other for assembly. Since they are the same height they form a convenient saw bench for sheet materials.I wanted to make the assembly bench mobile without changing the height or losing the stability provided by 64 square inches of contact between the wooden legs of the bench and the garage tiles. Screwing casters into the bottom of the legs obviously wouldn't work.These are easy to fit (once you have co-opted an friend the manhandle the bench onto its back). I recommend using a square to check the mark up even with the template. I used longer screws than those provided. The bench was the right way up again in under and hour.End result: It doesn't take a lot of effort to operate the levers and once lifted the bench moves easily. When dropping it back onto the ground the last leg goes down with a bit of a thump!They do what I wanted; the bench is mobile without changing the height and is still rock steady with the wheels up.
Productos recomendados
Mex $268.84
Mex $ 153 .00 Mex $153.00
Mex $199.80
Mex $ 117 .00 Mex $117.00
Mex $2,499.99
Mex $ 1,224 .00 Mex $1,224.00
Mex $663.00
Mex $ 304 .00 Mex $304.00